Steinberg's New UR-C interfaces

[@tomconklin4901]

48 Volt switch on the front of the UR44C. THANK YOU!

[@bassmana2z686]

This is an excellent review and the only one on KZbin that I've seen that looks in detail at Cubase integration.

[@donvittoriosierra]

I'm loving the value of these interfaces with the built in effects. It will make a slow computer more useable with ableton now

[@leonardovmusic]

Just got mine!

[@ericsolomon3318]

What is your opinion so far?

[@leonardovmusic]

@@ericsolomon3318 so far so good, it fits all my keyboard needs.

[@mikehunty20]

Nice review, thank you.

[@ericsolomon3318]

I have ur242 and have been looking to upgrade. I was looking some others but after seeing this review, I think I'm sticking with steinberg. The new mixfx dsp looks good as well.

[@tubeman1983]

Will it be a version of those interfaces with the Rupert Neves preamps?

[@WerIstWieJesus]

Wonderful. One thing has not been explained: the scenes. Is there a way to change scenes by MIDI?

[@FlatTire]

No

[@WerIstWieJesus]

@@FlatTire ... then there is a firmware update needed!

[@olafkliemt1145]

dynamic range ? noise (EIN) ? ASIO driver and latency ?

[@BrettNoack]

Some details are covered here... but Pre-amp dynamic range was measured at 102.9dB (A weighted). The converters are capable of 32bit integer, so better than most. EIN was measured at -123.3 dBu (A weighted). Steinberg invented and developed ASIO so no issues there. Latency has more to do with sample rates, buffer sizes and PC power (processor speed), so this device is similar to most other audio interfaces.

[@BrettNoack]

Sorry forgot to reference the source for the tests. kzbin.info/www/bejne/hoTEY2qeoM9mfZo

[@rocknets]

Hello Dom, It would be great if you could speak with your colleagues and ask them to respond to support tickets. The DSP reverb does not seem to record into my DAW. But all other DSP effects seem to work. Why is this? Seems like a bug to me.

[@yams900]

Good work guys ! Got my UR44C today, should be good :) Do you need external power when mobile ?

[@wojciechstecyszyn6040]

On ur44c can you monitor in mono?

[@jordanharkness]

It's now 2020 and Cubasis 3 for Android is available. Is that also included in the purchase of my new UR44C? ... I guess I'll find out when it arrives.

[@Paultheguitarist]

Weird that the mix knob is on the 22 but not the 44.

[@retrowaynie7193]

Why no app for android?

[@princessl.d.g.]

Does it power 250 ohms headphones?

[@sirnigelcogs]

Has the noise EIN on the preamps been improved?

[@Momointvland]

Will it work with Facebook Live using a iPhone?

[@thelynngentry]

I am thinking about buying a UR44C, after briefly researching a Solid State Logic SS2+ and Focusrite Scarlett 8i6. I am not sure if you have reviewed them yet and am wondering if you have any knowledge of how they compare?

[@reysaw]

i'm also waiting for a same comparison with focusrite 4i4 and UR22C for my purchase decision.

[@thelynngentry]

@@reysaw I did some further research of reviews and decided to get a MOTU M4 instead. I found Julian Krause reviews to be very helpful on making my decision.

[@reysaw]

@@thelynngentry thanks for sharing the Motu, seems like I might just got for Motu M2 usb 2.0)instead of UR22C (usb3.0/3.1)

[@AleLoy]

is it using 3.0 protocol for the speed or just for bus power?

[@calebsawyerr3545]

just power

[@aloysiuschow7466]

Both. I dont think there is a way to transmit 3.0 speed through a USB-Type B connector. Still reading on the product manual to check on these answers: download.steinberg.net/downloads_hardware/UR-C/Manuals/UR22C_Startup_Guide_English.pdf

[@doctorsynth1]

What’s that yellow laptop? Looks cool.

[@MrPMOSullivan]

What is the advantage of doing a low cut in the app instead of cubase eq? I can only see a disadvantage as I might cut to much low and can't go back.

[@sharksatbay1]

The main advantage is that the EQ is running off the processing power inside of the unit itself, not your CPU. Another advantage is in case you want to livestream for example, most likely for livestreaming application does not support VSTs. Discord could be another example, if you'd like to clean up your audio before Discord picks it up, you can use the compressor/eq effects using the built in DSP.

[@Pharesm]

A music store is advertising this as having "6 to 8 line inputs" How do you access getting 8 line level signal inputs to your non-Cubase DAW? (using Reaper, Studio One and Sonar)

[@luapmartin]

Hi, great I can see that the integration between Cubase and UR-C interfaces is really good to monitor or record. But how is the integration with Cubasis 3 on iOS device ? I would like to use Cubasis 3 and from the UI be able to access the DSP of the UR44C directly to monitor and/or record. Prefer not to switch between App and use only Cubasis 3 otherwise if there is no advantage of using Cubasis with a Steinberg Interface then I think that I would stick to other iOS daw and or interfaces. Cheers, Paul

[@tastenthomi]

Will this also work, if you want to use it on Skype or zoom? Like you are a piano teacher, and want to talk with you students by iPhone (videoskype) and use a better mic than the iPhone solution. So you use Steinberg UR-C and play on the grand piano, record it on mics, and send it over Skype to the students iPhone?

[@PlayGameToday]

Today I get UR44C, and how to add FX to the DAW strip channel or at Master channel inside dspMixFX?

[@majkon93]

Is it possible to use internal DSP in Steinberg UR22C for third party plugins (e.g. Neural DSP)?

[@propyne717]

Can 44URC record in different 4 track s in Adobe audition??? Does Curbus required for this action??? Plz please post a detailed 44urc configuration tutorial for win10 ?? Unable to do lisencing and activation.

[@thedoodler882]

What's the preamp EIN on the ur24c and ur44c?

[@divobayer2960]

Hi I have a question can I use the dspMixFx to my MacBook Pro for streaming

[@palesama]

The four preamps at the front can work simultaneously with the 2 mic instrument inputs at the back of the unit?

[@sumanchoudhury3274]

YUP

[@samueljoseph1867]

Best interface i guess. But i have some doubts to be clarified 1. Is there a mono option in ur44c as in ur22c? 2. 6 inputs in Cubasis iPad, but how many outputs (mono) does it show in Cubasis? 3. Can i send daw/mainstage mono out through a single L or R channel? 4. Does direct monitoring run 4 inputs to 4 outputs on ur44c as compared to other brand interfaces?

[@credit_soo]

can it work when PC is power off?

[@Emilioh888]

I'm wondering the same

[@danielerlichofficial]

It the interface gets the power from the PC so probably not, the computer must be on

[@jasonreyes_]

I have the UR44C I getting trouble to get it work with my iPhone 12 Can you help me to solve it? I seeing it is easy on the UR22C but the one that I have is different in the back.

[@CyberTechOfficial-h7n]

I try to buy UR24C on Steinberg website.... but it`s impossible !!!!

[@robh3702]

If purchased does the Yamaha vintage collection work with these interfaces? Or would they just be native plugins

[@sumanchoudhury3274]

Hi, the video helped me a lot. I have one confusion, the interface has six analog outputs. But I can Make only 2 pairs of stereo busses in cubase. I cannot turn off the reverb effect from the rest output pair. Can I use 3 different pair with this interface ? Please guide.

[@dopesickhurts]

Does the headphone output still suck on these Steinbergs? I used to own the UR22 and it could barely drive a pair of 32 Ohm headphones to sufficiently loud levels.

[@ghastlybat107]

I'd like to know that also, he must be too busy to respond to questions. "still suck" (lol)

[@calebsawyerr3545]

you just need the right headphones with higher ohms

[@aloahe4807]

@@calebsawyerr3545 higher ohms means worse lower output lol.. you dont have plan.

[@danielerlichofficial]

@@aloahe4807 I'm doing the voiceover and I'm also looking for an audio interface that has a powerful headphone amp so I can hear myself while I'm recording, from what I see there is no such thing in these prices an audio interface that has a loud headphone amp, I will just buy an audio interface and in addition another headphone amp (shouldn't cost more than 30 bucks)

[@niirvax2020]

ur22c has 0 analog inputs TRS and the ur44c has two of them, why you need them? what's the utility of this analog input?

[@vinaykumarsvrdigitech3883]

I am using pc mac el capten.ur816c compateble...pl sugesh....

[@MrFrankman13]

how does it works usb 3,0 2.0 was bad realy bad bougt it and was veryvey laggy :so know you are all happy with that ;then i can give a try ;hoh you think gysß plz giv e me your expierence .thx

[@simonsmith2642]

So I can track vocals, with EQ compression and verb with no latency? Vocals are a real pain in the butt, unless I use extra hardware. Going through the box the latency is impossible to work with on vocals.

[@kalpeshpatel7270]

hello i really like this products but i have questions if you slove and give me reply..i baught ur22c how can i connect to I pad and My laptop same time because i need to use dspfxmix from i pad and need to put in put to my laptop through obs studio.how can i set it up please if you give me any reply. thank you in advance, kalpesh patel.from toronto.

[@heartbeats8442]

I tried for updating the firmware of urc2 using the firmware update tool. But it not working now , only blinking the peak LEDs . Could you please tell me what to do.

[@alcarazfranck9952]

Hi. Thx for this great review. I have a question about the headphones output level of the ur22c. I red that it is quite low. i have a Beyerdynamic DT 770 80 ohms and i don't know if this interface is well suited for this impedance level. I want to record tenor saxophone with a playback in the headphones from Cubase so i need a decent output level to hear the playback while i play the sax, which is a pretty loud instrument. Or should i upgrade to a dc powered interface such as the ur-rt2. Thanks for your answer. Franck.

[@danielerlichofficial]

I'm doing the voiceover and I'm also looking for an audio interface that has a powerful headphone amp so I can hear myself while I'm recording, from what I see there is no such thing in these prices an audio interface that has a loud headphone amp, I will just buy an audio interface and in addition another headphone amp (shouldn't cost more then 30 bucks)

[@alcarazfranck9952]

Daniel Erlich ok thanks. I had the same answer (external amp) from other comments. I finally purchased the URRT2 which has a much power headphone amp than the ur22c (and a great sound), and the level is good with my DT770. But nevertheless i think that your advise of an external amp is the best option. Bye. Franck.

[@dejansavic8986]

I want to buy UR44C. I have some doubts about usb-c connector. Is it going to work on my laptop ASUS n61j with Windows SP1 or should I go with USB 2, that is UR44C?

[@NAIM815]

Anyone have solutions for the dropouts on the UR MkII (other than buying a new one), I’ve tried all the updates and the other DC input

[@ronanzann4851]

Wait.......are they saying the units use actual "32 bit CONVERTERS" ??? I didn't think there was such a thing ???? And of coarse I realize we can all use 32 bit or 32 bit- float file sizes in our DAWs and what not, but we still only have 24 bit analog to digital converters. I thought we were years past this kind of technological ambiguity ?

[@RealMacoy]

How can i use this in my iPad or iPhone for Karaoke using KZbin karaoke songs and live stream to my facebook? Your response is appreciated.

[@BrettNoack]

Please don't!

[@chrisnieto5547]

Android????????

[@as10046]

Interesting onboard DSP capabilities and mobile support. Something tells me that Absolute Music would have been better at describing the specs and technical aspects of the interface than the Cubase rep.

[@rohankarkiran23]

Why loopback is disabled when I connect my UR242 to dspMixFx app on my iPhone? I wanted to enable loopback so that I can use it for live streaming.

[@drritu9851]

Dear Sir/mam I have old laptop Window 7 , 32 Bit , 4GB Ram , This Audio Interface Steinberg ur 22 C will work on my laptop , and it will give me professional Quality ?

[@drritu9851]

@Ferretti Maurizio you mean This Audio Interface is not perfect for my computer

[@thelantern9075]

Will these interfaces work with Windows 7 SP1 32 bit? I’m still running Cubase SX3. Will Cubase AI run on my system? I heard it wouldn’t. My computer only has 2 gigs of RAM, but I don’t use any VST or plugins, just use the software as a recorder really.

[@watchornot3139]

the device will, the software wont so... ya they should update the box

[@j.v.1493]

A pity that the 22Cs Preamps are worse now than most competitors. Even the version before was was way way better.

[@generalawareness101]

32bit int is crap in todays world. Nice it can do 32 bit but should have been float and that would have been something for marketing to run with.

[@GratefulSam-et3ve]

steinberg support is terrible