In getting this old Panhead to run down the road again, reinstalling the kickstart assembly and clutch arm onto the bike.
Пікірлер: 396
@pqtpat77342 жыл бұрын
The best Harley content around. The Mike’s are legends
@pacificmike95012 жыл бұрын
Thank You. We try.
@MrBadgas2 жыл бұрын
Looked darker than most exhaust pipes. Must have been cranked over for days and weeks with nothign but soot belching out to get that black. One thing i'm certain of, Once you get it cleaned up and adjusted and the timing set properly, it will start like it's supposed to. Cheers.
@bornonfire4522 жыл бұрын
Except one thing you cant get anuff of mike . Every time he ends the video he leaves you of wanting more and cant wait till the next one.😅
@cameramanmike20722 жыл бұрын
😊
@genecappelletti66912 жыл бұрын
Mike, thank’s for keeping it real. The guy’s that cut out their problems and mistakes from their video’s aren’t doing us any favors. We need to see that too so we can understand how to deal with them and that even the pro’s have issues.
@pacificmike95012 жыл бұрын
We all start out the same. When you get on your bike, that you just worked on, and go enjoy riding it, you are most definitely a winner. It's a personal victory, every time.
@michaelmorgan3832 жыл бұрын
@@pacificmike9501 And when a part falls off and you still make it home It's an adventure. And you go out and buy another tube of Lock Tite.
@davepelfrey39582 жыл бұрын
Momma said you'll have days like this. Way to stick with it. I was rooting for you. LoL
@pacificmike95012 жыл бұрын
Thank You
@kurtruppenthal95062 жыл бұрын
Boy. That fought ya. I had to laugh, we've all been there. Great job, Mike.
@pacificmike95012 жыл бұрын
Glad you enjoyed it
@alnglenn2 жыл бұрын
I thoroughly enjoy watching your videos Mr Mike. A master at work. BTW, great voice!
@pacificmike95012 жыл бұрын
Thank you kindly
@ttjbiggunner20252 жыл бұрын
Mike you seem like such a great guy I think of you as the old-school California befor all the crazy
@pacificmike95012 жыл бұрын
Thank You. I don't know if I'm old enough to be "before the crazy," but I'm before a lot of stuff.
@cameramanmike20722 жыл бұрын
👍😊
@2ndborn1862 жыл бұрын
Thanks for not editing the mistake out. When people are in my shop the rule is to leave the egos outside the door. Thanks for keeping it real.
@pacificmike95012 жыл бұрын
Egos can certainly slow things down and hurt feelings. I say this over and over: "We all start in the same place."
@edwardlynch90322 жыл бұрын
Once again, there's no substitute for experience, perseverance and three pairs of hands. Great content.
@pacificmike95012 жыл бұрын
Thank You
@shanecoker85662 жыл бұрын
When the clutch arm wouldn’t go on and you started breathing heavy, I was waiting for you to inform the arm that it’s parents were not married. I really like how you show everything doesn’t just slip back together. 🍻😎
@pacificmike95012 жыл бұрын
I try to do it as it happens. These are the issues you may have. Just trying to be real. Thank You.
@robertking82982 жыл бұрын
Hi, It's so refreshing to see the the struggle and persistance to get these things apart and back together. I have a rare 1985 superglide that I bought new and early on, about 34 years ago, I replaced the kicker gear and didn't think much of it back then. Now I have the bike disassembled in the driveway ,replacing the throwout bearing. What a night mare. It seems like this bike is a collage of 1off parts cobbled together to make a one year one model EVO with a 4 speed. Harley engineering didn't improve much.My Road king headlight needs to be disassembled just to adjust the handlebars.
@pacificmike95012 жыл бұрын
It is, what I think of as a "transition year." Harley was going to five speed transmissions in most models. There were new models and apparently things still in stock from previous models. Evos with four speeds and both dry and wet clutches. FXR's getting developed. They were all good bikes, just caused a little confusion. The best thing you can do is buy a factory service manual and a proper parts manual for your 85. I went through all of that when they were new. Depending on a parts man who is familiar with these changes is hard to do. Depend on yourself and realize that most aftermarket suppliers will give you their part number and an o.e.m. number from Harley. It's the same kind of research a restorer has to go through.
@oldchevytruck43402 жыл бұрын
Thank you You are giving me the inspiration and knowledge to get back to work on my 52 FL thanks again
@pacificmike95012 жыл бұрын
Cool. Look at some of our previous videos. Go to our KZbin Homepage and click on the word "videos." We have a bunch of videos with a lot of stuff on my personal 52 FL.
@concrete9812 жыл бұрын
mike, thanks for not staging the kicker problem like other videos. a 74 year old harley, things aren't going to fit like a glove.
@pacificmike95012 жыл бұрын
No, I just do it and hopefully, things will go well.
@gillpavon49672 жыл бұрын
I like bikes like this one, showing it's age.
@pacificmike95012 жыл бұрын
It has no choice. We'll clean her up a little as we go.
@gilpavon52572 жыл бұрын
Mike, a bike like this one in decent running condition how much do you think I could offer nowadays?
@michaelmorgan3832 жыл бұрын
I almost lost it when you said I wish I had my rawhide mallet. I do most of the major cooking in the house but I used to find my leather mallet in the kitchen, because the wife would always take it out of the garage and use it on all kinds of things. So I bought another one at an estate sale 3 weeks ago. $1.00 saved me from a potential argument. It's my own fault for using her as my apprentice for the last 20 years. She's really quite talented. Thanks for the information once again.
@pacificmike95012 жыл бұрын
And there you have it folks, "One more use for the rawhide mallet." It can be utilized as an aid to supporting a healthy married life. Thank You. Happy couples are wonderful.
@michaelmorgan3832 жыл бұрын
@@pacificmike9501 It took about a year after we started living together to get her on her own Honda rebel 250 then her motorcycle license. then a rebel 450 and on the highway all needed work but we made a profit, and now she has a sportster 883low.
@kennethpascual13122 жыл бұрын
Great video Mike ! Learning a lot Thanks Kenny
@pacificmike95012 жыл бұрын
Glad to help
@onlyhereonce72902 жыл бұрын
Another solid video. Thank you for sharing.
@pacificmike95012 жыл бұрын
Our pleasure!
@davidalexander39902 жыл бұрын
Very good I admire your patience and control of your language and knowledge of the old bike can't wait to hear her fire up.
@pacificmike95012 жыл бұрын
You and me both!
@stanleyroberts43812 жыл бұрын
Lovin the panhead refresh 👍 keep up the good work!
@pacificmike95012 жыл бұрын
Thank You
@getoffmygrass69742 жыл бұрын
Good morning Mr Pacific, Cameraman Mike. A wise man once said “and there it is…” I’ve never owned a kickstart HD, yet but after seeing you do it a few times, including other videos, I feel confident with all the knowledge provided here, I’ll be ready to tackle it head on, when the time comes of course, which at that point “Mike what’s this do” , “Mike how do I assemble this” 😂 but you know it to be true. I wouldn’t want to ask another but you for advice, not that there aren’t plenty of good qualified mechanics, you’re just my favorite and your word is bond. Take care of yourself Mike!
@pacificmike95012 жыл бұрын
Wow. Thank You.
@user-qg9ry3qn8z2 жыл бұрын
You are the only one on KZbin who share the assembly & disassembly Harley components in details!! Thank you sooooooo much Mike!! Keep up the hard work.. You deserve more than 1 million followers.. Love you man
@pacificmike95012 жыл бұрын
Wow! Thank You.
@haroldwiser26412 жыл бұрын
Knowledgeable, methodical and unflappable. Three things I would like to be! Thanks for another informative video 👍
@pacificmike95012 жыл бұрын
My pleasure!
@kevin60702 жыл бұрын
Always enjoy watching videos well done 👍 Mike
@pacificmike95012 жыл бұрын
Glad you like them!
@rustymacneil32272 жыл бұрын
Wish we had this stuff 30 yrs ago when working on my Pan, learned that the hard way on bringing the kicker back. Amazing what ya learn when ya have to do it twice!
@pacificmike95012 жыл бұрын
We all start out the same. Thank You.
@darrell33682 жыл бұрын
Mike I am still looking for you on the South Georgia roads but I haven’t seen you yet ps great shows and learning a lot thanks for sharing Mike and Gods blessings for you
@pacificmike95012 жыл бұрын
Thank You, and the best to you and yours.
@ronetuley2 жыл бұрын
Great video Mike, thank you for sharing your knowledge. Your videos are a huge help for me, I myself is building an old 58 FL Panhead in a 1954 Harley frame. I study your videos closely for my project. And once again, thank you Mike. Ride safe my friend.
@pacificmike95012 жыл бұрын
Glad to help. Great combination you have. Very good stuff.
@markusengel50082 жыл бұрын
Moin, thank you that you three guys decided to do videos!! I really love my parts book and the repair manual too, but to see how to do all these tasks and get additional information, get your secrets and hints, makes it more easy for me to work on my 1971 FLH. Thank you Mike, that you share all your wisdom and knowledge with us!! Your KZbin Channel ist outstanding!!!!
@pacificmike95012 жыл бұрын
Thank You.
@cameramanmike20722 жыл бұрын
👍😊
@arthurleino2 жыл бұрын
Great video! Watching this, makes me feel good that I kept most of my dead Blow mallets.
@pacificmike95012 жыл бұрын
You bet. One should have them in all sizes and materials.
@dejonsmall98862 жыл бұрын
Mike, it's never a screw up, it's learning opportunity!!
@pacificmike95012 жыл бұрын
Wow! I've had some great opportunities! And all this time I thought I was screwing up.
@vernegibb6212 жыл бұрын
Love this build old road dogs are the best bikes.
@pacificmike95012 жыл бұрын
Sounds like fun to me.
@vernegibb6212 жыл бұрын
@@pacificmike9501 cant say that when i take a 🔧 to something bad things happen .
@MrBadgas2 жыл бұрын
Good to see each bite sized step along the way. Looking forward to seeing the carbituder come off. I know how you love your Linkerts. That will be fun.
@pacificmike95012 жыл бұрын
Wait 'til you see it. It's the worst I've ever seen.
@MrBadgas2 жыл бұрын
@@pacificmike9501 Looked darker than most exhaust pipes. Must have been cranked over for days and weeks with nothign but soot belching out to get that black. One thing i'm certain of, Once you get it cleaned up and adjusted and the timing set properly, it will start like it's supposed to. Cheers.
@2000tc882 жыл бұрын
Really enjoying these Mike, Kudos to Mike on the Cam also. Good work. 👍
@pacificmike95012 жыл бұрын
Glad you like them!
@marcuslambert21622 жыл бұрын
heya Mike was glad to see a new video & knowing youre all good, yep its earned the right to a few little whiskey dings, that first time i was thinking that went way easy even for Mike
@pacificmike95012 жыл бұрын
Thank You
@MrThatnativeguy2 жыл бұрын
Howdy there Mike , have an awesome day and I’ll see you out on the road!
@pacificmike95012 жыл бұрын
Cool. You do the same.
@MisterHarleyRider2 жыл бұрын
Just recently found your channel and it instantly became one of my favorites.
@pacificmike95012 жыл бұрын
Glad to hear it! Thank You
@elsdp-45602 жыл бұрын
Thank you for sharing. Enjoyed.
@pacificmike95012 жыл бұрын
Glad you enjoyed it
@rustyshovel87712 жыл бұрын
Mike, no mistakes in our world ,only happy little accidents…lol Love this project can’t wait to see if you continue the next day …
@pacificmike95012 жыл бұрын
Videos take a little time. More very soon though. Thank You
@thomaslynch20832 жыл бұрын
thanks for answering my question about the compensator on my 46 nuckle . It cam in 3 bushel baskets and a frame
@pacificmike95012 жыл бұрын
Glad I could help
@celtics93482 жыл бұрын
You have a wealth of knowledge and are a natural teacher. Fantastic content I am hooked.
@pacificmike95012 жыл бұрын
Wow, thank you!
@MaxxDoberman Жыл бұрын
It's good to know there are still a few good mechanics that take pride in what they do. Notice how precise and careful his is when he works.
@pacificmike9501 Жыл бұрын
Thank You.
@jasonallen38422 жыл бұрын
Sometimes it requires a little time. And you get off. Relax ,chill bro. You are rocking it.thank you for your help. I always dig your content. Keep it up.
@pacificmike95012 жыл бұрын
I appreciate that. Thank You.
@c798912 жыл бұрын
Nice to see I am not the only one who struggles from time to time with re-assembly. Thank you sir...
@pacificmike95012 жыл бұрын
Glad to help
@ralphtieleman49502 жыл бұрын
Good afternoon ! Thank you for this video.
@pacificmike95012 жыл бұрын
Thank you too
@johndickerman12822 жыл бұрын
Hello Mike , I really enjoy your videos, saw Al at the Long Beach swap told him I saw him and his new Knuckle on your videos, I was hoping to see you out there and say hi in person but was ok just finding some parts for my Pan and will just keep looking for you out there on the road, keep up the good work I learn so much from you and your videos give me confidence while I trudge forward on my project bikes so I will be watching up here in Nor Cal so keep em comin
@pacificmike95012 жыл бұрын
That's great to hear. Thank You. I'll probably make Long Beach next month.
@CaptainFeathersword2 жыл бұрын
Nostalgia is awesome but I am eternally grateful for electric starters after watching this 😁
@pacificmike95012 жыл бұрын
Cool. I had a guy walk up to me when I was about to start my Knucklehead. He said, "You mean you have to kick it?" I said, "No, I GET to kick it. And you don't." I kicked it once, as per the usual, and rode off. It's personal preference. I love them both.
@philly2x2 жыл бұрын
This one made me want to cuss for you lol
@pacificmike95012 жыл бұрын
Nah. It's just stuff.
@jasonouellette8656 Жыл бұрын
Thank you for explaining the whole video thing. I'm not that good on here also. I'm getting back into this and your definitely helping me bring back my memory
@pacificmike9501 Жыл бұрын
That's very cool. Thank You.
@jobuck8932 жыл бұрын
Great video Mike👍
@pacificmike95012 жыл бұрын
Glad you enjoyed it
@markchizmadia20042 жыл бұрын
A very interesting series Mike. Learn a lot from you. I look at that kicker assembly and think how this was imagined, engineered and manufactured without computers. It really is an amazing machine with so many sub assemblies that makeup this bike. Kudos to the workforce of the past and present that make these wonderful machines.
@pacificmike95012 жыл бұрын
Thank You. I look at that stuff exactly the same way. The people that designed and built this stuff were awesome.
@a_aronhdtech13282 жыл бұрын
Love watching at play back speed set to 1.5 hehe between this guy and Tatro they are living Legends.
@pacificmike95012 жыл бұрын
Thank You.
@tasunko76722 жыл бұрын
Oh man!! Helping you work on bikes is hard on my thumbs. ;-)
@pacificmike95012 жыл бұрын
I appreciate though.
@jdcastillocastillo34928 ай бұрын
Thank you Pacific Mike you saved the day again!!!!!!!!!!!! I had my kicker all wrong, so what to do...........look up Pacific Mike and like I said you saved the day!!!
@pacificmike95018 ай бұрын
Wow! That's great!
@Rhysmoreton2 жыл бұрын
Ah I know that fight well getting the clutch arm on. I had to relieve my knuckle one as it would not line up and sit on without me breaking something. Patience is king!
@pacificmike95012 жыл бұрын
Right on
@lbahr112 жыл бұрын
Mike, on some of those release arm’s I’ve taken a file and filed a slight bevel on each side of the four flats of the underside (I hope this makes sense). That way you’ve gotten rid of the burr and they usually slide on. I’ve fought those frign things like you did on this one, until I’m almost in tears. Lol. The life of a vintage Harley mechanic. Not as romantic as some might think.
@pacificmike95012 жыл бұрын
Thank You. And, ain't we lucky to have such neat toys to play with?
@omnivore22202 жыл бұрын
Nice. I like that you didn’t edit out that little wrestling match you had with the kicker cover and clutch arm. Reality isn’t isn’t a 1-2-3, drop together project in one hour minus network commercials, as has so often been depicted on TV.
@pacificmike95012 жыл бұрын
We try to be real, nothing phony.
@BartSondermeijer2 жыл бұрын
Mike this is Art, with a Capital A. Bob Ross comes to mind 😃
@pacificmike95012 жыл бұрын
Thank You.
@charlestomasino91612 жыл бұрын
Boy you sure got patience I would have to take a break lol
@pacificmike95012 жыл бұрын
So take one, take a few deep breaths, then it comes out the same anyway.
@jackhoffmen87412 жыл бұрын
Great series of videos, very interesting
@pacificmike95012 жыл бұрын
Glad you like them!
@leetownsend462 жыл бұрын
Thanks for keeping it real and proving patience is the best tool in the box
@pacificmike95012 жыл бұрын
I think you're right.
@rebel_ltz2 жыл бұрын
Very nice video as always!
@pacificmike95012 жыл бұрын
Thanks again!
@jorgenandersson95212 жыл бұрын
You are the best Mike!!!
@pacificmike95012 жыл бұрын
Thank You.
@andrewsparkman49922 жыл бұрын
Mike your a cool Dude and a badass Motörhead!!!! I use you as my go to guy on all my projects! Thanks for the help!
@pacificmike95012 жыл бұрын
Glad to help. Thank You.
@johnedwards16852 жыл бұрын
Sir, thank you for taking the time and the hard work producing these videos for us. I know very little about early Harleys, they are not part of our culture in England as perhaps Triumphs, Ariels and Nortons are of the same vintage. Seeing you take apart and explain this glorious motor is just great and very much appreciated.
@pacificmike95012 жыл бұрын
Glad you like them!
@yinyanglovebomb Жыл бұрын
Thank you again internet father for the great content🙏
@pacificmike9501 Жыл бұрын
Thank You.
@5FingerRule2 жыл бұрын
Very giving of you to help those of us with moderate wrenching skills, learning from a master mechanic such as yourself. Thank you so much Mike.
@pacificmike95012 жыл бұрын
Thank You. We all start at the beginning. We all continue to learn.
@thinkandrepent31752 жыл бұрын
Mike you give me hope, I fought a galled up flywheel on an Indian dirt bike for a year one time, you make it look easy massaging these parts together.
@pacificmike95012 жыл бұрын
You stick with it 'til you win the battle. Thank You.
@streetwise10-732 жыл бұрын
Mike. just so you know I said a few light weight swear words watching you install that kicker. Just my way of helping....lol Good video...Thanks!
@pacificmike95012 жыл бұрын
I appreciate the "verbal support."
@ChadR132 жыл бұрын
Thank you very much Pacific Mike.. I have common sense and hopefully I will be able to implement that whenever I get, a basket case..
@pacificmike95012 жыл бұрын
You can do it! Just take it slow and savor it.
@ChadR132 жыл бұрын
@@pacificmike9501 absolutely, savor it💯 need to do it on a Budget if that’s even possible😂thanks again ✊🏻Pacific Mike
@joereynolds88082 жыл бұрын
Good job Mike 👍
@pacificmike95012 жыл бұрын
Thank You
@scottkettler69462 жыл бұрын
Like a good surgeon, you keep an old motor running
@pacificmike95012 жыл бұрын
Thank You
@guntherelliot-smith11372 жыл бұрын
ah yes, the sound of the ratchet spanner, what a comforting sound.
@pacificmike95012 жыл бұрын
Yah, I love it too.
@joemarinho18212 жыл бұрын
Your work is Wonderful , Excellent , congratulations, I like so much , thanks Mike
@pacificmike95012 жыл бұрын
Thank You
@pastorbobncc3652 жыл бұрын
Always love stopping by the garage, great series, buy a used bike these are the things you need to do before you put your confidence in it. Have a blessed week my friend.
@pacificmike95012 жыл бұрын
Thank You. You too.
@royalblue20432 жыл бұрын
Mechanical pieces of art eh? Mike, you are one of my favorite go to's on U tube.Thanks so much for sharing with all of us.Worked in a sawmill engineering office when I was a lad. When the engineers where building systems they always would stay in the ASTM tolerances . Specifically, if we installed a manufactured item into the design there was usually a note from the manufacturer stating that there was a thirty percent safety factor built into there product tolerance. ( shear and torque on shafts.That sort of thing.) Just recently purchased a 1995 heritage soft tail with a S&S engine, 102 hp @ the crank motor. avacodo combustion chambers, 485 cam. ( yup! it's an evo). From my calculations she's pretty close to ASTM tolerances from stock.Clutch is after market,have not taken of the primary yet.Lots of torque.Pulls like a train.lol.Cheers Mike and kind regards.
@pacificmike95012 жыл бұрын
I'll bet it's cool. I've never heard of "avocado shaped chambers," but I can see it. I've seen people play with what we used to call "Bathtub Chambers." There's some pretty bright folks out there. "The Horsepower Is Made In The Heads."
@joeriley37212 жыл бұрын
Injoy your video. And work.thanks Mike
@pacificmike95012 жыл бұрын
Glad you enjoyed it. Thank You
@fredsantor9204 Жыл бұрын
Thanks for this video replacing kicker my self forgot your little trick with the rod thx
@pacificmike9501 Жыл бұрын
Glad to help
@codyshope50122 жыл бұрын
Thank you for your videos
@pacificmike95012 жыл бұрын
My pleasure!
@keithblume5159 Жыл бұрын
Excellent video. Definitely need a rawhide persuader vs rubber sometimes.
@pacificmike9501 Жыл бұрын
Always.
@dielauwen2 жыл бұрын
You are such a grandpa. Teaching patience and using rubber hammers. I use a sledge .
@pacificmike95012 жыл бұрын
They've just gotten too heavy for me.
@grezm0nkey2 жыл бұрын
i had a dream about 6-7 weeks back, i was riding a harley and someone came up to me(dreaming) and said "nice bike, what year is it?". in the dream i answered, "just as old as me, 1970" and i woke up soon after. since then i cant kick the idea(that dream), im hell bent on absorbing as much 1970 FL info as i can online. you were one of my first videos watching for info, it was servicing a shovel as a matter of fact, and thank you very much BTW for all your videos. Im a wrench by trade, in aviation. i also ride, but never on or owned a harley. my question, if you will do me the pleasure of amusing. IF...... you were on a soul search for that 1970 FL, solo post seat dream bike, NOW, what would you be looking for? i understand its a very general question that requires a really broad and wide answer filled with countless details involved. i see mostly videos on maintenance/upgrades/installs/etc, (and i can do that). theres no video on, walking up to a "for sale" bike stone cold and eyeballing it, armed with your knowledge and making a buy/no buy call on the spot. its a 50 year old bike, common mechanicals i know, im no novice, its the prone stuff and "sure sign of" that i need............I find MY baby doll, it will be my last bike. help me spot her in the crowd, plz.
@pacificmike95012 жыл бұрын
Post it on your channel and tell me to look at it. I'll know it's not real estate.
@pacificmike95012 жыл бұрын
Somehow, the comments got mixed up. Sorry 'bout that. Sounds like you've got a real spiritual thing happening. Go to motorcycle shops, some will be interesting. Some will not. Look on ebay. Go to a book store. Pick up a couple books on the Harleys that interest you. The bike that's looking for you will find you. Let me know. You're on a quest. Be careful. This stuff is highly addictive and it may change your whole life. Sounds very serious.
@grezm0nkey2 жыл бұрын
@@pacificmike9501 i have been browsing, mostly with intent on pricing and gathering info, taking notice of (what i think a 50 year old bike)will whisper to me about its life, prone cracking areas, rounded hardware from knuckle dragging gorillas tightening hardware to smoke tight and half turn, try notice oil leak stains, rear drop outs mangled, just stuff i know that would be common from regular maintenance. 1970 seems a tough year to locate. i remember reading before AMF, production was low, after AMF it shot thru roof. Im guessing in year 70, production number were low, even though that particular year cases went from generator to alternator, and starter. so goes to say finding a 70 might take time. it's coming mike, i feel it. she out there. i just hope affordable.
@grezm0nkey2 жыл бұрын
@@pacificmike9501 all good mike, thanks for reply and hats off to your channel. dont have to tell you your info helps many, me included, and will be referenced for some time to come. i thank you good sir.
@michaelorr1812 жыл бұрын
The only people that dont make mistakes are the people that dont do anything.....
@pacificmike95012 жыл бұрын
Well said.
@michaelorr1812 жыл бұрын
Mike this is Mike I love your videos, wish I could be soft spoken like you are ,I'm a Donkey 😊..... I could not be as nice as you are ,unless I smoked a fatty and drank a forty 😂
@pacificmike95012 жыл бұрын
Whatever it takes.
@johnbruce32242 жыл бұрын
we love u Mike!!!
@pacificmike95012 жыл бұрын
Backatcha!
@peterpoki95062 жыл бұрын
greetings from Germany Great work
@pacificmike95012 жыл бұрын
Greetings to you and Thank You.
@roberttolley5055 Жыл бұрын
Big Mike the bikes getting together. The carb needed touched up. Ran super last night. Try start let run again. 10 or 15 minutes. Drying oil in cylinders that I put in to keep from locking up while down 5 years
@pacificmike9501 Жыл бұрын
Cool.
@markrotondo92962 жыл бұрын
Mike, love all your vids., I have a 48 pan, I am hoping you will explain replacing the corks at the pushrods, never taken the pushrods out before, would love to watch you do it. Maybe coming soon?
@pacificmike95012 жыл бұрын
Maybe. I've done it on videos for Shovelhead and Knucklehead.
@ytalianu2222 жыл бұрын
Buddy your are ion tiriac twin best tennis player ever. Cheers
@pacificmike95012 жыл бұрын
Thank You.
@58dorsett2 жыл бұрын
I can remember two times when I went in someone's garage, and they had their transmission clamped in a vise, and were wailing on the kicker arm with a mallet trying to get the end cover off cause they weren't aware that the kick pedal has to be depressed to get it off.
@pacificmike95012 жыл бұрын
Oh well...
@joeabbott7839 Жыл бұрын
I am glad you reply on bolts never was really thinking on that I think you like friend I find lot times lot rust an crap aan your never rude I go to the days we put chainin bucket oil for hours before putting them on
@pacificmike9501 Жыл бұрын
Yes! We used to go over to my buddy's house and his mom would come out to the garage with a pan and a hot plate. She'd plug in the hot plate and heat up some grease in that pan and cook your brand new chain in it. She was someone special. She set a speed record in 1936 at Muroc Dry Lake on a 1936 Indian Junior Scout. She was 19 years old and weighed something like 92 lbs. When I met her, she was a sweet old gal.
@michaelmorgan57142 жыл бұрын
Hi Mike I have a 1965 FLH and you might be able to answer a few Questions #1 What oil would you recommend for the transmission # 2. The engine ( I won't be riding it in the winter) The numbers on the left engine case are cast in with a star framing them before and another at the end. I had been told years ago when I had a 1950 FL with numbers stamped in the case that a star framing the numbers indicates that the motor case was cast as a replacement from the factory and the original case had to be sent to the factory as proof of ownership. That friend ( Smiling Fred Casey) sadly passed away over 19 years ago. Love your videos especially the fact that I can hear you on my lap top that has no external speakers. Thanks a head I'll be watching more this winter wile I put an 04 deuce front end on the 65 bobber so I can stop the thing on these crowded Maryland streets.Mike P.S. I bought the bike partially built I would never take an original bike and convert it.
@pacificmike95012 жыл бұрын
That all sounds good to me. Thank You. I believe those stars signify what you're saying. I've heard that before. In transmissions, I use 85/140 in all of them, new old, ancient. Todays technology really works in transmissions.
@pacificmike95012 жыл бұрын
The engine? I use today's 20/50. I don't recommend brands.
@michaelmorgan57142 жыл бұрын
@@pacificmike9501 Fair enough I'll nervously try that 20 w 50 synthetic on the motor next spring when I get her back on the road. I was using a solid 50 but I've replaced the pistons and had the cylinders bored to .004 over. That sounds like a good choice for a long slow break in. If you had not mentioned it I probably would have used a strait 50 w C-D rated oil like I did on my 50 years ago. The more I've been thinking about it the more I like the Idea.
@pacificmike95012 жыл бұрын
Cool. I have no thoughts on whether synthetic is good or not. They tell me it is great. I do think 20/50 is my answer.
@hddm32 жыл бұрын
Wow made it look easy.
@pacificmike95012 жыл бұрын
It's not bad.
@markb31292 жыл бұрын
One piece at a time, and before long it will be running. That carburetor looked a little dirty. ✌
@pacificmike95012 жыл бұрын
Oh, it's way worse than that. But, I'll win.
@mattovictimcycles13342 жыл бұрын
Glad I am not the only one that has that wtf moments on something that should be simple enough....thanks for not sugar coating it....lol...
@pacificmike95012 жыл бұрын
Thank You.
@scottkettler69462 жыл бұрын
I love “not spending hardly any money” on this… pick your vehicle Right now for me it is a 1940 9N Ford tractor as the bikes are all running fine
@pacificmike95012 жыл бұрын
Great project. Good for you. Neat old machine.
@1200742 жыл бұрын
Mike, great videos as usual, just one question how in the hell do you not get grease and oil on your nice shirts ! Grease and oil is attracted to my clothes, lol .
@pacificmike95012 жыл бұрын
I put on a shirt to do videos. I try to make nice. When I'm done, I take my shirt off.
@thomasmiller1364 Жыл бұрын
Hi Mike, I had a case of Harley fever and bought a 2003 FXDL with a S&S Super E carburetor, a performance clutch and an upgraded charging system. Most everything else is pretty much original. The bike has 42,3xx miles on it. I’m in the process of giving it a preseason service and inspection, some things I like, some things I’m scratching my head and wondering how it stayed together … so with that said, I’m going to get busy and see how much fixing I need to do before I feel comfortable taking it out on the road.
@pacificmike9501 Жыл бұрын
It's an important act of "bonding." Enjoy it.
@29687ray2 жыл бұрын
Forgot so much, thanks
@pacificmike95012 жыл бұрын
It comes back to you. Relearning it is easier than learning it the first time. (Sounds good anyway.) Thank You
@au69miner2 жыл бұрын
when you THINK you miss your kick-starter....then realize you're sittin on top of 1800cc's
@pacificmike95012 жыл бұрын
I uderstand.
@alexvallejo-xi1qe Жыл бұрын
Hi brother great show " Hemet Alex
@pacificmike9501 Жыл бұрын
Hello, Alex. Good to hear from you.
@howder19512 жыл бұрын
Nice video Mike, I do miss the kick starter on the newer bikes, there is more feeling of machismo when you start on the first kick, and it just looks cool. Also lets you know when you are getting out of tune. Cheers!
@pacificmike95012 жыл бұрын
Yep. It feels great to kick it to life. Electric starters are nice. I love 'em both.