How to make shopping for wood at a home center less horrible.

[@marca8881]

My proudest moment was when I walked into my local lumber yard and announced "I'm new at this and don't know what I'm doing. Do you have an employee that can help me figure it out?" The guy laughed and spent the next 20 minutes walking me through the store explaining most of what you just said and helped me pick out the best boards for my project. Don't be afraid to ask questions. Better to announce your short comings and willingness to learn than to pretend you know what your talking about and make mistakes.

[@Ashitaka1110]

Lumber yards are great. A lot of family-owned businesses with employees who know their stuff and are helpful and hardworking. Most of the Big Box stores seem to employ dingbats who don't know a Philips driver from a doorknob and are just there phoning it in for a paycheck.

[@kwizmon]

Absolutely not. Act like you know everything about timber and tools and scoff when someone offers help. It's what 'real men' do 😉.

[@CurtisMassey]

Yeah, it's been my experience that woodworkers that are cashiers or store owners have always been more than willing to help.

[@michaelhumes5446]

Sadly, I've been known to help folks at Home Depot (I'm loyal to the orange) with their projects. I've answered questions about techniques, and shown them where items are located. Yes, I kind of got bored some times over the last two years. Lots of time on my hands......don't hate me.

[@michaeljunnier37]

Great video Steve. As a manager at Home Depot you make great points, I really like when you said be considerate and put the boards back when your done. Nothing drives me and my staff crazier then someone tearing apart a bay of wood and leaving a huge and dangerous mess. I am jealous that your store carries woods like cherry. Mine only carries oak and maple. Also really liked the way youe explained the carts and the uses. Nothing is worse then trying to put a board on a regular shopping cart. As for the saw, sorry to hear you can't find someone to run it ever. We to have issues with them breaking, but a lot has to due to rough handling. All in all a great video!!

[@ailivac]

last time i got a 4x4 panel i wanted to get it cut to fit in my car (needed 3 16" wide pieces) originally planned to get 3 melamine boards or something (so didn't bring the roof rack or cordless saw) but they didn't have enough of the right size. and the panel saw was down. that was when i realized the maximum opening of my car's doors is about 47.25" so roof was the only option... thanks to their out of service equipment that store made another $4 off of me for a pair of ratchet straps!

[@phantm24]

Hey I'd be happy with a bit of cherry, we only get pine and meranti down under

[@carasmussen27]

I always replace the boards and if some are the wrong ones I put them back in the right place. :-)

[@ex-nerd]

It's worth mentioning that even Orange and Blue will usually give you at least one free cut on a large sheet of plywood, and even if they charge you for more than 1 it's cheaper to buy a 4x8 sheet and cut it into four 2x4ft panels than to buy four of that same size in the pre-cut panel section. Their big panel saws will always cut straighter than you can get with a circular saw in the parking lot, too. I'll also recommend getting some Carhartt silicone work gloves -- they're great protection, a lot more comfortable than leather, and the silicone is grippy enough to make a big difference when trying to manipulate those big sheets of plywood.

[@esorth]

I usually have them cut my plywood into 3, 3, and 2 foot pieces. Gives me the biggest pieces that fit in my car trunk, and they've never charged me for those 2 cuts.

[@JNRII]

The ones I have come across at the box stores near me are broken 1/2 the time, or the blades are garbage and splinter much more than a portable saw with a good blade. So, what I do is allow for the extra 'waste' when figuring how much to buy.

[@CaptainWyatt]

I find when I show up with a detailed cut list and know exactly what I want, they generally seem to enjoy the challenge and the chat when it's not a super busy day - and I have yet to be charged for cuts :D

[@866martin]

I had them make 3 cuts the other day they will cut it how ever you want

[@surge3518]

Omg the Carhartt gloved are a life saver. Have you tried the level 1 cut resistant insulated gloves? The rubber coating is very porous which grips so much better than the smooth texture on the non insulated gloves. The best feature is the insulation. For me the extra padding makes holding edges more comfortable and absorbs sweat so my hands don’t slip around inside. I feel like I have vice grips for hands when I wear them.

[@VeryVeryAngryPotato]

I just want to point out that while home depot is convenient, I always try to go to a lumber yard whenever possible. I bought home depot pine for a long time before I decided to check out my local lumber place. They had furniture grade pine for around 1/2 the price of what home depot charged for much better quality and much wider boards. When it comes to hardwood it's even more of a difference.

[@joekagerer]

I found this to be true some years ago, I bought small screen molding from my lumber yard at $0.25 per foot. I needed more, and had to go to home depot, and their price was $0.65 per foot. I was quite shocked to see the difference.

[@joshmonaco6170]

@@bierbarrel lumberyards are always far cheaper than big box stores and they have better quality wood and you can get it pre milled or rough cut

[@lumberjill6598]

Or do what I did and buy a sawmill! 😁

[@jackfrost8439]

At least in my area, it is difficult to find a lumberyard that will allow me to pick through the lumber to select the boards I want. At H.D. and Lowes I can pick the boards I want.

[@VeryVeryAngryPotato]

@@jackfrost8439 Yeah, that's the issues a lot of places. I know I am very lucky where I live (north georgia). I have a really good lumber yard around 90 minutes away or a very mediocre one 15 minutes away if I don'tfeel like driving, but both let me pick through as much as I want.

[@christiantherunnerup9905]

Having just started dabbling in woodworking 4-5 years ago, I still remember how intimidating my first trip to a home center was. Wish I would have had your help back then!

[@verse101]

Exactly. Loved this video, but didn't learn much.... because it took me about 3000 times up and down the aisles to learn it.

[@kioarthurdane]

I love this concept, as I've personally had to get over the difficulty of learning this without guidance. I'd like to see more on this subject, of sourcing and buying materials like plastics, metals, more "exotic" materials like those aluminum X channel bars. I know I shouldn't prejudge the help at some stores, but I have a lot of baggage asking for help from the comic/game shop as a kid (and I know that was probably weighted to me having only $5 allowance to spend in the early 90's) and half the time if I couldn't figure it out on my own, I just left the store and gave up on my project.

[@MindlessWanderings]

It's truly amazing how similar the experience is everywhere there is a big box store. In Australia Bunnings is the name of our home depot but with the exception of the orange replaced by bunnings green (and metric) everything was identical.. right down to the disused panel saw.

[@cjlamber]

Bunnings don’t have the variety of species in their wood board aisle. Pine, Tasmanian oak and Meranti are the choices for wood workers. Other than that there are decking boards in the builders section as well as an off cut bin for cheap bits and pieces. There’s no walnut, cherry or maple so have to make do with what you can get.

[@roberthill7327]

and the rubbish timber

[@roberthill7327]

@@cjlamber the choice of timber in Aus is absolutely rubbish.

[@peterminiutti9553]

The price of the timber in Australia seems on par, but having visited a home depot store in my travels, their power tools are so much cheaper than our in Australia.

[@Zack-xz1ph]

2:40 spit my coffee, did not expect Steve to cuss 😂😂

[@trentthompson2928]

So TRUE!!!!

[@brookslyle402]

Ass? 😂 is that cussing now?

[@shellderp]

he didn't cuss

[@ebrooks24711]

Maybe it's because I am in the friendly state of Texas but Home Depot guys are always right there to help me and answer questions. They have been great and always want to see pictures of what I am building.

[@HeliRy]

Another tip for the big stores is to find their “cull wood” pile. It’s a dog’s breakfast of offcuts, warped and knotty boards, and stuff they just need to get rid of to make room for newer stock. Lots of it is garbage destined for the dump, but you can often find really good useable pieces at vastly reduced prices. I usually make it my first stop when shopping the big stores for wood.

[@trublgrl]

If you are starting out or just doing small projects, ask if the store has a selection of off-cuts and remainder pieces. They may have a cart like the one @8:08 and they will practically give away those pieces for a low price. Sometimes they have very nice hardwood in a size no one will want, and you can just grab it and save it for an inlay, or a little thing like building a handle, and you win on the price.

[@robertbamford8266]

Excellent advice. A few other things I learned the hard way. For heavy sheet good on lower shelves, pull it out, stand it up on the 4’ end, line it up with that center section, and tip it onto the cart. For any board, check for edge knots, gouges, chips, and checking/splitting on the end. I sometimes bounce it on the concrete floor and listen for anything other than a solid sound.

[@gregmccright]

Nice video, as usual, Steve. I work part-time at Home Depot about a month away from my 20th anniversary. I routinely spend lots of time with novice DIYers helping them better understand what they really need to complete their project. I wish more customers would watch your video. It would make their shopping experience much easier and more enjoyable. By the way, if you ask for help at your local HD, you might be surprised that some associates actually know what they're talking about.

[@bearthompson6506]

From personal experience, one of the most valuable pieces of advice in this vid is to make sure every piece of lumber you take to check out has a barcode on it! 😉

[@christophermadden5679]

I usually take a picture of the price tag too, just in case. I’ve only ever had one cashier refuse to believe that I was showing her the proper tag-everyone else has so happy not to have to search for the UPC that they gladly scan my phone.

[@manuelsalazar2729]

The home center close to my place has a different system. The personel gives you a piece of paper with the code of the lumber you want. You pay for it, then use the receipt to check out. You don't have to carry everything arround

[@Titannurse]

Steve you are the most approachable woodworker on KZbin. Valuable tips with humility.

[@yawn2992]

This video gave me a lot of confidence to walk into the local hardware store and purchase some lumber for a workbench!

[@JonnyDIY]

I feel like such a badass everytime I hang my measuring tape on my belt before going into the Big Box Store 😂

[@timberrecycling]

I used to work at "blue store" and WOW I wish every customer knew all this!! Fantastic!

[@ekul42]

Looking forward to the lumber yard video

[@tuckleberryfinn5271]

Cordless circular saw is a must have tool imo. I have always struggled to borrow a truck or a trailer to get sheets home. With that circular saw, I can break down the sheet to rough dimension and use my mini van with 4 car seats permanently installed to get the plywood home

[@thestig007]

Totally agree. It's super convenient to be able to cut boards out in the driveway or even in the back yard without dragging a power cord around too.

[@brentfowler2317]

Well done Steve! I worked at home Depot for a couple years. So I can appreciate you .

[@David_K_pi]

This was a great video. You touched on just about everything, especially those subtle items that many folks won’t understand early on. For instance, understanding the difference between lumber that is sold by the piece versus that sold by the linear foot will help avoid embarrassing moments at checkout. My day job had me sitting in front of a computer most of the day. I have a little bit of carpal tunnel, but no calluses. Therefore, I usually take a pair of gloves with me to protect against splinters and cuts from the sharp edges on plywood. The gloves I like are the stretchy ones where the palms and fingers are coated in rubbery nitrile. I also carry a small, pocket-size tape measure so I don't have to wander around the store looking for one. I really like the Stanley 10-ft tape with a scale on the back for directly measuring the outside diameters (OD) of metal tubing, PVC pipe, etc. (Some woodworking projects use materials other than wood now and then.) My preferred tape measure is a Stanley model 33-115. (I have a cheap engraver that I use to carve my name on the side so I won’t get suspected of shoplifting.) This is the one mentioned above with the OD scale on the back side of the tape. Thank you for the excellent tutorial. I am looking forward to the one about shopping at an actual lumber yard. I haven’t done much of that yet, so I’m sure it will be enlightening.

[@Dragon_With_Matches]

I work in the lumber department at my local Home Depot. I wish our customers were considerate enough to put away all the lumber they make a mess of. When it comes to hardwoods, we only have red oak, maple, and poplar. I wish we had more options… Great video as always!

[@carbonstar9091]

I worked in the lumber dept at an HD many years ago. So I understand the frustration of lumber strewn everywhere. But I have also been working on jobs/projects and had to find the two good pieces of wood in the stack of barely-fit-for-construction garbage.

[@carbonstar9091]

@@jnielsen1956 9 times out of 10 it just goes back on the pile. Which is why so much crap can accumulate after it has been picked clean a few dozen times. We would pull the worst stuff(sometimes rotting and full of voids) and throw it out back behind the store for disposal. For anything valuable we had a culls/cutoffs bin that people could buy from. Usually its not worth the labor to piecemeal out the cheap dimensional lumber. I don't know enough about the supply chains or the quality control at the mills to say how it is for any given region. I assume there is some variation.

[@rustyshacklefordrefined5756]

Sounds exactly like the lumberyard I work at.

[@jsa-z1722]

Brilliant video Steve! It’s exactly what all weekend woodworkers need to know. In Australia, just substitute “timber” for “lumber”, “Bunnings” for “Home Depot“ and “pine” for “wide range of good-looking maple, cherry, walnut etc.”

[@Reptilia12]

And don't forget to watch out for those onions!

[@gingerrobinson6483]

I appreciate this video. I am a beginner and I found that my orange store is very helpful. The blue store sometimes has better quality but is not so helpful or organized. I am lucky that they are a quarter of a mile from each other, too. I did not know about furring strips when I bought the wood for my first real project - the California Side Table and I bought these and used them. It was a beginner project after all. I have been encouraged by all of your videos. When you say beginner you actually mean beginner unlike some of the other videos I have found.

[@leesmart1971]

Popped into my local big orange store here in the UK today to get some MDF. Quarter sheets were 2x the price per sq.ft of full sheets so, as I knew my project could be made from quarter sheets (2ft X 4ft) I went over to the cutting area and pushed the "Press for help" button. 30 seconds later a member of staff spoke to me through the intercom. I told her I needed a 12mm full sheet, cut in quarters and she appeared in a matter of seconds. She helped me lift and carry a (checked for quality) sheet off the shelving over to the saw station. She set up the cut positions and we loaded the sheet. 2 minutes later I had 4x quarter boards of exactly the same size (which she confirmed they would be before she cut them). Perfect!! Up to 5 cuts are free of charge. Sharp blade. No burning or splinters. £32.47 (about $44.40) for a 12mm (1/2") 8' X 4' sheet of regular MDF.

[@akuo72]

Great video! Two more tips I learned the hard way: 1. Bring work gloves. Handling lumber with bare hands is less comfortable and invites splinters. It will be easier to manage, especially if you are putting wood back and forth because it's crooked, etc. 2. Bring a tape measure. You know you have one. I realize that Steve mentioned grabbing one from the appropriate department, but 1) that's a pain every time, and 2) ew handing something that 20 people have previously handled because they also forgot to bring their own tape measure, especially in these times.

[@PJBonoVox]

Your second point is pretty stupid. When you actually need to buy a tape measure, what do you do? Wear gloves and bring disinfectant?

[@LZP123]

@@PJBonoVox You don't need to say it's stupid to disagree with it. But anyways, he meant that if you have a tape measure it's more convenient to bring it with you (rather than walking to that aisle and back). If you don't have one you need to buy one first obviously.

[@booboo8577]

Those employees just love returning all the tape measures from all over the store back to the shelf when thoughtless and "too cheap to buy one" customers feel they can just pick up tools off the shelf and use them anywhere they want.

[@michaeljoy6945]

No truer words have ever been spoken 👏

[@simonvaughannikon]

I wish you and your channel were available to give this advice when I was starting out but we didn’t have KZbin in those days. (The Romans were still here in England!) If you have a timber mill within reach, popping in there and striking up a relationship with them can pay dividends long term. Thanks Steve. As usual a great video!

[@SubtlyAggressive]

When I built my 24'x18' deck I hand-picked and examined EVERY board I used! Rented a U-Haul and spent a full day going in and out of Home Depot buying 2x4's, 2x6's, 6x6's, 5/4x6's, 2x10's. I was wearing an orange t-shirt by chance and people kept asking me for help - that turned a 8-hr job into a 12-hr job. We saw 3 different shifts of store staff come and go! LOL

[@JerryRandalBauer]

My local HD is great! The staff are friendly and helpful, the inventory is almost always adequate, returns (when needed) are courteous and efficient. My nearest source for more interesting hardwoods is 90 miles away, and the local ACE often has better and lower-priced softwoods and sheet goods, and they'll deliver! I can check availability and prices for both HD and ACE on-line. Most of the time HD is my go-to, and I like it.

[@BronkBuilt]

Great info. At my HD they always seem to put the bar code on the underside of the plywood sheets making difficult at checkout or very difficult if I turn if over on the utility cart. Oh, those stick on bar code!!!! I can never seem to get all the residue off.

[@dejanveselinovic9562]

Very good video, it is nice to see that this process is exactly the same as it is here in Australia. We have a different and smaller range of specialty wood at our home depot (which is named Bunnings here) most of the species of wood are locally sourced. In case if you are looking for more exotic range of timber it is required to look for and visit a specialty lumber yard or suppliers. Another thing I wish to mention is that those are excellent tips for the beginner or a diy worrior, especially these tips : How to get the lumber to your car, being prepared and bringing a circular saw to cut your timber pieces for easier transport home, to make sure that there is a barcode on one end of the timber so your shopping experience is much quicker and more pleasant, plus you get to go back to your project in time. Great video!

[@chaseramirez7682]

Always love your stuff man!! **ONE HUGE PRO TIP** (if I may sir..) Bring a pair of basic working gloves (Utility makes a great choice, I actually get them at my Home Depot as three pairs for roughly 10 bucks)... when you're going back and forth from moving wood... all the 2x4 / 4x4 lumber and 4x8 sheets... checking which pieces are splintered or have knots or have dings... a simple pair of gloves will save your hands a ton of headache!! I keep a very basic pair in the glove compartment for just that

[@SreggeHammer]

I genuinely appreciate your insight on these types of challenges. I think I'm about ready to move on to a lumber yard, but you're right that is very intimidating. I look forward to that video!

[@wargboyz]

Really looking forward to the wood mill video - I'm always so intimidated by those places!

[@billsedutto8824]

Great video Steve. I would also mention don’t be tempted to order online and have the lumber delivered. They will just grab whatever is on top and it’s a crap shoot if it’s good or not.

[@johnkelly8104]

Just loved this video. I work in a DIY store in the U.K.But this was an eye opener. Very different to our stores and certainly not all to the good either.

[@thisisbethm]

As a Home Depot cashier thank you for some of these. So many people miss the LF (which I admit is very small) and are shocked by prices). And the bar codes for many cashiers are completely unfamiliar with lumber and have no idea what it is. If there’s no bar code on the board you want, bring up another with the bar code and explain you only want the other one. Or take a picture of the shelf tag or write down the code.

[@sfan2767]

Recently I was doing a big project that required 7 sheets of plywood (and siding). In advance of this I made your plywood lifting cleat and brought it with me into the store. This made the trip way easier, my wife was able to help stabilize the cart rather than help me move the wood (and likely hurt herself). There's nothing wrong with bringing your own stuff into the store. I love your tip on the tape measure. I always mean to bring one and forget it at home or in the car 90% of the time.

[@MrWillyWonka]

Love your videos man. The shorts and the long ones. At 30 yrs old I'm now just getting into woodworking and whatnot because I love to build stuff. Since I'm very new to this kind of work, your videos are beyond helpful and always my goto. Keep up the great work man and please keep making videos as long as you can.

[@petewoodhead52]

Nice job Steve! You continue to be one of the most empathetic and helpful woodworking channels.

[@jessedoyle6759]

Great video. Now when my wife picks on me for taking so long to pick up lumber for projects I can say you said it’s normal. Love your content.

[@BR0JASON]

One more tip about the "common" boards discussed starting at 6:30ish. MAKE SURE to pay attention to whether they are pine or "whitewood." The "whitewood" boards are usually smoother and look like pine, but they are a BEAST to stain.

[@johnlittle4858]

Buy want you need not what you think you need. Best advice I’ve been given when I was starting out

[@sigogglin]

I agree with what others have said and start to go to lumber yards if they are near you. Don’t be shy they need the business!

[@JimLambier]

If at all possible, avoid the big box stores on the weekends. I find shopping in the evenings much easier if you hope to be able to dig through the boards to find ones that aren't hockey sticks.

[@billsedutto8824]

Yes especially holiday weekends in the morning!

[@thestig007]

This is a good tip. Home Depot is basically dead after 5PM on a week day. All the contractors are done, and you can take your time without feeling rushed.

[@fnscooter]

Unless you're planning to make a hockey stick in which case the wood is already shaped for you.

[@simarshall2474]

Equally, I try to avoid going during the week day. It's filled with tradesmen who are already pissed off because they're half way through a job and don't have time to go to a lumber yard :D

[@dohczeppelin37]

Good video. Those looking for plywood, do a little additional research on the various grades and types of that. Easy to grab a less-than-ideal one if you're new at this. It's good to know how to navigate the lumber section at the local big box, it is often the most convenient place to go, but the ultimate tip is to learn where the nearest lumber yard is that will sell to retail customers. The big box is fine for 2x4s and a sheet of plywood and "mixed projects" where you need a bunch of other supplies in addition to lumber. But for anything other than construction lumber and lower grades of sheet goods, the pricing, selection, and quality are likely all to be much better at the lumber yard.

[@someonespadre]

I’m working on a small bedside table for wife’s family member. I’m using all reclaimed or cutoff wood from previous projects. I tried to donate a wooden sleigh bed frame, they wouldn’t take it so I’ve been dismantling it and using the parts for various things. I’m making table legs out of the slats that were under the box spring. Glued them in pairs and cut them into table legs. Sanded them, I think they are red oak. They look really good. I find the Home Depot stair treads are really good too, better than the typical pine boards and cheap.

[@Ackbarfangirl]

Omg thank you. This is going to sound so stupid but I’ve been twice and just got totally overwhelmed and felt really out of my depth and left with nothing! This is exactly what I needed…rolling bed table, here I come! 🙏 thanks

[@rogerpowers4174]

been building with wood for 30+ years and this video is excellent ! LOL @ "fancy pants projects" ! thanks and take care Mr. Ramsey , jeff

[@bobwadsworth4799]

Very good video. I remember being so freakin intimidated buying a lot of lumber at Home Depot on my first big project. It shouldn't have been but it was really overwhelming and a little stressful, for me. I hope the beginning woodworker watches this and learns a little bit from it.

[@baaadgoat1091]

This video was extremely helpful. I've never bought wood at the home center because it seemed so intimidating. Breaking the ice like this makes it obvious how accessible it is. The note about some boards being priced by foot is invaluable. I had no idea. Do more of this!

[@hi_wifi_guy]

I live in Virginia and I have never seen walnut or maple at a big box store, only pine, oak and poplar. Steve is right, it varies by store. This is yet another excellent video by one of the best instructors I have encountered, I highly recommend his courses!

[@Brian-tb1zs]

Hey Stev, I mean Steve , 😆 Thank You for an excellent channel giving great advice with a touch of humor. You have helped tremendously !

[@bunglejoey]

Steve, I can’t thank you enough for this video. I commented on your community post about two weeks ago that I think was the brainchild of this video about how intimidating all this stuff can be. Keep this up, man.

[@alonzohollingsworth7712]

Loved the video Steve. Buying wood for projects can be intimidating as well as deciding what species depending on the project what you can get by with in an effort to save a few dollars. Thanks a bunch.

[@ReverendTed]

For plywood, the blue and orange stores near me will make two cuts in an 8'x4' sheet of plywood for free. I don't have a truck, so I usually look at my plans and see what cuts would make the most sense while allowing the boards to fit in the back of my car. Usually I have them take a 2'x4' panel off the end, and then split the rest into a pair of 3'x6' panels. Just like you said, however, it's a real crap shoot on whether either of the stores will have both the sheet I want AND a working saw.

[@nyllhad]

Great video, Steve. Also might be worth mentioning that a lot of these stores have a scrap bin that they will sell excess cutoffs at a discount.

[@verse101]

Life hack. Play dumb and ask an employee how much it costs. If they're nice they'll give it to you for free.

[@thestig007]

@@verse101 Yep, it's more work for them to dispose of it rather than just let you have it.

[@crowsnestsac]

Also check out the discounted lumber (the pile next to the saw). Sometimes there is good lumber there at a great price.

[@6yjjk]

So many practical points here that I'd never have thought of, probably even after multiple trips done the hard way. Great video.

[@StoneyAcresGardening]

Nice job!! Great video for the beginner!

[@BigTrainBuff]

Good tutorial on navigating a big box home center. Your point on bringing your own circular saw to the store is a good one. I bring a 4 ft t-square as well. Lowes and Home Depot both have sheet cutting saws in their stores, but they are often not working, operated by untrained personnel and/or make terrible splintery cuts.

[@KTXThrifts]

Can't tell you enough how incredibly helpful this video is!

[@maryb1618]

Thank you! Home Depot is so intimidating! This video is so helpful. I am just starting and getting more confident in my projects but the hardest part is the trip for the materials.

[@tegandrage8819]

This is great! When I first started a year ago, this would have been incredibly helpful so I’m sure it’s super useful for those starting out. And it was good to reinforce that what I’ve learnt over this year in regards to picking out lumber is on the right track. It was definitely an intimidating place to go the first few times.

[@JR0405]

If I’m buying something other then wood I’ll put a hand held basket in a regular shopping cart and then transfer the basket onto the lumber cart as I head for checkout. Also, if you have a green store near you I greatly prefer they’re lumber layout.

[@richardmastrorilli5001]

Yes more videos like this!

[@maniljoseph]

Always there is something special in your topic. You know exactly what a new woodworker go through.. I was surprised when you mentioned about tape measure. I do the same thing all the time.

[@HW-75]

Great video. I would also add bring pair of work gloves. they will help prevent from getting wood splinters on your hands and fingers

[@ClarileleMike]

This is great. I wish this had been available when I first started!

[@christophermiller5045]

The saw at home Depot works about as often as the ice cream machine at McDonald's

[@royseufert4387]

Thanks so much great info on proper wood shopping. I’m new at this to and learned about the bar code the hard way so now I use my cell and take a picture of the posted price to show the cashier.

[@Jumpman67]

As a beginner wood worker my biggest challenge is always transporting the wood from the big box store back to my condo. The store nearest me is actually only a couple minutes away but my car isn't designed for transporting all that lumber.

[@kevinharding2099]

Good advice. I feel strongly that I do much better by going to the local lumber mill and get boards where they were cut, but I still need plywood from the big box stores. There is no question that the quality of pine board from the local mill are a higher quality for less money than the big box stores. I was once told that the boards they think are not good enough to sell are sold to a big box store!

[@LKO2019]

Thanks for guiding us through this! This video is great for when you get started. Super useful and practical information. Started with my woodworking journey during the lockdown by making your basic box, still proud of that project. Happy that I found your channel and thanks for all the information and your humor😁.

[@phillipstanfill5392]

Can't wait for the trip to a real lumber yard

[@angelamarchbanks2621]

Excellent video and tips. I look forward to the lumber yard one, I haven't quite been brave enough to venture around to find them yet.

[@martinwebb7294]

Angela, Check out 731 Woodworks Hardwood dealer interview. it was posted on 7/8/2021. It is well done, explains all the terms that the hardwood dealers use. I know I will fell more confident when I venture to my local hardwood dealer ( which is the same one that was interviewed ). Steve's channel was the first one I subscribed to on You Tube and I have learned so much from him.

[@angelamarchbanks2621]

@@martinwebb7294 Thank you! Oh me too. Been watching him for a couple years now. Super helpful for all the little things that unless you are working with someone else you may never learn about. He's great. It's always interesting the spots where we hesitate because of feeling intimidated.

[@jetblackbiovuac]

Thanks for this video! I hope you do a follow-up on lumber yards because I found this one really helpful

[@LowVoltage_FPV]

At the store where I usually shop for sheets of plywood, they will cut down a 4'x8' sheet to whatever you like (For me usually a 4x4) at no cost. However you do have to buy the whole sheet. It's an alternative to buying the hobby boards as they are usually 2'x4'. Just make sure that if you need a piece that is a true 4x4 that the cut off piece will be undersize due to the saw kerf. Great video.

[@DevinAK49]

I can't tell you how many embarrassing trips I've made to home depot(my ONLY wood source here) this video would have helped me Immensely. Though I do learned better with experience. Haha. I get a lot of value out of these videos. Thanks.

[@andyb1368]

Good video with useful information. If you are going for sheet goods, particularly the 3/4” thick variety, it is really handy to have a pair of nitrile work gloves. Not only do they protect your hands, but the extra grip afforded by the nitrile makes it a lot less strenuous moving the sheets around.

[@nicksoehren4812]

I’ve been catching up on your videos Steve and I definitely got a story about Home Depot. I was in a building trades class in high school and the teacher sent me and my buddy there to get some plywood. The guy poorly strapped it up on top of my buddy’s suv. Now us being younger and dumber didn’t really know better and thought it would be fine. Let me tell you that it almost went flying off the car at the first stop sign and we called another friend with a pickup to come give us a hand. Definitely an experience I haven’t forgotten nor will ever 😂

[@sfurgas]

Great video for new WW. I always go with my leather gloves and a tape measure. The gloves help grasp the wood and can help prevent splinters.

[@dougpetersen7285]

Thanks Steve! Can’t wait for your video on going to the lumber yard

[@trentthompson2928]

Once again Steve, great job!!! I will drive extra to get to the store that has the saw and employees to cut plywood down.

[@christopherfeld6371]

@Steve Ramsey So, have you ever been to a Menards? They compete with Home Depot and Lowes, but their lumber section is typically more like a traditional lumber yard, in that it's largely outside in sheds, and what lumber is in the main store is farther away from the front. Perhaps the biggest difference from Home Depot (don't know about Lowes, haven't been to one) is that Menards stacks the lumber flat, rather than on end, which I prefer.

[@tylerquarterman8571]

Wonderful! You covered so much here…a lot that would’ve come in handy a year ago! One more tip is that my local Lowe’s has some project panels of various sizes wrapped in plastic. I know it’s more satisfying (and cheaper) to glue up your own panels, but I’ve been pretty happy with them…although I did take off the plastic and let the board acclimate to my shop before use.

[@jasonbauer8147]

Good video. You are correct on the utility cart for 4x8 sheets. If you own a Pacifica or T and C, they were designed to hold a 4x8 sheet inside with all the seats in the sto n go. Probably happenstance but the height of the cart and the height of the van make for a flush push of the material from the cart into the van.

[@MyChevySonic]

I imagine lumber yard is like, ask for one 2x4 and the guy is like, "One pallet, coming up!" No wait.

[@jimp7015]

If you have one in your area, check out the green store. They tend to have a better selection of decent stuff than orange or blue - for wood, anyway - and more variety.

[@dustisamust5602]

Always watch. Always learn. Thanks.

[@ironwood1621]

Also, at HD, I always check the culled lumber cart. If you’re lucky you can find what you need for about 70% off. I usually check couple times a week or if I’m passing a HD in my travels, I’ll stop in to see what they have.

[@mammothfilms]

I came here to share the same. I’ve found some great deals in the culled lumber. This is especially true when I can just trim off the damaged part and get full use out of the rest.

[@andrealavigne7824]

Easy trick for checking out with boards or moulding that don't have a bar code sticker or end label. Snap a photo with your phone of the shelf label for that item. It has the item number on it, as well as the price. Show that to the cashier, & they can enter the item number manually. Also a good way to confirm the price matches what's in their system. I've done that a few times with cut-it-yourself moulding at Home Depot especially, if the piece I cut off didn't have a bar code sticker. I've never had a cashier have problems with doing that. Thanks for all the tips!

[@michaelscholtis440]

Your wood prices are a lot better than what I can get at the same store near me. I’ve mostly been using cull wood and pallets but can’t really get very good final products because I’d really need a jointer to pre-process the wood thus negating the cost savings for MANY MANY projects.

[@Aaron-nj4ou]

I love Home Depot but I never go there for hardwood. Where I live they charge double what the hardwood dealer does and because it was milled long before it went on the shelf it has usually moved a considerable amount. This is even more important because there is nothing left to mill off unless you want something 5/8 or 1/2” thick.

[@rayden54]

I like the cart you used. My big box store doesn't have them. Can't wait to see what your lumber yard experience is like. I'm not sure if mine's typical or not.

[@damionarchibald3734]

This is a great and very helpful video. I'm looking fwd to your lumber yard version as I don't have any experience there.

[@graceland75]

Thanks for all the tips Steve, it was very useful.

[@Erik_The_Viking]

Great tips. I avoid "big box" stores on weekends if at all possible. Also, they often have a morning rush when the contractors are there. Project panels are a great alternative for 4x8 sheets. When you do the video for a "real" lumberyard, discuss the difference between board foot and linear foot prices. Definitely confusing for some.