⚡Full Brawler Install! Protect Your Harley!⚡

GET YOURS HERE - www.burlybrand.com/product/15...
Tools Used In This Video
Line Pinch Clamp - amzn.to/4cD9ZVB
FT LB TORQUE amzn.to/49VCPOy
INCH LB TORQUE amzn.to/49P6Q3j
MILWAUKEE M12 RATCHET amzn.to/3TfO5zU
M12 BATTERY amzn.to/49BXrvG
M12 CHARGER amzn.to/3V5O0jT
MASTER HEX/ALAN KIT amzn.to/3wDKAKX
ALTERNATIVE KIT amzn.to/48zdEQV
RATCHETING WRENCHES amzn.to/49UQuFL
MEDIUM LOCTITE amzn.to/3Im06xI
XL MOTORCYCLE LIFT amzn.to/3IhXgd1
In today's video, I'll walk you through the step-by-step installation of the Burly Brand Brawler Engine Guard and Saddlebag Guards. These bad boys are not just accessories - they're super tough, providing unparalleled durability to keep your ride looking sharp and protected on the road.
‪@BurlyBrand96‬
Steve's Favorite Motorcycle Must-Have Tools!
Hexagon LED Ceiling Lighting - amzn.to/48rwtp7
Master Hex/Torx Set - www.amazon.com/dp/B083Q5WZHS?...
Swivel Head Ratchet - amzn.to/3MYeMEw
Milwaukee M12 Ratchet - amzn.to/3VSR6W4
M12 Battery - amzn.to/3gweokl
M12 Charger - amzn.to/3Srrb53
Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
Blue Medium Loctite (Your Bike's Best Friend) - amzn.to/3gwdK6p
FT LB Torque - amzn.to/3VON5SH
IN LB Torque - amzn.to/3F4wCUA
Vise Grip Plier Set - amzn.to/3TYZUs0
Motorcycle Funnel Set - amzn.to/3sP9HFz
Belt Tension Gauge - amzn.to/3FiiXco
Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
As an Amazon Associate, I earn a very small commission from qualifying purchases. The best part is it doesn't cost you anything extra! Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music is Licensed Through www.epidemicsound.com
VIDEO DISCLAIMER:
This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch.

[@sikbaggers]

🤘 Thank you all for tuning in to check out the Burly Brand Brawler Kit installation video! Your support means the world, and I hope this guide helps you effortlessly upgrade your ride. If you have any questions or thoughts, drop them in the comments below - I love hearing from you. Ride safe, and catch you on the next adventure! ✨ #BikerFam #BurlyBrand"

[@u.s.aarchangelforgod3679]

TY sir

[@Jedi_Obi-Wan]

Steve, Thanks for another awesome install video and product highlight. You by FAR produce the most comprehensive install videos on YT. Believe me when I say I have watched thousands of videos and yours are the most detailed and informative. Thanks again.

[@sikbaggers]

Thank you very much for the compliment Tony...thats what I strive for and its great to hear the extra time I take on the videos pays off and helps! Much appreciated sir.

[@stephensheridan7318]

I really like your videos. Nicely done!

[@sikbaggers]

thank you Stephen!

[@MaxStreetGlide2023]

Steve the intro was hilarious The guards look nice.ill have to check out there site.Thanks for the video

[@sikbaggers]

it was certainly frustrating lol I did that intro about 30 times haha yeah they are pretty cool looking..these went on a buddies bike but im looking into this tyle for our own build now

[@GlidingThroughLife]

Have those on my bags for my 2012 road glide custom. Hopefully I never lay it down to save the bags. But they looks awesome also!! Thanks for another informative video! 🤘🤘

[@sikbaggers]

yes its one of those things we hope we never need to use but glad they are there if we do ...thanks for checking it out!

[@ChrisCollins001]

Congrats on 100K!! You deserve it!!! Love your content!!

[@sikbaggers]

Much appreciated Chris! I know I replied to the other one but thank you again!

[@anthonybrincefield2812]

Very good video, step by step instruction, just how it should be done. Styling isn’t for me but look very well made.

[@sikbaggers]

yes sir they are definitely for a certain style bike and thank you for checking it out....much appreciated Anthony!

[@BurlyBrand96]

Thanks for the love! Great installation and product review video. #KEEPITCUSTOM

[@sikbaggers]

You're very welcome...the brawler kit is awesome!

[@rodneyhanbaum697]

Thanks Steve! been looking at this design since i picked up my RG! Appreciate you. Happy Easter Brother

[@sikbaggers]

Hey bro! I had a comment earlier that said they were sold out.. same thing happened on the last engine guard from factory 47...but these have a may 1 date for back order...I wanted to get a set for my RG ST but looks like ill be waiting lol

[@ryanm8456]

Did you have to pull the back bolts and redo them. it looked like you put them in backwards. The only reason I ask is I have don’t it twice. Another great video. I will be checking these out.

[@sikbaggers]

it doesnt matter which way the bolts go...im just used to flipping them for air ride systems ..usually you have a fender extension back there that covers them up, this one however does not so the next time its in here I might swap them, but as far as what its doing...holding the bracket, the bolt can go either way and it does the same job lol

[@JohnM-ee6kj]

Looks sick. Good Vid man, Keep it up!

[@sikbaggers]

Thank you john...much appreciated!

[@whatyoumakeofit6635]

I wish someone would make a bar like this that would work with lowers on.

[@sikbaggers]

yeah that would be cool

[@joeyhackney3017]

Looks like my Santoro Fabworx bars. They, will probably ad some spinners to their lineup as well.

[@sikbaggers]

a lot of the bars like this look similar ..there isnt much you can do with them...I like how these have added webbing at the weld points..to me it just beefs them up even more.

[@CraigAquilina-fw3nn]

Great Intro love your channel keep up the great work

[@sikbaggers]

Thank you Craig!!

[@aaronledbetter7429]

I just ordered everything to do this to my 19 RG. One thing I didn't think of is the oil cooler fan (that mounts to the back of the oil cooler)... Does anyone know if this Brawler kit will interfere with the oil cooler fan. (Hopefully not being I already ordered everything! lol)

[@ericnay7733]

Don’t forget, if you’ve got the regular stock crash bar (not the chopped one) you’ll have to buy a fairing support bracket as well.

[@sikbaggers]

13 and older needs a fairing supprt bracket, 14 and newer does not need it. Thousands of people running dropped Road Glide fairings which cannot run any support brackets, and running them with no issues. The way the fairing mounts to that frame its not going anywhere...Please see my latest video on Fairing Relocation Brackets and I address fariign support brackets. kzbin.info/www/bejne/Z6PGqpePYpKNe9Esi=tJkLhtFuEhCaHm5t&t=79

[@ericnay7733]

Right on man, my mistake.

[@u.s.aarchangelforgod3679]

TY Steve solid

[@sikbaggers]

Thank you Sir! Hope all is well and you had a good Easter!

[@SIERRA-dx9wm]

Front one looks like a stubby 50 BMG barrel 😎 Shiny side up

[@sikbaggers]

hahha yeah they are thick!

[@charlesboard5741]

Nice product, any real reason that you reversed the bolts and nuts on the rear saddle bag support arm? The nuts are usually inside not facing outside. Just asking thanks

[@sikbaggers]

no reason at all...im so used to installing air ride and we flip those to make it easier to take off with air tanks and compressors that its just habit now but no, no reason..they can go either way

[@HarleyTig]

love It Very Nice 😎✌

[@sikbaggers]

thank you Tig! Much appreciated!

[@DeadRoman]

The rear bars are kind of funky looking. Why didnt they keep a close profile to the bag up top like santoro and imzz?

[@sikbaggers]

they stick out the same distance as the not yo daddys by santoro ..the bars end neat eh edge and the sliders stick out further..maybe it was just my camera angle or something.

[@nickbeetham3654]

'23 RGST here. Great video, thank you. So no other brackets or other parts of any sort required to fit these? Also does it cause problems fitting the Advanblack fairing spoiler kit for 17+ RG? Best wishes.

[@sikbaggers]

you wont need anything special to mount these but you cannot run anything other then the chopped guard if you want to run the spoiler kit.it connects to the bar and its very specific where it connects.

[@johnholley7749]

Will these protect the bottom part of extended bags? Having a hard time finding any that extend low enough to protect that extra 4" on the extended bags.

[@sikbaggers]

yeah i dont think they would...they just stick out instead of curving over.

[@jamesdunn3508]

Those are awsome. However I have advan black stretched side covers and bags also chin spoiler. So it looks like neither will fit with them. Am I corect?

[@sikbaggers]

yeah...same for me man...i cant run them either except on my rg ST build im doing...wont work with stretched side covers or the chin spoiler

[@davesexton6395]

I’m running stretched side covers as well. On site I see no option but to order full kit for touring bikes. I like the look of just the front. Also benefit of some function for foot rest. I just emailed Burly to see about just the front crash bar as an option.

[@patrickdezinna6489]

Is there somewhere in NY NJ area where one can demo an Advanblack seat? Want to try assault seat

[@sikbaggers]

they dont have demo seats really at any location other than at the rallys...as of right now one of our reps, Eddie Byrd, sets up for Spring Daytona and also Sturgis every year.

[@Zach-ci7wb]

Hey Steve I'm planning on ordering this, question thou was there any issues with fitting the rear bars do to exhaust?

[@sikbaggers]

Hey Zach...no issues, they are designed to fit with dual or single exhaust

[@Bagrman-kt1ot]

SWEEEEETTTT🤩🤩

[@sikbaggers]

thanks for checking it out man..much appreciated.

[@Fly1Style]

Kits for the 2009+ "twin cam" style frames are backordered. Most of the performance bagger industry doesn't want to acknowledge how many of those bikes are still out here. They say "Those guys buy meathooks, audio and extended bags", I know brother. But consider the number of those bikes on the road. Make the parts. You'll be fine.

[@sikbaggers]

yeah thats the second video ive put out in a row that the parts sold out shortly after the video...the last factory 47 engine guard video was the same but those are meat hooks lol I have no idea when I make these how much stock they have but the website on this one says Estimated Ship Date : 5/1/2024 so thats not too bad.

[@kevincarnes7598]

Great video as always Steve, do they happen to come in chrome? I didn’t see that on the website… They do look sick though!!!

[@sikbaggers]

thanks kevin..but I dont think they do...Im not sure off hand any of the brands that make them in chrome now that I think about it.

[@kevincarnes7598]

Damm… thanks Steve!!👍👍

[@RoderickCross]

Is there a reason you switched the direction you mounted the two rear bolts that were on the saddle bag mount

[@richardala8108]

I noticed that also and was going to ask the same question.

[@sikbaggers]

nope you can run them either way...instructions even show running this way for some reason but it really doesnt matter

[@marshajacobus5205]

Question. Do the protect as well as harley stock crash bars

[@sikbaggers]

absolutely they do...they come out just as far as oem guards

[@NickZimmerman-HawkeyeZim]

Steve, it looks like these WONT work with stretched side covers, would you agree?

[@sikbaggers]

yeah no saddlebag gaurds will work with stretched side covers

[@jeremyboutilier8944]

Hey Steve just outa curiosity, do those work with 4” extended bags??

[@sikbaggers]

yes sir they will work with any bags, they just wont work with stretched side covers.

[@kgl1056]

Will the front fit with an advanblack roadglide fairing spoiler?

[@sikbaggers]

no im sorry you will have to maintain the stock oem set up of the chopped guard and the fairing support bracket for that...just the nature of the install and where the clamps fall out.

[@marshajacobus5205]

Looks like it will be less involved for the front on my 2012 street glide

[@sikbaggers]

as long as your clutch cable doesnt need to be moved then yes it will be easier

[@marshajacobus5205]

​@@sikbaggersI saw you used loc tite, but didn't see you torque the bolts. .is torquing not needed

[@jontnoneya3404]

Hey what's that stand your tools are on?

[@sikbaggers]

gearwrench mobile work table...its kind of high right now..I only paid 149 for it amzn.to/4adRwxj

[@rubenchavez7761]

Will those side panels come off easily?

[@jamesdunn3508]

They pull right off. And push on.

[@sikbaggers]

yes they come right off, no issues.

[@Jacblack69]

Steve what's happening brother, I have a question like always i come to you ,because you know tour sh#t ,I have a 2011 road king, I have light i want to put on it but I don't have plug and play,can you do a video on how to hookup lights on a older touring bike ? Didn't know if you already had a vid out,appreciate everything you do brother

[@sikbaggers]

Hey man...appreciate that...I would need a bit more info on which light you are doing..I may already have a video on one...but I dont know which one you are wanting to do..l.et me know and ill do my best to help you out.

[@Jacblack69]

@@sikbaggers thanks for getting back to me bro,so I have aftermarket blade lights for the bags and a few decorative lights to put under my bags ,I have no connectors for them

[@sikbaggers]

@@Jacblack69 if they are LED you will need a load resitor and custom dynamics makes one that will allow you to add LED and also add aftermarket lights depending on the plug that is used on the light...give them a call and let them know what you have and they will hook you up....they just need to know what pin connector your lights have

[@Jacblack69]

@@sikbaggers hey,thanks bro,but still do a video on it,all my mods I've done its because I watch you,that other guy law abiding well ill leave that along,my 14 + bags fit nice because you showed me how to do it...I'll be waiting on the bag blades for 09-13 bikes 😆 🤣 😂

[@dthompson5478]

keep in mind that if you have a full engine guard , this will not work unless you change the fairing support brackets to the ones the mount to the gas tank bolt.

[@sikbaggers]

15 and newer road Glides don't even need the fairing support brackets. Check my video on lowering your road glide fairing....thousands of people running the rg with no supports. 13 and older you will need the hidden fairing bracket.

[@jdsfx4]

I put the Santoro fairing support brackets on. I’ll have to check your other video because if I don’t need them, I’ll take’em off. ‘19 RGS

[@sikbaggers]

@@jdsfx4 yeah youre good you dont need them...check my video here and in the start of it its the first FAQ I get about these kzbin.info/www/bejne/Z6PGqpePYpKNe9E

[@zavlo72]

this isn't the regular guards. this is for hardcore stunt bikes!

[@charlesboard5741]

They are also used on performance baggers. Even the 2024 CVO ST has them now. Harley Davidson has them on their website.

[@zavlo72]

@@charlesboard5741 I know. I was trying to be funny and note how heavy duty they are

[@sikbaggers]

hahha yeah man....they are beefy!

[@freebehindbars8654]

$900+ 😂 I’m good on that.

[@sikbaggers]

the 900 dollar price tag is under any other equally built set of these bars on the market. If you want bars like this you will pay the price...thats why it awesome to have so many options these days on upgrading our bike...there is always something that is in our budget.

[@TyRogers01]

#beefy

[@sikbaggers]

yes sir..thanks for checking it out bro!

[@michaeleddy316]

I don't know. I mean obviously each to their own, but I really don't understand the purpose of this type of design. the whole idea behind crash bars is to protect your fairing and bags in the event your bike falls over. All of us at some point in our riding career is going to have a bike fall over and probably more than once. All it takes is putting your foot down in the wrong place at the wrong time and catching a little bit of sand or loose ground and out your foot goes. I don't see how these bars could possibly protect anything unless it's falling over on a hard surface. if you're on anything other than a hard surface, these things are just going to punch right through the ground and all of the parts you're trying to protect are going to still make contact.

[@sikbaggers]

I see your point about it punching the ground if you drop your bike on a soft surface and good point...however even the OEM engine guard will not protect your fairing ...it sits way in under your fairing, specially on road glides...they are called engine guards and saddlebag guards..so your fairing, depending on how you drop it will more than likely take a hit with this style or your OEM style.

[@michaeleddy316]

I've been fortunate then. I have a 20 rgs and I've dropped it twice. one to left side and one to the right. left was on some leftover winter sand. to the right was in a rest area in Wyoming. got blasted with a massive wind gust right at the moment I was putting my foot down. that one the bike went literally all the way over on its side. not a scratch on my fairing either time. and my bag guards protected the bags. again, maybe I got lucky both times but so far my OEM bars have protected things.

[@tkchillin2065]

In the past few months, I have been hearing stories of riders being impaled by this style of engine guards. I don't know if there's truth to any of it.

[@sikbaggers]

hhmm never heard that...i guess I could see if you went down in some crazy way it could happen though

[@josiahdemeire6655]

Hey Steve, have you had your wife on the back with these yet? I was curious if its comfortable for a passenger?

[@sikbaggers]

Your passenger wont even know they are there...the legs are a good little distance from them with their feet on the rear pegs.

[@garygerfelder2935]

Burly Brand does not sell front and rear sets individually so people owning a street or road glide with lowers cannot purchase these

[@sikbaggers]

yes this is a kit and not sure why they wont sperate them but they dont

[@BurlyBrand96]

Keep an eye out - we're working on it. Should be able to purchase separately in the next upcoming months as well as the addition of some colored slider options. =X

[@sikbaggers]

@@BurlyBrand96 Bad ass ...thanks for the update..I had a lot of emails on that same question after I released the video.

[@BUBS_HD]

I know u can't say that 10 times fast 🤣

[@sikbaggers]

haha i was trying to tell my wife about it that night and I still couldn't say it! lol

[@Harley-Vols]

Them things are ugly, and I don’t see any real improvement over stock, if you wanna make your ride ugly, then definitely get these.

[@sikbaggers]

yeah its meant for a certain style bike and they aren't for everyone...but they are definitely a popular seller.

[@hydroboy35th]

Lost me at “them things” also looks are subjective.