How to Use a Circular Saw. Everything you need to know. | Woodworking Basics

[@juan3141]

used my new skill to cut my new mattress in half, thanks for all your help!

[@shawn576]

Could it be repaired using flex tape?

[@juan3141]

@@shawn576 madman

[@yuki_eerhs4591]

@@shawn576 could use wood glue and clamps.

[@freddyfriesen]

So does it really have all those special layers of memory foam?

[@dorothyphillips1677]

This made me feel so much more comfortable attempting an upcoming woodworking project. Thank you!

[@TheSevenJr86]

I've been watching at least 2-3 videos a day for the last week. I work everyday (literally) all summer long and get laid off in the winter. I love the videos, I love the enthusiam, you're extremely personable in your videos. It's more like if you had a friend trying to show/explain things to you rather than an instructional video that's dull and lulls you to sleep. I can't wait to see what I find tomorrow on this channel! Thank you for your commitment!

[@spencer82rocks]

I bought my first circular saw yesterday and the air conditioner is up and running because of your best videos,thank you and I appreciate you ,only teaching us the right way to get through project easily and safely. More power to you.

[@Jeremoid]

I took a woodworking course fifteen years ago, worked a little time after that (a year or less), and then moved to work on retail and banking industry. Nowadays i'm setting up my shop at home, for weekend DIY and stuff, and i'm glad to say you inspire me and give me so much confidence on the use of tools and general skills overall, thanks for your channel.

[@immanuelmudjanima2461]

I never attended any woodworking courses. i just leant from the KZbin channels. But i think i am doing well (better) so far, i even have my workshop at home. With this i really appreciate your supports and everythings you guys providing and guiding us through process of skills upgrading. Thank you exporters!!

[@coreygrua3271]

I appreciate SR for taking us all the way down to the foundation of a tool or project. Not knowing (or forgetting) a basic can be a problem for anyone.

[@davevilrock]

You are not just good with wood but also a good teacher

[@rachelbu5534]

These videos are so helpful and encouraging. I currently just have a jig saw and circular saw as you mentioned at the end of this video, and your videos are really helping me use them better as my husband and I turn a former ambulance into a camper. Thank you!

[@asianmikedesigns]

Before making any cuts be sure your blade is perpendicular to your base plate with a speed square. If your budget doesnt allow for any mistakes, you definitely dont want to be several cuts into a piece of wood only to discover your blade is not squared up. Circular saws in general create a lot of dust, how that dust is handled can be a huge factor in determining your purchase. More important is that the dust doesnt go out towards your face. Some will cleverly use the air flow generated by the blade to clear the line ahead of the saw which makes seeing your line much easier. That alone can make or break the purchase of a particular saw; visibility being pretty important with a tool without a set guide.

[@absolutelyloveangels]

You are an excellent communicator and teacher! Love how energetic, no nonsense and straight to the point you videos are. You always give such valuable and clear information in all your uploads👌👌

[@Cantinatollo1]

I own a Skil saw I purchased about 13 years ago. I only used it a few times back when I bought it. I'll be building a workbench in a few weeks. I've already purchased the lumber. Thank you so much for sharing on how to use a saw. This will really help me. Thank you!!

[@bhaskarsubbaraya5935]

Hi, I love and learn a lot from your demonstrations on wood working. I live in Bangalore, India & have thoroughly enjoyed the learning experience, you provide. Thanks a lot & have great time. After seeing your video , I bought a Bosch GKS 190 ROTARY saw cutter & will be putting in to use from tomorrow. I am a retired CEO of a texyiles company & developing wood work as my hobby. Once again my salutations Bhaskar

[@natawata1]

I'm such a newbie I have to keep pausing your videos to see things closer and slower. I can't wait until this tool feels like an extension of my own body. I hate feeling intimidated by power tools! So thank you for your great videos! (You may consider doing a series for Dummies... longer, slower instructional vids... I sometimes wish I could hire a tutor, as I missed the boat with my dad. 😕)

[@jenniferlehman3342]

Thank you! I'm a do-it-yourselfer, but was always a bit afraid of saws. I first bought a jig and now branched to circular. Thank you again!

[@marymadalenem2351]

Wow I'm so excited I found you! I I just retired and and off grid. So I've been using my saws. But the circular saw gives me the greeps..But watching this has encouraged me. Although I successfilly stipped wood today. Thank you so much.

[@henriborsboom]

I have watched this video numerous times while reviewing to buy a circular saw and it has convinced me to get one and the get even more projects going on a tighter budget than expected. Keep up the great video content!

[@richardhanly4446]

Even though I am right handed, I still find it very awkward using the “right handed” circular saw. Simply because I can’t see the blade (unless I lean over the saw which is not ideal). Even when I use the speed square when cutting planks of wood across the grain I’ll still get a crooked cut. I have seen other videos where other wood workers much prefer the the saws with the blade on the left hand side for that exact reason. After watching Steve’s videos very closely, and recently signing up to his weekend projects course, I can really appreciate how super talented and at the the same time how extremely modest he is. I love the way he can distill all of the otherwise “complexities” into easy and simple to understand instructions and make them super accessible for amateur diy’ers like me. But I have also gained a real understanding and respect for the actual skill involved both in wood working and in using all these tools effectively. So the solution to my initial problem (outlined the start of this rant) is practice ! Practice! Practice! There ain’t no shortcuts to success!!

[@Mixwell1983]

I am lefty and the same way. I like right handed saws because the blade is right next to my dominate hand. If you get a cordless or a worm drive style saw you will have the blade on the left side which you can see easier being right handed. It sounds backwards that a right handed saw has the blade closer and easier to see for a lefty and vice versa.

[@anands5661]

so true

[@DavidKirba]

Thanks Steve, I admit I'm new to power tools, but I never thought of using a fence with a circular saw. You're videos are eye opening and inspiring. Thank you!

[@SteveRamsey]

Thank you, David Kirba!

[@brandonmgrezaffi1269]

Once again Steve you have made an excellent video on the description of a powertool. I was in your January course and have nothing but great words about the class. Two of my friends are entering your class because of the work they have seen me do with your course. If you have any doubts about the class PLEASE TAKE IT you will learn a TON of skills no matter what kind of knowledge you have in woodworking. Steve makes it easy and fun! All his tool videos are a excellent resource to watch. Cheers!

[@mariayounger8832]

thank you for not padding or dragging things out. very useful.

[@07ikkin]

Glad I came across this video. I have a kitchen project I want to do. Complete novice. I was scared of getting cut accidentally by the saw but I just learned from you that it has a guard on it 🤦 Thank you!

[@fisherhatakeyama]

Very concise and precise explanation! I think it's time to change my hand saw to circular saw from now on.

[@TheEssexSpurs]

I am going to buy a circular saw this weekend.i love these videos Mr Ramsay especially when you people say aluminium and lever!!!

[@canaldapoeira]

After 2 years of wood working I recently got my first circular saw. I used to make all my straight cuts on the table saw, but que circular saw makes everything easyer. Great video. Hope your course is doing great, but I miss your weekly projects to inspire all woodworkers!

[@bognespava]

I love this comment since I only have a circular saw and I long after a table saw all the time! I love how much room for problem-solving and creativity there is with woodworking. We each develop the way that works for us!

[@peterfido8735]

After 25+years using a circular saw ive now switched over to the festool track saw . Best thing I ever did 😀

[@festushaggen2563]

This was very helpful. As I'm building my tool collection, the circular saw will be my next tool. It's a little intimidating with all the settings but this helps to understand their functions. I'll look forward to trying these out and building some things. Thanks.

[@amariliscatclaw142]

My husband is tired of me asking him to build things for me hahah it's time for me to learn. Ty!

[@Rami7605]

Go girlllllll

[@charlien7866]

Great video. First time using circular saw. Made me confident. Thanks.

[@markhood]

I'm an absolute amateur, and am starting with building some bookcases... This has given me some great tips which have already made life easier!

[@paulolsen4867]

Great to see you working again. I just have one small issue with the tutorial. When supporting the off cut with your hand you should not cross over your hand behind the saw, if it kicks back it can cross over your wrist. It probably can't lope off your hand but can cut through tendons and like.

[@marnas7809]

Tons of woodworking videos on the internet Steve, but yours have taught me the most. Thank you so much, you taught me a lot, keep up the good work.

[@SteveRamsey]

Mar Nas well thanks very much!

[@CLMcIntyre]

Mar Nas....RIGHT???!!!! He's the best!!!

[@defy2598]

his are not the best

[@crystalsoulslayer]

Super informative video, as usual :D My one (1) actual real-life woodworking experience involved a cordless circular saw. They do work, but they chew through battery life like anything. Unless you have a very good reason to, don't go cordless for a circular saw. Literally one evening taught me that. It is _maddening_ having to wait for a battery to charge when you only have a short time to work on something.

[@hectorhernandez1434]

That’s why u own 2 batteries 😬

[@yvesl]

8:15 best tip ever ! Thanks a lot. Just bought a circular saw and spend a hour trying to find a good method for this ! Thanks :D

[@gingerdent]

Great video! Been following your channel for about a month and each one is filled with so many pearls of wisdom!!!

[@MarceloFreitas70]

Very nice tips. Circular saw is one of the basics tools of every workshop. Thank you for sharing this video. Thanks to Casper for sponsoring the show.

[@s4n714g000]

Watched this 2 years ago, got my first saw yesterday so it's time to re-watch it.

[@moopmoop345]

The speed square method makes so much sense wow thanks

[@mishamazureka3486]

I haven't done any woodworking since middle school shop class and recently got started on my first project making a table. I've yet to make a single straight cut but hey, at least I have a table!

[@davidosborne1981]

Great information, the biggest point you covered was not to stand behind the saw, I learned what can happen when last week my saw I have used for years 'kicked back' and opened me up from knee to top of thigh 250mm long with over 40 stitches, just missed the family jewels. .Being left handed I stand on the right side, but not completely as I found out. Now using a walker to get around, Guys be very careful and don't stand behind the saw for any reason.

[@TheJonCapria]

Thank you for making these videos, I have learnt a lot with them and now I'm sharing with my brother who's just starting with woodworking

[@halsonger1317]

I have both corded and cordless circular saws. I find that my Ryobi cordless with a 4Ah lithium battery will do pretty much all of the cutting I need for most jobs short of building a deck. Also, I found it useful to cut a couple of setup blocks from wood scraps that are exactly the distance between the edge of my saw plate and blade for each of my circular saws. That way I can draw the cut line on my plywood and use them to know exactly where to clamp my straight edge for the saw to ride against by clamping a block at each end of the line and snug up my straight edge against the other side of the block. It solves the problem I have of making sure I stay exactly on the line which can be hard to see when sawdust gets all over it.

[@imissmypencils]

When my family asks why I'm so into woodworking now, I'm sorry but I have to blame you, Steve. 🤣🤣🤣🤣🤘🤘🤘

[@KLNYC]

I was holding off for a CS... I was almost got the table saw but no more in my basment. So I got the Craftsman v20 brushless CW.. TY for the video

[@brandiblake6622]

Single mom here, and I just wanted to say thank you for your videos!!!

[@travisd3001]

Nicely done video. Lots of good info concisely presented. I have one clarification. The base plates on your first two saws are probably stamped steel. Fancier plates are cast aluminum or, as you noted, a magnesium alloy.

[@woodworx6410]

You mention towards the end of this video making an upcoming video about straight edges and jigs to (somewhat) turn your circular saw into a table saw. I'm struggling to find that video and could really use the guidance since a table saw isn't quite currently in the budget. Thanks in advanced.

[@basher875]

Like the tip with the speed square against the saw for an accurate cut

[@UncaTuck]

I've been doing DIY projects for years and embarrassingly have never found my circular saw to be my friend. I've tried using the front guides and never been able to hit the line. It never occurred to me to used my speed square on 2x2s. I always tend to get kick back on anything I try to cut no matter what I do so I prefer my table saw and chop saw. I'll try your tips, thanks.

[@joeduffy52]

Signed up for the course today. I downloaded the plans for the BMW a while ago and built it this week. I was thinking, and realised after I'd built it, wouldn't it be easier to attach the shelf cleats to the upright panels first before putting the uprights in? The course is a great value at about 100 Uk pounds, can't wait to get building!

[@scottharmon709]

Joe, I participated in the second class that started in January. I figured out something that made one of the projects a little easier and emailed Steve. It made sense to him, so it was added to the "Graduate Hacks" section of the course.

[@Reddum990]

My Pop Pop made all kinds of things, from clocks, tables, benches. Everyone in our family has something that he made. He was good at his craft. He unfortunately passed away a little over a year ago. My dad received all his tools, which my dad already had a bunch himself. My dad was also good at making things. I have a candle holder he made from back when i was 4. My mom would ask my dad to make her things all the time. Though there was this big garden bench, had a high back. It was something she saw in a magazine. He never got around to it. He didn't think they really had any where to put it, so he didn't really want to do it lol. My dad rip......passed away just shy a year after his dad this past July 19th from a stroke. I've never really made anything out of wood in my life. Now i will be getting all of my dad an pop pops tools. I've been watching a bunch of your videos, im learning a lot an they make me want to make something! I told my mom i'd build that garden bench for her. I just don't know how i'm gonna do it yet! :X I checked out your online course. Definitely something i will have to look into, when things settle down. I feel like things are pointing me to do this. An i want my mom to have her bench, she'd love it. Keep the videos coming, they're helping a lot! Thank you!

[@adamperkins6054]

I have tools I inherited from my father as well, they are treasures to me. In my case, they expanded my existing workshop. If you're intimidated, build something low-pressure, like a little birdhouse. If it looks rough, it doesn't matter. If you need to scrap all your first tries, it was still a learning process. A little hands-on work will show you questions you didn't know to ask, and reveal which tools you feel comfortable with. You can learn this stuff as readily as anybody else, Steve wasn't born knowing all of this.

[@johnedward8352]

My pops passed a year and a half ago. He was really good at woodworking and building too. My older brother spent his entire life being my dad's "shadow", learned about everything my dad knew. I didn't. It's a major regret in my life. I call my brother all the time for advice though and I'm learning as I go. Peace to you

[@jeramiesalundaguit6519]

Very nice sir

[@pollauritsabrahamsenjq1618]

Just start making the bench. If it doesn't work, you can make a second. There is no risk of failure :-)

[@video-carl]

Thanks Steve, very instructive. One tip to remove though... my first extra blade for my mikita 5800 needed to be fitted with the branding hidden so that the teeth were revolving correctly. So I'd not mention branding as behind useful.

[@FyrFytr998]

Great video Steve, but you got it mixed up. The Ryobi and Craftsman have thin stamped steel bases while the Rigid is cast aluminum. You find the cast Magnesium bases on the higher end models and they are much thicker. The magnesium bases are great for stability, but are more brittle than the other two if dropped. And depending on how shallow you are cutting, you can get some flex on the thin steel bases which can mess up making a square cut if you press too hard.

[@fredblair8230]

that was freakin awesome so clear and conise, feels like I just went from newbie to expert in 10mins...

[@loverlyme]

'Position yourself to the side behind the saw instead of directly behind it.' I hadn't thought of that before. It makes good sense. Thanks.

[@HepauDK]

Even though I am a "rightie", I bought a "leftie" saw (Bosch GKS 18V-Li), because with most of the base on the opposite side of what I am cutting off, I have less weight pushing down on the cut-off piece, and as you said, you can see the blade better. Only drawbacks to this saw is that it only supports a maximum of 4AH batteries due to the location of the battery between the handle and the base, and I have to screw off the dust collection nozzle before putting it back in the L-BOXX, or the lid won't close (I might just cut a piece out of the inlay to get it to fit...).

[@el737rs]

Recently purchased a cordless saw. Using it primarily to cut large pieces before they enter the shop, but I find it specially useful for cutting the boards in half in the lumber yard, so I can load them into the car. Oh, and I also use the Styrofoam like in this video, it is by far the best support

[@Tezcax]

I have a circular saw I've been using a lot lately. My tip is to invest in at least two good (bar) clamps and a sturdy workbench. I live in Brazil and work mostly with tropical hardwoods. That stuff is hard, if you're american think about Brazilian Cherry, their density runs around 1.0, while even the densest temperate hardwoods like oak are around 0.7. As such you need to apply a lot of force with your hand to make the cut and you probably need to hold the circular saw with both hands while a strong clamp holds it against the workbench. Even cutting it on saw horses is hard as the saw horses end up moving as you push against the wood. Last month I processed a lot of old fence wood, these tropical hardwoods have a resin inside of them that make them last forever, so I just had to cut the weathered ends and plane to remove the sun darkened exterior. But it was hard with the flimsy workbench and weak clamps I had, the table would move when I pushed the saw against the wood to cut it and the clamps would give up sometimes.

[@davidle7864]

Very very insightful. What's the difference between saw skin and blade skin?

[@joshspeck3703]

The Weekend Woodworker is easily worth the $$. I signed up in January, and even though I haven't finished all of the projects yet (I have two small children that like to nap in the middle of my wood-working time), I absolutely love the course. I highly recommend it, Me-Mos!

[@SteveRamsey]

Josh Speck thanks for saying that, Josh!

[@JohanKnu]

Josh Speck exxcbnmm....loasbnlölhxz,,mjjjjjjjnjbbbbbhhhhhjhbhhhhhhhhhhjhhhghvghhhgghggggggggggggggggggggdfccccccddssssdchkliuiuuuuuuuuuuuuiuuuuuuiijuuuujujjjuuuuuuuuuuuuuuuujuuuuuuuuuuuuuuuuuuuh’

[@davidmiller8634]

Casper is not in Japan. 😥. Shipping costs are sky high these days. By the way, thanks for the circular saw info. The explanation about sawing on a flat surface solved some misunderstanding for me. 👍🏻

[@lesliemctavish4300]

Hi Steve. Thanks for a great video. It's answered all of my questions to get started with my wooden art project which I'm turning into a biz.

[@kristinekoski7345]

I really think you did an awesome job at making this video,,,your really great at talking us through , as your demonstrating ,,also your a great speaker,,,. It really looks like you put some thought in how you wanted this video to be able to help those of us who aren't quite the pro , as you Anyways Thanks

[@tgts]

You're so awesome. I'm just getting into woodworking and you have been my number one resource. Thank you for all you do!

[@kristinaabrio5754]

I love to watch this guy I build my own table by watching from him his so helpful

[@thelowmein9143]

You inspired me Steve to make a crosscut jig for my circular saw. It’s just some trim wood on a piece of thick mdf with two metal rails for the saw to ride on. It’s not much but it’s made making straight accurate cuts a lot easier!

[@elsplace896]

Your video is clear and just what I needed.

[@unitycatalog]

Would you recommend beginners build any of those cross cut jigs for circular saws people have videos on?

[@lisagalindez8606]

Thank you this video gave me the confidence to cut my own wood, appreciated.

[@etiennemarais]

Thank you for the tip about cutting on the ground on a piece of styrofoam. I have been having issues with cross cutting 35cm treated planks where the last 3-4cm of the cut was very skew and the saw kicked back even though I clamped the edges. I started to think I need to test my blade alignment but this makes more sense.

[@richardjessnitz761]

A tip for if you find the saw wandering off your line: Always cut with the narrow side of the base plate against the straight edge. Don't use the wide side against the edge. The reason is that the handle and blade are offset, so when you push the saw, you're introducing a torque to it, you're not pushing it, you're actually turning it. If you butt the wide side of the base plate against the straight edge, the tool will always want to wander away from the straight edge. Butt the narrow side against the straight edge and the saw will automatically want to press itself up against the straight edge, giving you dead accurate cuts at a fraction of the effort. You're making physics work for you.

[@SteveRamsey]

Great suggestion! Thank you!

[@HallowqueenCrafting]

Never thought of that. Thanks!

[@DesandSam]

Richard Jessnitz Now that's some good advice!

[@ebachy]

In addition, the motor sticks out on the wider side of the base and is likely to hit the clamps holding your guide. I didn't hear mention of accounting for the width of the blade when setting the guide. My saw's blade is 1.5 inches from the narrow edge of the base, then depending on the blade, the cut will add 1/8 inch to that. So, you have to think about where you are placing the guide relative to the waste piece after the cut. (Easier to show than to tell! :-) ) Thanks for the great videos!

[@bognespava]

This is a great suggestion and completely counterintuitive to me, just like all the rest of the Physics I made myself study 😁

[@claytonsteele6643]

I’ve been using circular saws since I was about 8 and this is a very good video for new bees!! Also I use a cordless all the time and the batteries now a days last a very long time. My battery one actually seems to have more torque then my old corded one. Great video keep it up!!!!

[@janinelew2483]

I signed up and am loving your classes! I bought my saws!

[@antoniowade3318]

I'm glad I found your website, First time subscriber, thank you for a very informative video. Thank you, Wade Out..

[@ShoHashi]

I always wanted to dive into woodworking but never got around to it. I'm 52, retired now and have plenty of time to learn. Saw your course and decided to hop in for the ride! It will give me something to do! Great video!

[@SteveRamsey]

Awesome! Glad to have you on board! You are going to have a blast.

[@SEBTECHDIY]

Im 30 and still learning alot with Steve Videos!! Lots of useful tips !!

[@ouaisetalors]

You won’t regret taking the course. It’s really great

[@hogue3666]

How do you retire at 52?

[@Laffy1345]

chris hogan go to the military do 20 years or get medically discharged. I retired after 24+ years. I retired at 52, because of getting wounded in iraq..in 2006.

[@romeotango5597]

After building a fair length of fence at my grandparents with tools borrowed from my dad and grandfather, I'm envious of that rigid. The circular saw I had to use had a warped base plate, old blade, and innacurate, difficult adjustments. Safe to say none of the cuts were pretty nor easy, although I should have listened to my intuition regarding the speed square which for some reason I only used to mark cuts and the like. I definitely will be picking up a nice circular saw when i get the chance!

[@Jb-Raja]

Missed you very much Steve. I have learnt a ton from your videos but mostly why not to be afraid to start woodworking past 50 years of age. God bless you.

[@DerekElliott-qn2kz]

Thank you for an informative video-one question from a beginner-If you have for example a 165mm saw, can you use a slightly smaller blade size, eg a 160mm blade?

[@Nourmali]

Tak!

[@CETChris]

Steve, I appreciate this video. It has been very helpful. I am limited to doing my work on the back porch with only a circular saw, jigsaw, drills, and some basic hand tools. Would you be willing to create a video that shows some type of table structure that would allow us to get more use from a circular saw when having a table saw is not an option? I've seen video's where people use track saws and have kind of a "skeleton" workbench setup. This would enable me to clamp better, use my home made track better, and allow me to work in the front yard instead of being limited on space on a back porch. The insulation idea is nice but not for me. I have no flat concrete surface to work on, and clamping is necessary for me. I wish there was a way to show you a short video and pictures to better show you what I am working with.

[@anneoreilly4900]

I borrowed this idea: create two L shaped brackets with 1x2s. Mine are 18" long. Screw them into your table top experimenting with the distance apart. You can then saw between them or to one side. Or screw a piece of plywood into both to create a surface you can clamp onto. Or, secure the piece your cutting with screws. Wish I could remember the you tubers name!

[@MartinBgelund]

Great advice on using the insolation foam as a base, and cutting your wood on the ground. Thanks!

[@MTEXX]

it's very nice when making a big mixed batch of rip and crosscut alternations with a circ saw

[@twinklinglicin]

nice vid! covered all the best points. very anxious to see the mentioned upcoming vid about straight edges. i many times use a long metal measuring stick, but would like something more pronounced. i'd rather not, however, spend $50 per 4' chunk of the clamp fence.

[@judymcdonald7815]

Thank you for answering my questions so clearly. One of the best videos I found.

[@aerozy6167]

had an interview today for pre con. learning alot from these videos to know what to expect when making molds for the concrete. also learning table saw :)

[@DrDingus]

If I don't have any saws yet, and I plan to be making some shelving with plywood as well as needing to cut a bit of paneling and wood for exterior home repair, would you recommend I invest in a good table saw, miter saw, or circular saw first? I would like to eventually get into more woodwork since I just bought a house that needs some repair and I would like to build some pieces and furniture myself, such as a large wine rack and shelves for my bar just to name a few. I was looking at the ~$1000 Grizzly table saw. I figure if I invest in something solid that will last, I won't have to worry about it for a while and it might be better than having a mediocre miter saw, mediocre table saw, and cheap circular saw. Well.. circular saws are so cheap, I could get the Grizzly and a cheap circular saw and then maybe hold off on the miter saw to see if I still even need one. Let me know what you think! Thanks for the info!

[@MrBlackdragon1230]

How about a video on oscillating multi-tools? They seem like one of the most versatile wood working tools available.

[@febiirabbit3429]

Thank you for this, I bought a circular saw for my dad because we only have the manual type. Now I know what else to buy to help keep up with the drawn line on the wood.

[@xmnemonic]

Thoughts on using a 6 ½" circ saw? Would it hold me back as a beginner? Most of the cordless ones are this size and I like how they are lighter.

[@jennifersmith8900]

i'm excited i'm getting a circular saw tomorrow and at a decent price! battery charger and saw for 50 bucks brand new! so i'm hyped!

[@nathanrocks2562]

That speed square as an edge guide is the golden ticket.

[@asdprojects6235]

Great video. I just start woodworking and your channel is really helpful. I plan to sacrifice one plywood instead of using styrofoam.

[@sarahxknits]

Thank you for finally answering my questions. Hard to not get sarcastic and patronizing answers from men in real life.

[@nonplayablecharacter4815]

Is this a joke

[@sarahxknits]

Non Playable Character is my comment a joke? unfortunately, it’s not!

[@gringochucha]

@@nonplayablecharacter4815 I've seen it happen in all areas of life. A female colleague will ask a guy something and not get a decent answer. I'll ask the exact same thing and immediately get the info I need. I can only imagine how much of a pain in the ass this is if you're a woman building shit and dealing with the guys at home depot or whatever.

[@FA-ft9sq]

I'm not a woman but im a small and short guy (im in my mid 30s but people assume I'm just in my early 20s. People don't give me the straight answer when I ask stuff about building things, they just assume I'm not up for it and just tell me 'just buy it from Ikea'. So yeah I can totally relate.

[@johnesaling]

Thankyou so much! I learned so much information from your video. You covered alot!!!

[@dashcammer4322]

Buy a saw with an automatic blade BRAKE, so that it stops the spinning blade almost instantly when the trigger is released.

[@rkfarmranch8214]

Can you mention some manufacturers that make a saw that has an automatic BRAKE? It sounds like a very great safe idea. Thank you.

[@steeve-shaunfabre6918]

What about track saws? How do they compare to circular saws and do they have some advantages over them? Or is it the other way around?

[@janinelew2483]

Perfect timing with this video! I'm new to woodworking and was thinking about buying a circular saw today until I get a table saw. I want to take your classes. Thank you!

[@theonlyalan731]

The blade guide does not always spring back closed. Particularly on older worn out saws or cheaply-made saws. I personally never take it for granted and check to see that the blade guard is indeed closed before setting down the saw. Most of the time though, I just wait for the saw to stop spinning before setting it down.

Congratulations! You have a really amazing channel. I feel like i´ve learned so much with just a few of your videos.

[@nicolekulawski4878]

Could you share more information on the clamp level and where to buy?

[@markh.2899]

My dad had a Craftsman radial arm saw that ran the table and came one inch from my hand - I'll never forget that day!

[@mrkashman0596]

Mark H. Did u nearly cut your hand or something

[@markh.2899]

@@mrkashman0596 Yep, I lowered the saw blade (I was actually screwing around with it cutting wood pieces) and it reached the table. I didn't have my other hand on the grip - the saw took off and came just short of my hand. I was a dumb 12-year old learning a lesson...

[@mrkashman0596]

K thanks for explaining

[@DAVIDSMITH-jh5np]

What is the best saw for cutting a pre-formed laminate counter top, circular saw or table saw? Love your show!