280z Windshield and Hatch Glass Install

  Рет қаралды 11,678

Stewart Motoring

Stewart Motoring

Күн бұрын

Пікірлер: 44
@jyaj007
@jyaj007 5 жыл бұрын
ladies who help build cars with you are keepers for LIFE... haha
@fasteddie9475
@fasteddie9475 3 жыл бұрын
Enjoyed your video, great to see your wife helping, My wife and I put windshield in after heating rubber seal in warm water and installing using rope trick but applied liquid dish soap around seal when installing and went in real easy, just my two cents. Keep up the good work!
@StewartMotoring
@StewartMotoring 3 жыл бұрын
Oh that is a good idea. I have to take the windshield and the rear hatch glass out to paint the car soon. So I’ll give your prep method a try. Sounds like it’ll work better.
@craigwoodfolk3240
@craigwoodfolk3240 5 жыл бұрын
Another outstanding job. Unlike some others, I appreciate seeing all the effort, frustration and persistence required to complete these tasks. Everything on KZbin looks straightforward until you try tackling them yourself. Again, thanks for sharing your project experiences.
@StewartMotoring
@StewartMotoring 5 жыл бұрын
Thanks for the great comment!
@Photobombin
@Photobombin 5 жыл бұрын
Looks good man. I just pulled my windshield. My car is completely gutted and the floors... well basically the trans tunnel and rocker were the only things holding my seat in so I've been watching your old floor pan and frame rail videos. About to start cutting mine.
@StewartMotoring
@StewartMotoring 5 жыл бұрын
That's awesome. Yep, I was doing those same things about 2 years ago now. Wow crazy. Glad they help. Ha my editing has gotten better since then :)
@Photobombin
@Photobombin 5 жыл бұрын
@@StewartMotoring I've been watching your build since the beginning since before I bought mine. I don't always comment but I watch them all. Everything has come a long way for you man, editing, fabricating & everything in between. It's been fun watching the journey. Can't wait to see video of you ripping in this thing.
@StewartMotoring
@StewartMotoring 5 жыл бұрын
@@Photobombin for sure, that'll be coming very soon!
@ShadeTreeGarage
@ShadeTreeGarage 5 жыл бұрын
This car is a beast man! Cant wait to see this! Awesome job!
@StewartMotoring
@StewartMotoring 5 жыл бұрын
Shade Tree Garage thanks! I watched your 240sx speedo fix video and it worked!! Reflowed the joints and boom. Cause I have an s13 too (:
@tallnrough68
@tallnrough68 5 жыл бұрын
When you put the trim mounding in it pushes out the rubber corners and fits like a glove. Had the same issue with mine and then added the SS trim it worked out just fine
@StewartMotoring
@StewartMotoring 5 жыл бұрын
Randy Robinson that would be nice, but idk that I want to put the trim in ha. I probably should
@jamesf9492
@jamesf9492 3 жыл бұрын
@@StewartMotoring If you don't want the groove for the chrome channeling, take a look at Vintage Rubber CAL Spec weather-stripping for the windshield and hatch seals.
@joeldoodnath9473
@joeldoodnath9473 3 жыл бұрын
Hi guys great information on the window install, this will defiantly help me on my install. Thanks a lot. by the way, can an you please share where you sourced the fender flares for you car???
@StewartMotoring
@StewartMotoring 3 жыл бұрын
Thanks. For the flares - trial and error eBay flares. Tried a couple sets till I found those
@hassanmalik5975
@hassanmalik5975 5 жыл бұрын
Bro I like your rear spoiler 👌from where can I get like them for 240 thanks 👍
@Drew_P_Bahlz
@Drew_P_Bahlz 5 жыл бұрын
Nice work brother! Looking good!
@diamoniquesmith9301
@diamoniquesmith9301 5 жыл бұрын
Looks good bro bro but dont you need to add that glue stuff so windows wont fly out
@StewartMotoring
@StewartMotoring 5 жыл бұрын
Thanks. Modern cars use the glue to hold them in. This car uses only the rubber trim by design it holds it in place.
@Oblithian
@Oblithian 5 жыл бұрын
@@StewartMotoring mine had both
@michaelc2056
@michaelc2056 5 жыл бұрын
Hey man I didn't see this when you first posted it, but you might end up filling those gaps when you put back the trim pieces. It might spread the rubber far enough where you don't have to mess around with filling it with sealer. If you could let me know how it works because I am restoring a 280Z myself and hope I don't run into the same problem .
@PotatosPotatoes
@PotatosPotatoes 4 жыл бұрын
Buy the genuine Nissan seals. Trust me on this.
@likablemichael
@likablemichael 5 жыл бұрын
Definitely not looking forward to doing this to my 280zx! I'ts nice to have this video for reference!
@MrStreet69
@MrStreet69 2 жыл бұрын
No glue actually holds the glass windshield in place ?
@StewartMotoring
@StewartMotoring 2 жыл бұрын
Nope!
@kirkgreenman1386
@kirkgreenman1386 11 ай бұрын
Where did you buy the rear strut tower brace?
@StewartMotoring
@StewartMotoring 11 ай бұрын
The tube between the rear strut towers I added myself
@PotatosPotatoes
@PotatosPotatoes 4 жыл бұрын
For anyone that is looking at getting a new hatch seal...BUY THE NISSAN OEM PART. Seriously. You will have issues with the fitment of any other seal. I know from experience and $150 down the drain on the cheap option.
@harrish1978
@harrish1978 4 күн бұрын
I'm impressed. That you got a woman who helps you out.
@Simb-l
@Simb-l 5 жыл бұрын
Isn’t there filler strips/trim that go in the rubber afterward?
@StewartMotoring
@StewartMotoring 5 жыл бұрын
Simeon Boys-Layton yes, the it has provisions for the chrome trim. I will be installing later. If I do decide to install. Because I am missing some trim...
@sero143
@sero143 5 жыл бұрын
Nice vid! Did you purchase the complete rubber kit for the 280z?
@StewartMotoring
@StewartMotoring 5 жыл бұрын
Yep, 19 pieces. I said Summit in video but it was actually an Ebay seller!
@yobentley7274
@yobentley7274 5 жыл бұрын
nice work.
@jarretpaul
@jarretpaul 5 жыл бұрын
Am I seeing things or are your wheel studs stupid long?
@StewartMotoring
@StewartMotoring 5 жыл бұрын
They are arp studs that are a bit extended. They don’t stick out that far. It does help putting the wheels on though 😁
@seriogamarkovas5407
@seriogamarkovas5407 5 жыл бұрын
Starting to look like a car now eheh! :P
@punkbloater
@punkbloater 5 жыл бұрын
That looks factry... ...remember the build and finnish quality in the 70”s was not 100% so this is probably factory spec. 👍🏻
@TRUTH4U2NO
@TRUTH4U2NO 3 жыл бұрын
Marry that woman. lol
@TRUTH4U2NO
@TRUTH4U2NO 4 жыл бұрын
S30 never look good primer or matte or satin etc...Paint that bad boy.
The Best Datsun Rear End Setup?  FutoFab Axles and Stubs!
30:10
Windows Down
Рет қаралды 13 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
How to PROPERLY Replace a Rear Windshield (No Special Tools DIY)
34:59
Installing New HID Headlight kit for the Datsun 280z!
17:36
Stewart Motoring
Рет қаралды 10 М.
How to Install Rear Hatch weather stripping
21:19
Travis H
Рет қаралды 4 М.
Paul Newman’s Datsun 280ZX: An American Legend From Japan
9:17
Petrolicious
Рет қаралды 230 М.
Skillard's Datsun Door Window Rubber Wipe Kit Installation
14:53
Skillard Automotive
Рет қаралды 10 М.
rear-end installation Datsun 280Z
12:14
Travis H
Рет қаралды 7 М.
280z Gets Big Brakes all around + Brake Booster Delete!
19:58
Stewart Motoring
Рет қаралды 23 М.
Removing Wire Harness and Dashboard on the 280zx
14:00
NAWAL
Рет қаралды 2,2 М.