Baik hang buat sorang....Laju laju nak pi manaa ma ang
@gurutechnetworks Жыл бұрын
I am also a KZbin teacher but I had problem with some ASA configs, after watching this, I am confident. You explained it well man
@ranamitesh50225 жыл бұрын
as a beginner I learnt how to configure asa 5505 firewall. before this vdo i don't know about the how and where we configure.Keep updating and Thanks Triange
@ciscotriangle41565 жыл бұрын
thank u for support
@wahidny7 жыл бұрын
THANK YOU!!! You made it very easy. Sounds perfect. After step 5. I added a note: create access-group (same name as the access-list) which you already stated in the video but didn't add it to the steps' list.
@rei-Ame Жыл бұрын
type cam butuh ada hati nak ajaq org
@muhdzuhairi2957 Жыл бұрын
s7
@atfsiqi9498 Жыл бұрын
betul tu
@LOKESHREDDYSURA7 жыл бұрын
Cant Stop to comment. You have almost justified your title. Really great Video.i did it with you and learnt from it. If you could explain the commands more clearly with what happens when we apply those commands indepth then you are ultimate. Thank a lot for your video and please keep sharing with indepth explanation
@kevinfidler62876 жыл бұрын
Thank you, studying for the 210-260 thank you for getting me started.
@ciscotriangle41566 жыл бұрын
ok thank for support
@matatontainas8 жыл бұрын
Great video. Everything explained with extreme clarity step by step.
@ciscotriangle41568 жыл бұрын
Thank for watching my video
@ShadmanShaikh936 жыл бұрын
Thanks a lot for the useful video. I implemented everything is working perfect and i m able to ping 8.8.8.8 from PC 1 but when i issue command show xlate i see below thing. 0 in use, 0 most used when i issue show nat i can see the hits. any suggestions???
@smthing_likethat2 жыл бұрын
same trouble. Maybe a Packet Tracer bug
@netfenceutbildning2 жыл бұрын
Thanks very educating and also successful in the end. many concepts and useful commands.
@mallik33827 жыл бұрын
This is the Great Video for the beginners, by this can understand easily..
@ciscotriangle41567 жыл бұрын
Thank u for watching my video
@zuperman20027 жыл бұрын
Great how-to. Excellent write up!
@ciscotriangle41567 жыл бұрын
thank u
@srinuvasu95145 жыл бұрын
nice job & very useful for beginners...
@ciscotriangle41565 жыл бұрын
thank u for support
@timmy2132137 жыл бұрын
If I do not have access the the ISP configurations, would I just statically assign routes into the routing table of the ASA?
@ciscotriangle41567 жыл бұрын
yeah sure
@hamidoullahdiaw32727 жыл бұрын
first time i comment on a video just to say thx a lot i learn a lot from this
@ciscotriangle41567 жыл бұрын
thank u for support
@jeanmarcmiessan49407 жыл бұрын
Which version of packet tracer are you using ? the one I have doesn't allow the command nat (inside,ouside). it uses nat (inside,out). Thank you
@ciscotriangle41567 жыл бұрын
6.5
@ujjwalubhale91947 жыл бұрын
awesome video.....but my question is that when i ping from sever to ASA firewall by BPDU packet going to failed but ping as same through command prompt is successful.why not done by BPDU packet.........??????
@ketan18bheda7 жыл бұрын
Its because in access list you need to define bpdu traffic to allow on the outside Interface. Remember, the security level 0 on ASA on outside interface, this simply means that all the packets from higher security level to lower security level will be able to flow but the flow from lower security level to higher level will not. The reason why icmp from server to asa is possible because asa will remember the session which was created by the asa to reach to the server and when the packet is received from the server it just match up the header like port number, ip address, tcs flag etc, which will then allow to reach if everything goes well. This matching process is called Stat-full filtering. State-full filtering will remember the sessions via which it allows outside address to flow from inside.
@jeanmarcmiessan49407 жыл бұрын
Hi, thank you for this video. One important thing you forgot is to enable DHCPD on the ASA to activate the broadcast of ip on the LAN. I really appreciate. that mistake help me to keep digging. thank you again.
@ciscotriangle41567 жыл бұрын
thank u
@omkhard18333 жыл бұрын
Bro well explained but having doubt on ...... 4:20 why "dhcpd dns 8.8.8.8 int inside" .......... as the server is in outside network
@arioncheng30244 жыл бұрын
Thanks you so much for you video
@ronquin52727 жыл бұрын
Thank you very much for your videos!
@ciscotriangle41567 жыл бұрын
ok help share
@GA-tl4iy4 жыл бұрын
THANK YOU, THANK YOU AND GREAT JOB DONE.
@aabirmajumder57785 жыл бұрын
In step 1,you have given ip to VLAN 2.Where you have created VLAN 2?
@alibaltschun23026 жыл бұрын
if i used OSPF 2 and static routing, should DHCP too ?????
@ciscotriangle41566 жыл бұрын
optional
@EngHasanCCIE7 жыл бұрын
REALLY BRILLIANT
@ciscotriangle41567 жыл бұрын
thank u
@yahyaibniliyas5 жыл бұрын
good stuff , detailed explanation enjoyed it thoroughly, anyone can follow. thank you
@พี่หลวงคนเดิม-ษ1ง4 жыл бұрын
Nice
@kanigollapremmanikantagupt53095 жыл бұрын
thanks a lot
@ciscotriangle41565 жыл бұрын
Please help share
@californiasportfishing7 жыл бұрын
Do you have more ACL videos? You're awesome!
@ciscotriangle41567 жыл бұрын
ok i try to create new acl
@californiasportfishing7 жыл бұрын
Cisco Triangle thanks!!
@10trillionusdt366 жыл бұрын
Thanks for the video
@ciscotriangle41565 жыл бұрын
please help support one more for my channel : cisco khmer learning
@10trillionusdt365 жыл бұрын
@@ciscotriangle4156 will do!
@ramkumarnatarajan91427 жыл бұрын
Is there any configuration for the in between Switch? The Pcs are not getting IP from DHCP.
@ciscotriangle41567 жыл бұрын
you can try testing do it by urself and try to search from internet
@jeanmarcmiessan49407 жыл бұрын
DHCP doesent work because it is not enable inside the LAN. Go on config mode on the ASA and type in "DHCPD enable inside". and to make sure that it works go on the desktop and turn on DHCP and you will see DHCP propagate within 5 seconds.
@user-hu4hx6bm6m6 жыл бұрын
WONDERFULL
@shivajikr59305 жыл бұрын
Nice Video.
@ciscotriangle41565 жыл бұрын
thank u for support
@yahyaibniliyas7 жыл бұрын
great video with few unclear moments, i.e server ip configuration is not mentioned.
@ciscotriangle41567 жыл бұрын
in this LAB we not mention about Server Because in the Real Work We configure only on Cisco ASA, for real work you can watching this video : kzbin.info/www/bejne/rYqXgJSoqaZ_l7M
@samathsot7 жыл бұрын
ASA in my packet is Verison 8.3, how can i get version 9 in packet Tracert ?
@ciscotriangle41567 жыл бұрын
i think that base on Cisco Packet Tracer also.
@vicrod747 жыл бұрын
thank you for the video, very useful. :)
@ciscotriangle41567 жыл бұрын
Thank u for support
@EdgarStgo7 жыл бұрын
Thank you so much
@ciscotriangle41567 жыл бұрын
you are welcome
@adityarajrv6 жыл бұрын
Good Job......
@ciscotriangle41566 жыл бұрын
Thank u
@TechSupp9476 жыл бұрын
For some reason, I have the same exact configurations before this with the NAT and ACL, but I cant get my PC on the inside(ASA) network to ping anything on the outside? I've set the access-group to the outside interface and even have the inspect ICMP stuff in the policy map. Can someone answer what I'm missing?
@ciscotriangle41565 жыл бұрын
please help support one more for my channel : cisco khmer learning please Question in my fb page : Khmer Cisco Group
@davidpr237 жыл бұрын
Thank yoy for the video, you are awesome, but I have a error in the min 6:46 it say Error Invalid HostName after configure the router outside, Can you help me? Thank you again.
@ciscotriangle41567 жыл бұрын
make sure u are follow my configuration.
@krish78387 жыл бұрын
good video ..!!!
@ciscotriangle41567 жыл бұрын
thank u
@lengveasna6 жыл бұрын
Good videos
@ciscotriangle41566 жыл бұрын
Thank u
@ratnavodutta7 жыл бұрын
I liked your video!!!! :)
@ciscotriangle41567 жыл бұрын
thank u for support
@kamalDT7 жыл бұрын
Thanks, you save my life :D
@ciscotriangle41567 жыл бұрын
thank u for support
@ItzGrudge6 жыл бұрын
I used RIPV2 on my ISP to connect another LAN with a VPN and frame relay and now I cant ping from PC's to google.com? Help
@kasmot0247 жыл бұрын
good job bro
@ciscotriangle41567 жыл бұрын
has real lab about this video in this channel also
@paladarlz8 жыл бұрын
good :) basic class
@ciscotriangle41568 жыл бұрын
yeah for beginner
@francogilson51293 жыл бұрын
Thank You so Much It's very useful for to gain knowledge .. Much Love and God Bless
@DragonKeeper-sl5bc9 ай бұрын
What is the password for asa after setting security
@jazzfun20937 жыл бұрын
Do u have facebook or whatapp I got some problem ... Or email ?
@ciscotriangle41567 жыл бұрын
u can go to my page on facebook : khmer cisco learning facebook.com/kciscokhmer/
@goodgirl6247 жыл бұрын
Have problem DHCP failed. APIPA is being used.
@ciscotriangle41567 жыл бұрын
not clear about your question
@TheHunting207 жыл бұрын
Make sure not to mix up the inside with the outside ...in his video the inside is the interface e0/1 and the outside is interface e0/0 at 0:11 it might be different in your network.
@ciscotriangle41567 жыл бұрын
ok thank u
@jeanmarcmiessan49407 жыл бұрын
DHCP doesent work because it is not enable inside the LAN. Go on config mode on the ASA and type in "DHCPD enable inside". and to make sure that it works go on the desktop and turn on DHCP and you will see DHCP propagate within 5 seconds.
@kawaiikuroneko6008 Жыл бұрын
Thank you for this helpful video ❤️
@rse1653 Жыл бұрын
Odo laju sial
@vinmouns49464 жыл бұрын
Hi to all, anybody have a lab in .pkt for me please ? i need a VPN remote access Lab, thanxxxxx at all
@bggaming21462 жыл бұрын
lmao last time i used this video it worked and now it dosent idk what i did wrong :(