OLD GAS FURNACE WILL NOT HEAT HOUSE

[@richardreynolds9885]

Good man Steve having patience with that helicopter!

[@porky7753]

The brother should of just taken care of the bill, what a tightwad .

[@snicks50]

Yep I agree

[@maddydog]

Maybe he didn’t have the money, don’t be a hater

[@Bob.W.]

No way I'd work for someone who refused paying a prior bill.

[@mailmanjoe]

Fool me once shame on them fool me twice shame on me. Either way yes it's a pain to deal with people like that.

[@topher8634]

You could tell by how the blower motor started up after the capacitor was replaced that it wasn't gonna last long.

[@alpowell1056]

You have the patience of a Saint in dealing with the customers having such issues. I totally understand the need to get paid, thankfully the Brother is able to square away the bill $$

[@AmericanFarmerHVAC2024]

If you pull the blower, crawl in it and look at the heat exchanger. These carriers were known to crack. But the funny thing is, the older they are, the more durable they are. I found a 1992 version of one of these and zero cracks, nuts.

[@johnalbrecht4332]

That dog doesn’t bite and the check is in the mail 😂😂

[@reese8752]

With 7 burners, you better be blowing some air

[@picklerix6162]

@@reese8752 - Yeah, I was a little surprised that he was contemplating a 1/2 hp motor. I haven’t checked prices on those generic 3/4 hp blower PSC motors lately. Ten years ago, you could buy them for less than $100. Some of those ECM motors got crazy expensive during the pandemic. Some parts just weren’t available.

[@ClickinChicken]

It sucks things get old and break, is what it is. THanks Steve! I came back!

[@LenInMI]

That was a great job. Miss Molly approved.

[@mwolrich]

Steve, your a good man helping out the elderly, they get nasty when they loose their marbles, very sad…

[@joemartinez-673]

Thank you 😎 🤟 . From Denver , Colorado.

[@Gman2930]

Steve “I GOTTA GET HEARING AIDS JUST TO HEAR MY GIRLFRIEND”. Customer “DID YOU SAY YOU NEED HEARING AIDS”. I ❤️ it!!

[@duotronic6451]

Customer is fortunate Steve Lav helped them. I would have demanded the $200 discount from last job be paid up front before I started the new job. ❤❤❤

[@PostalBound]

Yep, 9 out of 10 shops would have told her she needs a new unit. You are a good egg Steve !

[@fredknapp2177]

You definitely don't want to lose your unit!

[@tammytoncray9600]

If it's a Carrier unit it runs a fan cycle after the power has been off. The old ones do.

[@AmericanFarmerHVAC2024]

All of them do that. Even the new ones.

[@tammytoncray9600]

@AmericanFarmerHVAC2024 my Trane units do not.

[@SFBay69]

@@tammytoncray9600 Good way to crack the heat exchanger

[@AmericanFarmerHVAC2024]

@ you said carrier. not trane.

[@TheBigbass13]

Steve you’re a gem!

[@jimmyday9536]

Keepin' warm in Baltimore! There are still plenty of these furnaces still in service.

[@dane6353]

Flippin guy hangin on ya like a pending day!

[@alphaomega2556]

Nice job on the furnace. Good advice on the pills. You called it that his tool would stop working before he mentioned it. 😂

[@46fd04]

I have the exact same fan. The old motor had to be oiled annually. The only way to do it, was remove it from the fan, just like Steve did here. It was a royal pain to get the motor shaft out, and back in. I used a hammer and a punch to get it out. I sanded the shaft, cleaned it, putna coating of 3-in-1 oil on the shaft, and reinserted it into the fan.

[@christopheromeara689]

Oh . Yeah it’s the flame sensor.

[@drivesecure2476]

Good job that furnace is old you are heck of a guy to work on their stuff after not being paid on time for the water heater

[@ClickinChicken]

You go to the nth degree Steve! Really Proud of you!

[@mailmanjoe]

600 is a steal for that job. You're too nice.

[@LenInMI]

Customer just says "flick it like a bic" 😂

[@markamcampbell5795]

if she won't pay you her son should.

[@mpalaskokkalis1476]

Perfect 👌 service

[@KW86.]

I use a tie rap to test rotation, stick tie rap into fan blades, not your finger 😂

[@pauljohnston7700]

Steve, if this plumbing gig doesn't work out, you should go into social work. LO effin L. Keep up the great work. Paulie from down the Cape.

[@timshields5308]

Curious question steve, ive been in the hvac-r trade for 20 years, half as long as you.. how come you dont carry an use a little compact drill for all disassembling an assembling. Besides my knees the wrist where the first thing to bother me. An the compact drill was a life saver, an quicker. Was just wondering if there was a reason for that?

[@mikethomas5505]

I wouldnt do it until I was made whole then cash up front

[@EliasRangel-i2j]

I see you milking that clock my boy. Gotta get the money from the boiler somehow. Love the videos.

[@edwardkuntush9339]

I would never work for her after you had to track her down the first time..

[@frankjgornickjr3676]

You should have checked the furnace filter too. They probably haven't changed it for a long time! Great job!

[@AleksandrZubko-yx6uj]

If my HVAC technician would tell me, that the furnace Inducer fan is not working because of the dirty flame sensor, I wouldn't pay him ether . LOL

[@desertbob6835]

That's not dementia...that's Yankee cheapness!

[@maddydog]

You must be a maga sheep

[@NJVINNIE199]

So did you get paid ?

[@jackl9922]

I remember that one. You are nice.

[@ClickinChicken]

My Dad had that problem, as a private practice Podiatrist. If you can get them to pay you. I'll come back to watch!!

[@jeremymanning6967]

Steve if a carrier product has power shut off and when it’s turned back on threre is a call for heat the board automatically runs the blower for 90 seconds then starts the heating cycle. The board will also flash code #12.

[@DAS-Videos]

We have to hear the story about Mumbling Meemee. If she is even a little bit like Saddlebags Sally it will be very funny.

[@stephenkruft2213]

Have not seen you use puller before.

[@frankjgornickjr3676]

I didn't see till the end you did get the filters cool.

[@tomdale1313]

Steve will get his money, just to think they called him back

[@tonym6920]

Hey Steve and Miss Molly! Workin’ again ya’ll. 👍👍.

[@anthonysuski9248]

Awesome!! 😁👍

[@iamnoone.]

Howdy Steve and Miss Molly

[@chuckq54]

That has an electronic air cleaner, and the internal cells probably haven’t been cleaned in 30 years looking at that blower wheel…🤷‍♂️ You’re a better man than me going back to someone that fought me over payment no matter what her mental state is/was

[@Psalm1101]

He never swears im done

[@tammytoncray9600]

I bet you can't buy a motor for $175.

[@mikehouser5430]

Crestor works no issues

[@mikes7639]

Alot of suppliers are pricegouging

[@frankrizzo3915]

Hello Steve!

[@brentaudi9354]

Was is spinning the wrong way at the beginning of video?

[@LenInMI]

No squeals 😮. 😊

[@whitneyince3612]

I want a video with your girlfriend

[@john7017]

Yes, we all want to see that!

[@mikepottes]

I don't think Steve's ready to do a shower scene yet. Well then again maybe he is.😂

[@Robert-xv8kc]

Steve, I’ve been watching you for a while. You’re a good man. I’m in the field just as long as you are I have a question. Why didn’t you look at the nameplate on the furnace? Maybe the guy before you put a 3/4 hp. That’s why there was a 10 in there. That’s all he had in his truck and he forgot to put a 15

[@sku32956]

Most outfits here wouldn’t even work on that furnace. They just red tag say it’s too old to work on unsafe.

[@terencemerritt]

I don’t know why people want to stand over you the whole time lol.

[@highwolf8022]

Yahtzee! Yee, Yee!

[@johngallati8164]

TEACH HER SIGN LANGUAGE STEVIE😊

[@lancelawrence3259]

Nice work

[@46fd04]

I have a 35 year old mid efficiency gas furnace. In 2021, the motor died one night and the house was chilly. I pulled out the motor myself. It took 3 days to find a replacement. I did the labour, and the motor still cost me about $285 CAD. Took 4 hours to change it, inc. time to vacuum the furnace, clean the flame sensor, change the capacitor, etc... Would've cost me over $800 CAD had I had a Pro do the job.

[@Ogtonyg]

Man steve cracks me up. Draft motor not spinning no good, probably the flame sensor, blower motor shot.

[@Im777-d9v]

Hey Steven do have a sigh first before you do work with the maximum days for payment or up front I’m pretty sure you have a lot of story’s of people not paying you.

[@darrenskinner5928]

Nice job Steve I hope you get paid nothing like eating a shit sandwich I had my share

[@tomsadler2961]

You don't sound like 80

[@metal2444]

TOO MUCH CHIT CHAT ! JUST CHANGE THE MOTOR AND GET PAID !!!

[@markpowell1031]

First comment

[@DAS-Videos]

2nd! Hello!

[@billkimberly3154]

You need to be reported Price gouging people like that. I'll never watch another one of your videos.

[@yrs94]

Let's hear your pricing

[@ernieramos4213]

🤣🤣🤣 he’s way under priced lol

[@mikes7639]

Good riddance thats the kinda customer a guy dont need things are all more expensive you maybe want him to work for free ? Do you work for free?

[@terencemerritt]

Hey bill, it’s not an airport. No need to announce your departure. Don’t let the door hit you in the ass on your way out. You must be hard of hearing g saying he gave her a $200 on the first time just to get paid. But if you work for free I have a bunch of work needing done

[@picklerix6162]

Steve’s pretty good on the pricing in my opinion. Yeah, I repair my own equipment because most of the HVAC service techs in my area are crooks.

[@TheBigbass13]

Steve you’re a gem!