Remember the Kamikaze method on the Xbox 360 Liteon DVD Drives? Edit: Yep, he talks about it. I still have the template lying around. I remember using a soldering iron to Kamikaze. Such fun
@427cidpower3 ай бұрын
Back in the day the kamikaze mod had small jigs that would precisely say where to grind, (drill) I think you could probably achieve the same thing with a 3D printed jig using the the shield and those small components above as a guide 🤔
@thecyberquake6182 ай бұрын
Honestly a jig wouldn't really help here as the hard part isn't where to grind, just how deep. Location doesn't have to be hyper-accurate, hence we can scrape down a square in the general area of the dat0 through 2 layers, and then the 3 layer is easy to see dat0 with some alcohol on it.
@gmorb66619 күн бұрын
@thecyberquake618 Yeah if you have experience with scraping u can get by with a razor blade.
@GigaTronic5013 ай бұрын
Thank you for this updated guideline. Pretty well done with introducing which material you are using. What I can say is that it looks easier than it is 😁
@ntdh29652 ай бұрын
The most important man by far for us. thank you for everything
@sthetixofficial2 ай бұрын
you are welcome
@MIDNITE693 ай бұрын
Although my dat0 connection has been solid for a long time, I'm certainly going to be updating the install using this method! Thank you!
@rockapartie2 ай бұрын
Never change a running system!
@myriadtechrepair11916 күн бұрын
@@rockapartie I agree, even though mine is using the Kamikaze
@psyopsmatter64803 ай бұрын
your videos are the most detailed and in-depth on youtube love your work has help me in a lot of consoles
@sthetixofficial3 ай бұрын
Glad to hear!
@CuriousTinkering3 ай бұрын
You make it look so easy. 💯
@izan14142 ай бұрын
i found this very fascinating,all of this knowledge,hardwork,just to have freedom on our switch like doing OC,download tons of games for free,customize,modding etc..kudos👍👍 for those expert on doing the hardware section,without you guys i can't play 60fps on my oled switch😅..have a great day and god bless you all😇
@rohansharma89563 ай бұрын
The Goat
@DaOptimus13 ай бұрын
Once again, amazing work.
@sthetixofficial3 ай бұрын
thank you
@joesalgadSF4152 ай бұрын
I remember doing the kamikaze on the LiteOn on the Xbox 360 just drilling very slowly. I had a little jig and template to make a little easier.
@Beezid302 ай бұрын
i have been using "Model Scriber" instead of the grinder pen. i did have to sand and sharpen it because the edge was jigit and pitted but once i got it sharp it been doing a great job.
@user-ox7pb5us5g2 ай бұрын
This is insane! You’re the best, Sthethix! I’ll leave this one to you. 😅
@sthetixofficial2 ай бұрын
Thank you
@bonkomh20183 ай бұрын
You do a wonderful job 👍🏻👍🏻
@sthetixofficial3 ай бұрын
thank you
@xAlastorBx2 ай бұрын
just amazing, im goona do it and will succeed!!!!
@walterwallace95033 ай бұрын
Master piece 👏👏👏
@whoswho44983 ай бұрын
feels like you need nerves of steel to do this method
@329salamander3 ай бұрын
excelent video and explanation ! thanks
@ottoplichters3 ай бұрын
Thx for the information
@sthetixofficial2 ай бұрын
you are welcome
@SANKSANK10002 ай бұрын
Gilak.. rapi bener kek ada bingkai di tiap layer nya.. 😅
@javieraleman29893 ай бұрын
Just amazing! I have the equipment and I feel like I have the skill but its intimidating plus I’ve never had an issue with the dat0 adapters. Will have to find a dead board to practice on
@Techh0bbyist_Shop3 ай бұрын
You could try on other dead boards like v1 v2 or Lite, to reach 3rd layer
@rockapartie2 ай бұрын
I'm usually the "no risk no fun" kinda guy when it comes to modding, soldering or repairing stuff, but this is one mod I'd never attempt to do on a working system without prior practice.
@EdgyEmoLoliconBoy3 ай бұрын
The best way for me
@_MJ07_3 ай бұрын
I think I'm going to try this. I've had to adjust my dat0 adaptor so many times.
@rockapartie2 ай бұрын
Which adapter did you use? And did you play games featuring a lot of rumble in handheld mode?
@_MJ07_2 ай бұрын
@@rockapartieI've used the gold full sized one and the little black corner only adaptor. I've had my rumble turned off for some time now, so doubt that is an influence.
@rockapartie2 ай бұрын
@@_MJ07_ Thanks for the reply. Mine's still working fine (knock on wood), but every time I have to reboot, I'm always like: "Please work, please work!", and that's slowly getting on my nerves. 🙃
@dgm7783 ай бұрын
Beautiful job
@jacobtc2 ай бұрын
Why would a reball start cracking over time? I've been reballing severeal OLED's with leaded solder balls, placing a 0.1mm wire on the DAT0 point, and have not had any failures yet. Reballing IC's have been done since the dawn of man, and I've never heard of them cracking?
@sthetixofficial2 ай бұрын
i did reball other consoles too and never had any issue, but this one , i feel a bit different. even a very tough guy here on my country said, the solder ball could potentially get crack someday.
@antonwestin54642 ай бұрын
@@sthetixofficial reball with leaded solder (wick away the unleaded solder) and there is no issue. Calling it "unreliable" is simply misleading - any method is unreliable if you execute it badly. People assume you know what you are talking about so I would suggest thinking twice before claiming things you aren't certain about
@cabuzzi2 ай бұрын
@@antonwestin5464There is also the heat issue. Outside of how hard it is to solder on such a small spot (for me, not you pros), this seems like a great method that doesn't bother the chip.
@ducktechvca3 ай бұрын
Man, what a sensational video, best explanation of the method. where can I find these Oled boardviewer and other board models, which program are you using?
@sthetixofficial3 ай бұрын
global.wmdang.com/index/index/introduce/inviter/320267.html Thank you. you can open that link
@ducktechvca3 ай бұрын
@@sthetixofficial thank you so much👏🏻😍
@hamidmohammad5097Ай бұрын
Thank you for your effort. The question is, which is better, copper-plated or aluminum-coated wire for performance?
@chadwolf38403 ай бұрын
Damn bro you got skill
@hamidmohammad50972 ай бұрын
Thank you for these wonderful instructions, my friend. I have a question. What is the difference between ma ant d1 and d2? Between ma ant d2 it is easier and faster to change the heads. Thank you.
@sthetixofficial2 ай бұрын
D2 has no battery inside.
@luigigadaleta67882 ай бұрын
I did a lot of kamikazes on Liteons, but it was a much easier matter. here the difficulty is not so much the exposure of the DAT0 but welding it correctly without touching the layers, it reminds me of the film Maverick where he had to hit the mark with a shot in the crater 🤣
@semihdemir61042 ай бұрын
Great video! Will there be a separate video about the v6s chip featuring the flashing via the usb connector in the future?
@sthetixofficial2 ай бұрын
there won't be a thing because flashing via the usb connector has a bug, and I don't recommend connecting the d+ d- and the vbus
@semihdemir61042 ай бұрын
@@sthetixofficial alright! Will there be any content about the trinket m0 with fusee suite for unpatched v1 switches? The newer versions of the x86 from aliexpress don't have flashing options and mine also corrupted my sd card once i tried to move files over. The general quality of these chips became pretty lackluster. The trinket works flawlessly
@sthetixofficial2 ай бұрын
@semihdemir6104 I don't have trinkets, so I cannot guarantee I will make that video. mine using the older rcmx86 and it is flawless
@mohdfaizal29533 ай бұрын
Mantab gan 👍expert ✅
@Busser_King2 ай бұрын
Hey Mr stethix My new 3ds xl top screen won't work for normal applications as well as the home screen. But does work for the cfw apps. What do I do?
@sthetixofficial2 ай бұрын
please ask at discord.gg/MWxPgEp
@ogiesloogus377422 күн бұрын
Heh just bought a console from you, I tried but could not do it well, I preformed the kamakazi correctly and pretty good, but soldering to it was hard and I blue that resistor right next to it.
@sthetixofficial21 күн бұрын
you need to replace that resistor
@Sufiley2 ай бұрын
almost 100kk
@gamblerofrats3 ай бұрын
Is there any specific reason why your initial grinding 'square' is bigger than your last tutorial? And many thanks for the update
@sthetixofficial3 ай бұрын
for me, is just a "flavor", to make the grinding easier
@gamblerofrats2 ай бұрын
@@sthetixofficial After plenty of research, I followed your guide and successfully performed the kamikaze for the first time yesterday. Thank you for all your work in the modding scene and active support, I couldn't have done it without your clear guidance.
@sthetixofficial2 ай бұрын
congratulations, you have acquired a new skill now
@imamalox3 ай бұрын
Curious, is this the method you use for each install now? I'm a chip installer and tempted to Switch to this method
@sthetixofficial3 ай бұрын
yes I always do kamikaze for all Oled modding
@GiuseppeFregiato3 ай бұрын
Wonderful video you are the best. Where you can find grinder head? It's possible to share some link?
@sthetixofficial3 ай бұрын
it is included inside the ma-ant d1
@GiuseppeFregiato3 ай бұрын
@@sthetixofficial ok but if you want to buy another One, where you can find It?
@sthetixofficial3 ай бұрын
@GiuseppeFregiato this www.diyfixtool.com/products/maant-d1-intelligent-usb-grinding-pen-charging-engraving-pen?variant=44366834729189
@GiuseppeFregiato3 ай бұрын
@@sthetixofficial great thanks
@LCDLCD-cl2qp2 ай бұрын
I prefer make a reflow with flex nand , but one day I need try this for fun
@georgekiller552 ай бұрын
Really nice method, i have done similar repairs using an scalpel #11, with the mini dremel tool i feel like im going to mess it up. btw, is this method only viable on the OLED? or the 1.1 and lite have points too?
@sthetixofficial2 ай бұрын
it is for the OLED only, as the other variants have exposed solder pad.
@hitechmaster692 ай бұрын
Hi dear, it would be nice to see the measurements with a millimeter close, so it would be much easier not to make mistakes with another very close point... You have a small millimeter to see the measurements from the dat0 point to the 4.7k resistor and also up vertically towards the metal shell? Hello dear, good luck 👍🏻🔝🔝🔝
@sthetixofficial2 ай бұрын
to be honest, I don't measure it because of the experience 😉
@hitechmaster692 ай бұрын
Hi dear, I didn't mean for you, we know how to do it, but those who don't know how to do it if they had exact measurements on that point, they couldn't at least make a mistake with a closer point, I use a professional mini dentist drill, a very expensive kit, because the DM 1, the DM 2, or other Chinese ones, can break or vibrate too much, as I am an old technician, I only say this because I don't make videos here, but I would like you, who are very good at many things, to be the first to show that too, this is not a criticism, of course my friend, it's just a piece of advice in my simple opinion to be more complete in the explanation, which in any case I personally consider equally fantastic as you did this Kamikaze.... Continue like this , for many of us you always remain one of the best, it's not a compliment, it's what I think, but many people think the way I think it, and we both know this well... 😉 Warm greetings from HiTechMaster Italia. Hi Sthetix 👍🏻🔝🔝🔝🔝🔝🔝
@sthetixofficial2 ай бұрын
@hitechmaster69 no bro, you need to try it and follow the video or watch the previous kamikaze method.. as for me, I didn't measure it, and I don't see any reason to measure it for public too
@hitechmaster692 ай бұрын
@@sthetixofficial Yes, in fact, what I said was in fact just my idea, I would have liked to see you do it, the rest doesn't matter... Hello dear, keep going, you always learn new things in life, we just have to try to always improve... The rest is history... 😉👍🏻🔝🔝🔝
@sthetixofficial2 ай бұрын
@hitechmaster69 thank you
@itechconsole2 ай бұрын
Correct me if I'm wrong but not all versions of OLED motherboards are compatible with the kamikaze dat0 point ?
@imamaloxАй бұрын
Wrong, all versions have the same board layout at this area
@H.O.79Ай бұрын
13:37 why do you use solder paste? Can you not solder the wire directly on the pad?
@sthetixofficialАй бұрын
too big., cannot.
@MrCANER063 ай бұрын
Great video again by the modding KING. Does the size of the EMUMMC matter when I partition it in Hekate ? Lets say I wanna use a fresh microSD card on my modded OLED and wanna set it up from scratch. Can I set up the EMUMMC as low as possible or does it need a minimum size ?
@sthetixofficial2 ай бұрын
12GB is ideal but if you want to maximize it, you can slide it to 58GB full
@carlosnorbertosuarez2 ай бұрын
Well, could you show a little more of the two lines, like the data 0 and the one next to it, I received a switch with both lines short, I managed to find them, but this is not the point to communicate them.
@sthetixofficial2 ай бұрын
you need to subscribe to the xzz to find it out
@rchaze3 ай бұрын
the 40 awg teflon wire threw me. i ordered 36 awg as for all wiring. is this only for the dat0.or is the 40 awg now suitable for all wiring? i used old micro quadcopter wires they gotta be 34 or 36 however i could not replace the shield after installing the dat0 adapter through the corner as the wire shield was to thick had to notch it a bit. just ordered 36 awg. i can always cut a few strands for this method. if 36 awg is still recommended for all other wiring.? anyways thank you for all that you do!!!!
@sthetixofficial2 ай бұрын
36 is still ok. I used 40 because the 3rd layer is deeper than the surface and I need flexibility to access that area, and I found it it easier using the awg40
@Gabo99Ай бұрын
Grinding is easy for me, the hardest part to me is tinning the dat0 point 😭, any tips for me? I have been using a low melt soldering paste, but tinning that point is so hard, my iron temperature is 300°c
@imamaloxАй бұрын
Bit of a late reply but I used hot air instead of an iron with soldering paste. Worked a lot better for me personally
@Gabo99Ай бұрын
@@imamalox What temperature and airflow? And how long does it melt and stick to the dat0 point?
@ogiesloogus377421 күн бұрын
Do you think you could use a hot plate to solder the kamakazi data-0 trace?
@sthetixofficial21 күн бұрын
how? I don't get it. you mean heating the emmc then slowly move the dat0? the thing is you might end up damaging the balls and the lcd socket
@consolemods3271Ай бұрын
Really good idea,, but risk 2 high for me..
@pvim2 ай бұрын
shouldn't you add a thin piece of copper wire or at least tin the 1st and the 2nd layer since you you significantly reduced the trace width for the 1st and 2nd layer via grinding, it might become a faliure point.
@sthetixofficial2 ай бұрын
i am sorry i dont understand what you mean about the copper wire. we dont need it as they are all ground signals. I opened the "square" to make the dat0 point more visible later.
@pvim2 ай бұрын
@@sthetixofficial i mean that you made the ground trace significantly thinner by grinding it, after you soldered the dat0 wire it would have been a good idea to add a small piece of wire to the ground trace, or to tin it to strengthen it a bit.
@sthetixofficial2 ай бұрын
@pvim no we don't need it as the whole board is a mass piece of ground signal.
@BlizzardBurrrАй бұрын
I’m getting purple screen every time I power my system on. What is the issue?
@sthetixofficialАй бұрын
probably your console nand is damaged
@clonblurmin81942 ай бұрын
Out of curiosity, why do you opt for solder paste for the dat0?
@sthetixofficial2 ай бұрын
because the solder wire cannot access that tiny area.
@clonblurmin81942 ай бұрын
@@sthetixofficial good to know, thank you for the response
@CarlosSilva-vk4ck2 ай бұрын
What microscope do u recomend? I did whit mine but i cant see what im doing…
@sthetixofficial2 ай бұрын
I used eakins microscope.
@houwentien75293 ай бұрын
sorry i watch both your videos but what is the difference between the method for this and your last video?
@sthetixofficial2 ай бұрын
same concept but different method to secure the wire.
@samyhx8962 ай бұрын
I still use the Latest Dat0 adapter but I never had an issue. Are you saying that eventually it will stop working ?
@semihdemir61042 ай бұрын
It's the most frequent issue with modded OLED consoles
@ItsWarmist2 ай бұрын
Because Installers not knowing how to properly secure dat 0 without heat and emmc chips breaking because of it , this method was created but dat 0 is reliable if you know how to install it properly not need to damage the board. more than 2 years installing dat 0 with no heat and never failing.
@martinj8172 ай бұрын
what tutorial is the best to mod a V1 switch and V2? thanks!
@sthetixofficial2 ай бұрын
same guide, V1 unpatched use kzbin.info/www/bejne/laeQk3qGqbqLhc0si=HO6zX3zxtMGvWgNL and later usekzbin.info/www/bejne/q6HCpJ2wgK15m7csi=2qp2hRmoQfW51433 for both consoles
@user-yk1cw8im4h2 ай бұрын
Is there anyway to fix the trace if I grinded away the layer you are supposed to solder to?
@sthetixofficial2 ай бұрын
you need to grind the other part of the motherboard. please watch the boardview section.
@user-yk1cw8im4h2 ай бұрын
@@sthetixofficial the trace is broken as I grinded that layer away, will the console still work?
@sthetixofficial2 ай бұрын
@user-yk1cw8im4h it wont
@AlexPebodyGM3 ай бұрын
Thx for video. KAMIKAZE METHOD is still risky.... I think resolder eMMC chip better. IMHO.
@mohandmohand20472 ай бұрын
Any telegram chanal can msg you boss???
@sthetixofficial2 ай бұрын
no channel.
@user-bw5hk5nb3k2 ай бұрын
Never do it again, its dangerous and 99% destroyable !