The Resin Secret to Perfect Projects

  Рет қаралды 54,656

Steve McDonald Arts and Crafts

Steve McDonald Arts and Crafts

Күн бұрын

Пікірлер: 91
@ashleytarver2436
@ashleytarver2436 Жыл бұрын
I'm a beginner and learning SO much every day! My worst mistake so far? Starting a business before I perfected technique. I'm selling items, but it's taking me a few tries to get it right. But videos like THIS are making it very clear the areas I need to change and work on to make my work look more professional. Thank you so much for making videos some ppl would think was insignificant. But it LITERALLY just saved my business!! Thank you SO much!!!
@angierox6964
@angierox6964 Жыл бұрын
Thank you! I’m learning so much from you and I really enjoy listening to you ☀️
@christinaperson1168
@christinaperson1168 Жыл бұрын
I appreciate your tips, tests and all suggestions! You make us better by sharing your knowledge! Thank you Steve 😊!!!
@meghanbrown7269
@meghanbrown7269 Жыл бұрын
I'm new to resin and I loooove it but didn't know there was a deep pour kind. I've been watching your videos for about 2 hours now. I've learned so much!!!! Thank you!!!!!
@LisaVornhagen
@LisaVornhagen Жыл бұрын
I love when you do videos like this. I find them very helpful. Thanks!
@faieriemama64
@faieriemama64 Жыл бұрын
We put our 1 to 1 JDiction resin container in warm water for just a bit and it gets rid of most of the bubbles. Then we put it in the molds and flame or pop the few bubbles do show up.
@barbarameriton4818
@barbarameriton4818 Жыл бұрын
Thanks for showing this Steve & for your advice on FB. That’s why being a member is so very helpful. If I’m not sure which to use I can always ask. As you know 😊
@sweetolie1
@sweetolie1 Жыл бұрын
Thanks Steve! You rock, just like this video!
@rachaelwhite5806
@rachaelwhite5806 24 күн бұрын
Beginner, appreciate the advice!
@lindaeastment4542
@lindaeastment4542 Жыл бұрын
Hi Steve, Super duper tips thanks 👍 looking at the 2 end Results I thought the plain one came out quite cloudy looking & the other one was nice & clear ❤️👍
@sci-fi.tsunami
@sci-fi.tsunami 10 ай бұрын
2:26 Always try to get 1:1 mix ratio. Keep it as easy as possible.
@annagray6491
@annagray6491 Жыл бұрын
Amazing! You can see the difference immediately! Thanks for sharing this with us.
@NinaHansen2008
@NinaHansen2008 5 ай бұрын
Thank you, Dr. Mc.
@SashasRevenge
@SashasRevenge Жыл бұрын
The faceted one is so crystal clear, I love how it turned out! Love your channel!
@DianasYTChannel
@DianasYTChannel Жыл бұрын
Thanks again, Steve. You always give the best advice. 😄
@williamharris5519
@williamharris5519 2 ай бұрын
Thanks, this kind of stuff is really useful
@jayneyhoulihana
@jayneyhoulihana Жыл бұрын
Thank you for this video, I've now got better knowledge and understanding 😊
@mandicoleman7433
@mandicoleman7433 Жыл бұрын
Luv the faceted 1 looks like a huge crystal
@DrewMedina
@DrewMedina 10 ай бұрын
Thank you for the resin mixer recommendation! I ordered this one and it’s great. I was worried it would be too fast but it went nice and slow once started in the resin. Using thick 300ml slowed it down too much so I switched to the second speed. Perfect! Thanks again!
@ComfortablyLost2020
@ComfortablyLost2020 Жыл бұрын
Oh that's awesome, thank you so much sir! I honestly didn't know this, this is remarkable and it truly explains a lot, I was wondering why I kept getting so many bubbles
@denisemangum9274
@denisemangum9274 Жыл бұрын
I like the bubbles in the one
@Leena79
@Leena79 Жыл бұрын
I just got a sphere mold recently, and I need to order some resin soon, so this video was timed perfectly! Am I correct to assume, if I cast in multiple pours and cure the layers in between, flash curing won't be an issue? Also, I really like the bubble effect of the JDiction sphere, but I'm not gonna risk ruining my molds by trying to use it, but is there a way to intentionally get that effect? If I really mix the deep pour vigorously?
@seliagamble8808
@seliagamble8808 Жыл бұрын
Thanks!
@giselleacryliccreations3359
@giselleacryliccreations3359 Жыл бұрын
Thank you🇨🇦🦤✌
@biancabarbaro801
@biancabarbaro801 Жыл бұрын
Anyone on the fence about joining the channel as a paid member to get access to the member's only facebook group, definitely well worth every penny! My favorite group - drama free, super helpful and lots of fun and hijinks. Take the plunge!
@josietiffney6466
@josietiffney6466 Жыл бұрын
Hi I'm a beginner got everything I need but I have no idea how to store what ever I've made (havent made anything yet) whilst it cures I've watched your videos and love them thank you
@mariverhagen8082
@mariverhagen8082 Жыл бұрын
Thanks
@marilynhansen7881
@marilynhansen7881 Жыл бұрын
Thank you for sharing this because I was wondering myself. I do have a question though. Does it make a difference when adding micro powder or items like dried flowers? That faceted one is gorgeous , especially with the light! I looked at your link & it was for the smooth one. Can you put the link for that faceted one please? Love watching your videos . Hope you have a great day. Thank you for sharing your creativity!! ❤
@marilynhansen7881
@marilynhansen7881 Жыл бұрын
@@SteveMcDonaldArtsandCrafts Thank you so much! 🤗🙂
@karenmclaughlan9128
@karenmclaughlan9128 Жыл бұрын
I dont use deep pour resin for my deeper moulds and they turn out great!
@ruthbrown-eubanks9093
@ruthbrown-eubanks9093 Жыл бұрын
Thank you!
@leesescraftycreations6719
@leesescraftycreations6719 Жыл бұрын
What’s it like the other way. Using a deep pour for smaller projects.
@rebeccaampuero2347
@rebeccaampuero2347 4 ай бұрын
Can you use a deep resin for a shallow pour?
@redbootsproductions3577
@redbootsproductions3577 Жыл бұрын
If I do a cylinder pour, with multiple pours to add color or items to it, does it leave visible demarcation lines in the finished product?
@albertmcguinness2078
@albertmcguinness2078 11 ай бұрын
Hi Steve, can you use a silicone mould in a pressure pot without it distorting, and if so what do you set the pressure level at in the pot and for how long thanks
@glitchthegothbot970
@glitchthegothbot970 3 ай бұрын
I got resin in the mail earlier the 1 thing I made cured fine the the rest of then never cured at all but I wad sure to do exact measurements how does that work & how do I clean that mess out
@becky6997
@becky6997 Ай бұрын
I only right now have a 1:1 resin I'm attempting to make a Kirby nightlight for Christmas. Because I'm adding a resin figure I made to it. Is this best to do in layers?
@gustavotobon7042
@gustavotobon7042 Жыл бұрын
Hi Steve, I love these but I want the faceted one. Do you have ths link to that one. Thank you as always.
@TheCyrussmith
@TheCyrussmith 11 ай бұрын
Thank you so much 👍 this as helped me so much 😁😄😁🫡
@MsGIna3
@MsGIna3 Жыл бұрын
Hi Steve. I’ve just bought the Let’s Resin Casting and Coating resin to make egg for the Dragon in the egg mold for my grandson. Do you think it will be ok? Thank you x
@Coyo-Tea
@Coyo-Tea Жыл бұрын
I just LOVE that faceted mould Steve where is it from as it would make awesome finials for my banister posts
@gadgetgirl7336
@gadgetgirl7336 Жыл бұрын
Hay there can mustered seeds be put in Resin
@leeiaprice7386
@leeiaprice7386 9 ай бұрын
With deep pour can you pour it all in one go? I have a large heart that I want to put flowers in, it’s about 4inches deep, or should I do layers? Thank you xx
@martineakins9794
@martineakins9794 Жыл бұрын
Hi, could i pour a 15 cm mould with deep pour resin i one pour?😊
@cindybrannon234
@cindybrannon234 Жыл бұрын
Steve I’m pretty new to the resin game and I love the video you just done. I have 2 silicone molds that one is square and then on is round but these are hollow in the middle so you can put stuff in them. My question is do I need to use deep pour resin on those or can I use my jdiction regular resin? I just found your channel a couple of months ago. I have been binge watching your videos. I’m fascinated at the different projects you do and they come out so amazing. Thanks again. Be safe, love your best life and God Bless.
@miniscenesgb
@miniscenesgb Жыл бұрын
Thanks Steve. I'm working on testing with and without heat under them too as that makes them less viscous on shallow pours but the heat on deeper pours... interesting to see these reactions. Strangely the bubbles look good when you put that light underneath
@shirleyandersen4724
@shirleyandersen4724 6 ай бұрын
can you do a video on textured art.?🙋‍♀
@georginasalazar1204
@georginasalazar1204 Жыл бұрын
I love your videos. So informative. I do have a question. I’m making some small animals and different type of stuff for outside to put in my garden. What is best resin to use for outside😳
@JADEDthoughts96
@JADEDthoughts96 Жыл бұрын
Waaaaa !! I thought it was meant for it because of how quick it cured?!
@teresaredmiles1964
@teresaredmiles1964 Жыл бұрын
About how big should a mold be to use the deep pour resin
@libbyannbest1723
@libbyannbest1723 Жыл бұрын
What happens if you use deep pour resin in molds inside the curing machine???
@lyndaparks7378
@lyndaparks7378 Жыл бұрын
What is the best resin for flowers? I’m doing ring holders and 4” and 5” cubes.
@monicafolsom7439
@monicafolsom7439 Жыл бұрын
Could you use deep pour resin on small items or shallow items and get a good result?
@lindseygarland9299
@lindseygarland9299 Жыл бұрын
I am new to resin and have not been able to find any videos about long narrow resin projects. I am interested in recreating vintage inspired lucite non-burn candlesticks. I realize I will need to make my own silicone mold, but what tips can you give for which resin to use and preventing bubbles for long and narrow resin pours? The candles are anywhere from 8”-12” and a diameter similar to that of a dime (coin). Thank you for any information you (or anyone here) can provide. Thank you.
@gigigrace92
@gigigrace92 7 ай бұрын
How to fix resin that didnt harden or projrcts that have sticky parts
@Ali-H3444
@Ali-H3444 Жыл бұрын
I'm just curious why you don't use the jdiction deep pour?
@meh_lady
@meh_lady Жыл бұрын
Teexpert is usually cheaper for deep pour and it is decent resin. On that vein, one Teexpert product I DON’T recommend is the 4 hour cure. It doesn’t cure in anywhere near 4 hours and it pulled the color out of my foil flakes causing my project to be tinted with it. Never had that happen with any other resin. JDiction 4 hour is great!
@Ali-H3444
@Ali-H3444 Жыл бұрын
@@meh_lady thank you so much for this information. I really appreciate it.
@libbyannbest1723
@libbyannbest1723 Жыл бұрын
​@@meh_ladyHave you ever used teexpert on a resin mat or inside a curing machine?
@meh_lady
@meh_lady Жыл бұрын
@@libbyannbest1723 Trying to remember, I have so many different resins! I have only used their regular resin from a free 8oz sample but it was a long time ago. Fast cure was for sure in a pressure pot with warming mat underneath it. Deep pour was at room temp as I don’t put heat to that since it kind of defeats the purpose. These are all referencing Teexpert products I’ve tried.
@melissaguthrie1254
@melissaguthrie1254 Жыл бұрын
Is it okay to use deep por resin in smaller molds also, I understand it will extend the curing time, I was just wondering if it was okay to do.
@laurawilliams4005
@laurawilliams4005 Жыл бұрын
Yes, you can. You have to bear in mind that any additives will sink, as the resin is more runny. I use it to make Christmas trees. The mica powder sinks, giving them a nice silvery sheen. It's also good if embedding complex shapes in resin, as you get fewer bubbles sticking to the edges of the object. Takes about 3 days to cure though.
@libbyannbest1723
@libbyannbest1723 Жыл бұрын
​@@laurawilliams4005Have you ever used deep pour resin on a resin mat or inside a curing machine?
@evablack4834
@evablack4834 Жыл бұрын
Feedback please: I just got a few xl trinket jars with lid- about 4 inches tall but about a cm thick for the exterior walls of the dish. Will 1-1 resin flash cure? My deep pour is back ordered till mid April.The center is hollow but the shapes throwing me off..
@TTV_tscottfan3573
@TTV_tscottfan3573 Жыл бұрын
Hi! I'm new at resin and started making bookmarks. I have run into a problem where after curing for 2 days, sometimes they are bendy. I have double checked all the possible issues: temperature, mixing ratio, ratio of colorant to epoxy and I cannot figure out why this happens!!!!! Ideas??
@teedee478
@teedee478 Жыл бұрын
True resins usually work the same. The problem I think is in the cosmetic effect of the resins that differs..ie. yellowing, and sometimes I find it harder to remove bubbles.
@lisaforbes7325
@lisaforbes7325 Жыл бұрын
What do you mean by true resins?
@teedee478
@teedee478 Жыл бұрын
@@lisaforbes7325 I just missed the comma. True, resins...
@evablack4834
@evablack4834 Жыл бұрын
Thanks you for doing this experiment, I’ve wondered but I’m too chicken to pour the 1-1 in sphere molds for fear I’ll ruin the mold- tried 1-1 in stages and got a very clear yet striped sphere😂
@kandacehead9544
@kandacehead9544 Жыл бұрын
Amazing Deep Pour resin by Alumilite is the best! You won’t need to pour in layers.
@LowVisionUKTerrysView
@LowVisionUKTerrysView Жыл бұрын
Hi Steve. Great Video, as always my love. the faceted sphere is awesome, I have tried to order it , but can only see the smooth one, unless my screen reader isnt telling me? Also, I tried to order the tee expert deep pour, but cant find it for the UK..am I just being dim? lol x
@laurismith1087
@laurismith1087 Жыл бұрын
Steve, thanks so much for all these teaching moments. Do you consider something this size but maybe a vase or tea light candle holder to be considered a deep pour even though the walls are thin? Thank you.
@fairyspunfibers9098
@fairyspunfibers9098 Жыл бұрын
@lauri Smith No, if the walls are quite thin (about 1/4"-3/8" all the way around, MAXIMUM), a 1:1 ratio should do fine. If you have ½" walls, you're probably asking for trouble, especially in cheap molds sold everywhere. Not so much trouble at ½" in the expensive (& very well-worth it!), heavy molds, such as those made by Julie Cutts from Pouring Your Heart Out. *HOWEVER!* Any flash curing can not only destroy your mold (& cause a fire!), it can also dull the mold surface so that it's never as shiny as it was. No need to ask me how I found these things out... Anything *above* 1/2" to _no more than_ a 2" depth should be a deep pour resin, usually with 2:1 ratio. Anything above 2" needs a 3:1 ratio resin to prevent flash curing.
@lisaforbes7325
@lisaforbes7325 Жыл бұрын
Where are these resin forums?
@resin-art-and-3d-printing
@resin-art-and-3d-printing Жыл бұрын
On the JDiction 1:1 resin would it stil do the same if you do it in layers rather than just pouring the whole lot in at once ?
@nickylynn87
@nickylynn87 Жыл бұрын
You would see lines between each pour, I've done many times. Unless you can catch it when it's just about to cure to pour the next one
@donnayount2094
@donnayount2094 Жыл бұрын
Hi Steve, I have a question I am believing in you to know a answer for me, I wanted to make a mold of a little bunny, only thing is, the bunny is a wax candle, would the heat from the mold mix melt my bunny? I truly trust your work and word. Thank you, your the best.
@teedee478
@teedee478 Жыл бұрын
I use to think I didn't need deep pour on things this size. And I was always disappointed in the results.
@ClassicCarLady
@ClassicCarLady Жыл бұрын
I need to ask you a resin question. I use a good brand when I cure my projects and it’s the best one I found out there. But what I’m trying to ask is what does it mean when you make something with resin and part of the project cures and some of them don’t it’s like still go away and sticky. Does that mean I put the wrong mixture together or I didn’t pour enough in the mold. Because that type that doesn’t really measure my resin when I poured in my projects, I do like a little bit of this a little bit of that. If you can answer back when you get a free chance, that be great from a fellow Crafter’s.
@meh_lady
@meh_lady Жыл бұрын
It can also be flat-out dangerous for resin to flash cure!
@kandacehead9544
@kandacehead9544 Жыл бұрын
I once made a globe that was meant to look like a goldfish swimming horizontally in a bowl. I used a fake fish and some artificial seaweed made of soft, bendy plastic. The resin I used was Liquid Cast, which was a 1:1 ratio meant for deep pours. Like the resin you used for the non-faceted sphere, it heated up quickly and warped the seaweed, which also affected the placement of the goldfish. When it started heating up/warping, I went into a panic and proceeded to put in the seashells, hoping that would solve the problem. Though the piece didn’t turn out the way I intended, it still looked pretty nice and made for a cool lamp, so it wasn’t a total loss. I since discovered Amazing Deep Pour resin by Alumilite, which is a 2:1 ratio that produces clear, bubble-free castings even without a pressure pot or vacuum chamber. Though it takes much longer to set (1-2 days), Amazing Deep Pour is now my go-to resin, and I’ll never use Liquid Cast again. It’s a bummer I didn’t know about it before making my goldfish globe. Live and learn, or die and burn. 😊
@theresawilkins492
@theresawilkins492 Жыл бұрын
I want that mold that's crystal prisons
@viktoriialiubymenko7516
@viktoriialiubymenko7516 Жыл бұрын
I have 5-five resin from Italy, but I still get bubbles inside. A lot of small-small bubbles. I started to think it’s because of the high humidity 55%. Other masters use the same resin successfully.
@lisaforbes7325
@lisaforbes7325 Жыл бұрын
The deep pour was a lot more shiny
@maeve4385
@maeve4385 Жыл бұрын
@bellaannecgoff2335
@bellaannecgoff2335 Жыл бұрын
❤❤❤
@Sylvia-Storm
@Sylvia-Storm 9 ай бұрын
How deep is deep?
@ilsabailey8195
@ilsabailey8195 Жыл бұрын
What are you saying Steve, it's not the resin it's me? LOL
@lisaforbes7325
@lisaforbes7325 Жыл бұрын
That's what I heard
@sci-fi.tsunami
@sci-fi.tsunami 10 ай бұрын
The resin ain't the problem. *FINDING THE RIGHT RESIN* is the problem. Most resins don't have adequate demonstration videos to go with them. Or they don't post the technical data like viscosity or shore hardness. So it's lots of trial & error & wasted money. More failures than successes. Everything has to be perfect. The temperature of the resin, the temperature of the room, the moisture level of the room, the size of the mold you're trying to pour into etc. Believe me, I know! I've been at it for decades & I still can't find the perfect resins. I'm settling with "close enough". And then you have the problem of shelf life. You need to use it as fast as possible before it goes bad. But if you don't have anything to do at the moment it will start crystalizing. I've bought resins & mold rubber from stores like Michaels & Hobby Lobby that were sitting there too long & were no good. Nobody tells you this stuff. I had to learn it all the hard way. And it's almost impossible to find a KZbin video that addresses your specific needs. Every time I try to find a video about clear resins to use for tiny toy parts, all I can find are videos about huge wood turning or tabletop projects. If you want to get into this it has a very high frustration level & a steep learning curve. Lots of experimenting & lots of failures (depending on the type of project).
@DeadlyDave6014
@DeadlyDave6014 Жыл бұрын
Don’t be like maybe it’s the problem with what you’re using it for, just say it’s a skill issue
I Can't Keep Up With The Demand For This DIY Project
14:17
Steve McDonald Arts and Crafts
Рет қаралды 41 М.
STOP Making These 5 Epoxy Resin Mistakes Right Now
13:26
Steve McDonald Arts and Crafts
Рет қаралды 60 М.
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
This Silicone Mold Trick Will Break Your Brain…
15:16
Steve McDonald Arts and Crafts
Рет қаралды 11 М.
Astonishing New Resin Technique I Discovered By Accident!
8:01
Steve McDonald Arts and Crafts
Рет қаралды 61 М.
If This Works It Will Be A Game Changer for Crafters
7:20
Steve McDonald Arts and Crafts
Рет қаралды 30 М.
You'd Be Crazy To Miss These Brilliant Resin Tips and Tricks
13:12
Steve McDonald Arts and Crafts
Рет қаралды 48 М.
306. This Resin Art WATER SPLASH Looks SO REAL!
25:12
Daniel Cooper
Рет қаралды 50 М.
I Broke ALL the Rules - Putting Epoxy Resin to the Test
15:15
BM Sculptures
Рет қаралды 1,4 МЛН
Why I Regret Buying Mica Powder Pens for Resin!
5:49
Steve McDonald Arts and Crafts
Рет қаралды 13 М.
#185. The Resin WORLD IS YOUR OYSTER! An Epic DISCOVERY!
23:40
Daniel Cooper
Рет қаралды 207 М.