Step By Step Condenser installation

[@ADro-automation]

The hvac Ryan Garcia

[@DJV94022]

100 dollar says when ryan garcia knows about this guy..the fame boys will come to him ..hope he stays in the hvac world

[@joeyfinnegan2736]

Ive never been interested in hvac what so ever but watch every one of your videos 😂😂

[@shirwanour144]

To be honest, during my G2 Apprentice I assist my supervising technician with AC unit installation. Good video, keep it up! 👍

[@nebraskaman8247]

Great work! When using a propress If you’ll use a scotch brite pad on your copper after sanding, it will seal much better. Looks to me like you’re a better tech than most, and you’re half the age of a lot of techs.

[@jess8075]

It's so great that you explain everything that you are doing; you have a new subscriber here. Thank you

[@Cresqa]

Couple things I see that bug me 1. Reclaiming with digital gauges 🥴 I promise you in enough time you’re gonna fry those gauges. Get some beater analog gauges for reclaim 2. Unit is basically touching the wall - no bueno 3. Goodman / Carrier unit combo 😂 Other than that you got it running !

[@Fullymetaljacket]

Get a load of this guy

[@Puntodeencuentrosd11]

I agree hopefully customer doesn’t mind I would I mean it’s not gonna affect the system if properly sized but Goodman and carrier two different ball games

[@user-kv1rc1jb2b]

The only ones they use where im from is digital gauges and don't have an issue with them. I would assume they might fry when not used properly hence why you might have a bad relationship with them lol

[@FranciscoHernandez-zc6xt]

Keep making these videos. I’m in school, about to finish in two weeks and this video helped fs. 💯

[@Codystan16]

cant stop watching these

[@haydenpowell1787]

I don’t think dude cared about the drywall dust nice vid

[@FleyBoyGames]

Keep up the videos man. Im lovin it :D

[@jkmarshall3553]

Earthquake straps? Haha... here in FL they're called Hurricane straps. Thanks for all of the commentary on the process! You are doing a great job!!

[@jkmarshall3553]

Do you ever run into problems when using a certain brand for the condenser/compressor and another for the airhandler as I think I saw done with this install (Carrier/Goodman)? Are there issues to look out for?

[@jackquincy6351]

soon you’ll be doing the furnace/evap keep up the good work man

[@Z3L25]

Okay my boy bumping thst thee sacred souls hear you 😤

[@ColdHardMMA]

I was saying it through the phone! "He needs the extra hose!" Done it many times myself and still will many more I'm sure.

[@Codystan16]

idk if you have this but wen your doing attic work you could have a lil light that adjust so you dont have to keeol movin your flashlight idk just an idea in my head

[@Blakethegoat]

I was told to never blow into the end of my hose to get junk out of it, since you you so much moisture in your breath. Instead wipe in on your shirt/use nitrogen

[@ivanr8568]

Hey bro just wondering what that tool is that you used on the copper lines for the condenser 25:09

[@nathanhafer6924]

Did you find it

[@PeoplesChamp760]

Pro press, will set you back a couple grand.

[@prodby8mc]

Love the videos brother. Would you consider doing a breakdown of the financial side of residential? How much the job costed, commission, etc?

[@JaJa-zs8rg]

love watching ur vids bro

[@turny5642]

I leave the whip and disconnect on the system if you’re replacing tht cause u could use the whip to get more leverage to tilt the condenser onto the dolly. Just a helpful tip bro

[@dhillman7522]

I was looking forward to the last soldered joint an the suction side but you skipped it.

[@mohamedomarit5721]

Thanks bro learnt a lot ❤

[@cwrowe]

Cool umbrella…good idea

[@likmyeggs8145]

Goated vid g 🤙🏽

[@tphvac87]

No anti short fitting on disconnect backside?

[@ralphsaldana6190]

On the recovery tank does it matter what side you put the hose on?

[@MaintenanceMan00]

It does not matter no. On recovery tanks the liquid side has a dip tube that goes to the bottom of the bottle. When reclaiming refrigerant it’s said it helps to hook up to vapor side in order to speed up the process.

[@JN19153]

Did he purge those lines before the recovery or am i missing something?

[@WaterMaloneeee]

dang that looks easy. Makes me want to do HVAC instead of Plumbing

[@EwokDoesHVAC]

@@WaterMaloneeee do both

[@WaterMaloneeee]

@@EwokDoesHVAC I plan to do commercial plumbing though for stable hours. But i consider doing both. Still a green in the industry

[@louisharris9352]

@@WaterMaloneeee definitely a good idea. not as much demand for hvac in colder months

[@WaterMaloneeee]

@@louisharris9352 i live in canada so heating is also in demand haha that's an upside on my end if i go hvac

[@nickjcirillo]

Most hvac companies are hvac/plumbing and you would mainly do plumbing in the off season

[@James-su7vq]

What’s the bucket that sits on the van step?

[@tylerwarrick8216]

U should try the field pieace vacuum the cfm 6 or 8 is great!

[@Puntodeencuentrosd11]

Also being in the trade over 19 years I would say also add some floor protection for the customer I didn’t see any any large blankets for your path to the furnace and to the front door

[@kristofer3185]

You should make a discord for people in the trade

[@LUEYYS]

Why not extend the line set to make service easier?

[@Puntodeencuentrosd11]

Exactly lol

[@Nq45-m4k]

You don’t have to purge the hoses before recovery?

[@eduardoescobar5924]

Keep up with the videos g 😎

[@mariogutierrezjr4844]

Nice job bro

[@Thecoolrempna]

I work for a small company in Texas it’s just me and my boss. We do only residential and light comercial. Started working for him in 2019 as a helper when I was 19, started running my own van when I turned 22. So 2 years on my own. Summers up now and my hours are very low. Gonna end up working at a carrier supply house. I was wondering if anyone in the comments know anything about being behind the counter working compared to on the field running service. Any tips anybody?

[@turny5642]

Company i work for has us “pump down” the system 😂 which just sucks into the compressor and close the valves so ic an hold the the refrigerant in there 😅

[@stone5352]

Might get called out for the new condensation line in attic not being copper...

[@EwokDoesHVAC]

@@stone5352 we don’t run copper condensation here

[@TrenchDreamZ]

Why the Goodman AH ?

[@almightyjay730]

My goat.

[@proteen545]

Hahaha i like you guys call them earthquakes straps out west ofc i was taught them as hurricane clips in fl 😂😂

[@dominichughes902]

what’s that milwaukee tool called that made it to where u didn’t have to braise the line sets ?

[@RichInvestorsGroup]

Propress

[@Kydnu]

weird how u only have 3 hose lines on your gauges, usually have four

[@georgiapigs1897]

Why miss matched equipment

[@thekinginthenorth989]

Should of spun the service side of the condenser out to the front, you do service so it should of been a no brainer

[@adrianbermudez1908]

Question why didn’t you just do a pump down on the condenser unit instead doing a recovery ?

[@ToolingWithIZ]

R-22 is expensive and they might re use it 😂

[@adrianbermudez1908]

@@ToolingWithIZ makes sense lol

[@DJV94022]

​@@ToolingWithIZthat sounds about right.and most likely his leader made that call

[@robertofunes1298]

U miss brazing?

[@EwokDoesHVAC]

@@robertofunes1298 I have a lot of fun brazing but pro press just saves time

[@fisforfriendship6093]

Doesn't that depend on what type of jobs ur sent to? How often are condensers replaced like 1 time? He can use pro press on plumbing lines 2

[@HumbleKash]

if you haven't heard surf curse freaks yet you have to listen to it

[@EwokDoesHVAC]

@@HumbleKash I have, disco and freaks are definitely some of my favorites from surf curse

[@bamboo8120]

If you don’t mind me asking bro. How good is this job ? Do you love it? Do you think you’ll retire here one day ? And also do you need school for this ?

[@rsruleu]

How good is any job ? Do you hate it as much as the rest of the things you've done ? Barley anyone retires nowadays/coming out of retirement? You need school .

[@tahoe6182]

Anyone that says I’ma get this new install in real quick and it’s just one person it’s not quick

[@EwokDoesHVAC]

@@tahoe6182 finished the full system instal by 2pm that’s pretty quick if you ask me.

[@eddyvelasquez-toscano4698]

Your supervisor dont get mad when you bend the conduit like that?

[@EwokDoesHVAC]

@@eddyvelasquez-toscano4698 the whip/flex conduit? No

[@kenjaku_]

I thought blue was the vapor and red was the liquid …

[@xercqs]

notii