Step 7-Micro/Win smart connected to PLC S7-200 SMART for configure Analog module EM AM03 and testing

[@raulzepeda4600]

Regards, you can make an example using a profinet peripheral, either a frequency inverter, any type of i/o or festo

[@generaltechnologyknowledge5165]

Ok sir, Let me prepare it. Thanks

[@ankitaa638]

Thank you for the info. Appreciate your efforts.

[@generaltechnologyknowledge5165]

My pleasure!

[@jewelmahmud4894]

Thank you. Please make a video on how to control vfd by s7 200 smart plc

[@generaltechnologyknowledge5165]

Dear sir, We can control it by hardware just connect analog output of PLC to analog input of VFD and get feedback from VFD as analog output then connect to analog input of PLC. One more thing we can control it by Modbus communication. Thanks

[@erdemondul8576]

thanks frends

[@apisitboousang9397]

Make a video, teach you how to install a Siemens s7 200 smart plc writing program.

[@faridullahkhan307]

Which version you are using..I am using CPU s20 when I try to download I cannot

[@generaltechnologyknowledge5165]

Dear sir, Now I'm using version 2.5 for step 7 Micrwin Smart and Hardware of PLC SR20 and SR30

[@samipikko8742]

Are you khmer ?

[@ytube_janri]

i have a problem that the output of this plc to show the current value on the motor is not read in the control room, do you have a solution to help me

[@mushtaqarif1451]

Can you please make a video on analog scaling.

[@generaltechnologyknowledge5165]

Dear sir, That ok I will prepare it. Thanks!

[@ka-eskwelatv6097]

Sir it necessary to update the version from 2.4 to 2.5?

[@generaltechnologyknowledge5165]

Dear sir, No need to update we can use both version2.4 and 2.5 Thanks you

[@ka-eskwelatv6097]

@@generaltechnologyknowledge5165 Thank you very much sir

[@generaltechnologyknowledge5165]

@@ka-eskwelatv6097 You are very welcome!

[@ka-eskwelatv6097]

@@generaltechnologyknowledge5165 Sir Good morning. Why the input indicator not lights on? I load program always on I0.0 for input and O0.0 for output. Only output indicator is on. I have 24vdc inserted to i0.0

[@huydoan1024]

Hi. If I don't know PLC IP Address and seem PLC not use default address. How can I upload program from s7 200 smart. Thanks

[@generaltechnologyknowledge5165]

Yes you can scan the IP address by connect LAN cable from PLC to PC then the software will automatic scan for you after that you can upload the program from PLC.

[@huydoan1024]

@@generaltechnologyknowledge5165 Sir. When I connect Lan cable, software not found PLC. If I know PLC IP address, I can set my PC as same IP class. In my experience, TIA portal can auto scan s7 1200 to find PLC IP but with s7 200 smart, I can not do

[@generaltechnologyknowledge5165]

@@huydoan1024 Dear sir, We can do it the same as TIA Portal. Please try to put your IP4 address of your computer then connect LAN cable to PLC again after that you can try to scan again. I hope you can do it. Thanks

[@eeeknowledgesharingblog8994]

Anybody please share me the link to download the microwin smart software. I need it very badly.

[@generaltechnologyknowledge5165]

Please contact me by fb