STI/WRX Side Skirt Installation (Side Under Spoiler)

[@xrateplaya]

I really hope they pay u for these vids. U help me out so much with my installs..used to be so intimidated

[@brianmiller5074]

As with the other comments you do a great job in explaining the process. It is very intimidating to get a new car and start removing stuff and drilling holes into it. You show the steps in such a way it breeds confidence into the less confident. Well done keep up the great work.

[@dharp7831]

Imagine drilling holes in your trunk for a spoiler talk about nerve racking 😮‍💨 but it went well but definitely scary to really do after thinking it through and making an install happen is one of the best feelings

[@ezevas]

Great video my man. I appreciate you taking the time to make these detailed install videos that save us time and help us avoid costly mistakes 🙏

[@paulmarsdensr1095]

A great side skirt installation brother. Subies forever.

[@pogtuber5146]

Awesome tutorial. I don't have templates for my side skirts but I think I'm going to remove the rocker panels just so I'm not working on my back and have more control over placing the skirt and drilling in the screws. Great tip on using the electrical tape since it's not obvious that you can drill right through and up into the side of the panel. Only thing I would add which I saw in another video is that those rocker clips that go into the body have pieces of foam (to prevent rattling) and it's easy for them to fall off, check to make sure you have all of them on before installing the panel back onto the car. Also I see what you mean about strong horizontal lines but it looks great.

[@christos881]

Looks good, matches and flows well with your front black lip spoiler...

[@paulmarsdensr1095]

I'm going to get prices for these components today @Irvine Subaru today. A great video brother. Take care and I really wished Subaru made a VB STI.

[@6ix418]

Traded my 18 sti for a 21 sti. And I'm glad I found this. I'm buying the whole kit Tomorrow. Thanks for the videos you put up good job

[@alberttovar]

Installed my front lip and side skirts with the help of your video. Thanks bro. 2020 STI. ✌🏼

[@paulmarsdensr1095]

The front lip, and side skirts make the STI look really good. 😊I have a world 🌎 Rally Blue Bluebaru STI. I got that name from Smeedia. 😊

[@andycheek766]

Thank you for this video this is the next step in upgrading my car and I think using Subaru components wherever possible doesn't take away from the value of the vehicle

[@ricerckt]

Very nice video, man. I’ve been dreading taking off the side skirts of my STI. You’ve definitely put my hesitation to rest.

[@NiceGuyYoutube]

Moldings are there to protect from those door dings. they saved my door once and i was glad it was there.

[@zachburkhart9567]

Great video! Only thing I did different was after install I noticed small pebbles getting trapped in the area where small push pin is located in rear wheel well. I grabbed some thin all-weather single sided foam tape and applied it to area where skirt rests to keep debri out and prevent paint damage (sti should have ran that thin rubber all the way around that corner imo). Actually referenced this video for install as the site for instructions wouldn't load so thank you for the help!

[@TheJasbmx]

Looks good it adds a clean look not to racer will be doing this to mine . Thanks for the video.

[@leowashington8991]

Wish they have a Video like this for Lexus GSF

[@CompSciGuy2]

Love the tutorial: very well laid out and great explanation.

[@kristennizzaro7305]

So helpful, doing mine tomorrow. Vehicle is tight, very slick looking

[@svleonard85]

Love your content. Got my side skirts installed today. Your video helped tremendously. Thanks for making it.

[@SGTKrash]

Looks good with the side body moulding

[@brimley0724]

Thanks for posting this tutorial! The side skirts look amazing!

[@emilymorgan3364]

Hi! Your tutorials are so helpful!! Do you think these will apply/help me with modifying my 2023 Subaru Impreza? I can’t seem to find any on that car

[@danbel34]

Very detailed and comprehensive, well done, thank you.

[@MatthewSmith-vn1nf]

Hey mate. Thanks for the great wrx videos. Wondering if you could do a video on replacing the standard older 2015 wrx cup holder with the newer 2018 premium cup holder with sliding closure. I think this adds a lot to car interior look but not many people have done it. I think it looks poor on the older and v1 models. Thanks!

[@xil3ntkha0s]

Wish all oem pieces fit perfectly like this. Bought a new trunk but there’s a gap on one side and it drives me crazy.

[@chrislittle20]

Wow awesome video, I have to check out the rest of them now.

[@MrBilly235]

Your car looks great not too much anything, just right!

[@F80Amar]

Thank you so much for this video

[@dundeefus11]

I came to this video to look at the install... I noticed the subtle flag overlay on your rear passenger window...where did you get it? Nice touch...I am now contemplating this as opposed to a small flag on the door

[@bad_puppy_6740]

Very detailed install!

[@RS-jr1qd]

Hey my 2021, I bought it new. Im trying to put these on and it seems like it’s made of a super soft plastic. I basically ended up almost string the screw. And the screw has turned into black resin almost. I could have totally messed this up. But I was using the proper tools. Idk what’s going on, any advice on removal?

[@derrickleong8844]

Where can I buy the template for the side skirt? Also, does the side panel have those little X's like the front bumper does for the front lip install?

[@SC2Racer]

Great video man, but is the removal of the side skirt needed ? Using some Ramps would make like a lot easier .

[@fekawidjaja1235]

Thank you for a good video

[@TheKRAZYboy123]

Love your videos man! Question that you might be able to answer: For CVT WRX's ( I have a 2016 Premium) is getting the Boomba BPV worth it and in any way harmful for the car? Ive been seeing its a good mod and what are your thoughts?

[@petrmiskerik]

lately I am thinking about remove those side skirts and treat metal body behind/underneath with some anti corrosion stuff Has anyone done this before?

[@Ryan-719]

Ism crew lets goooo

[@michaelgeorge5436]

Would this install be possible without removing the side pieces and just jacking the car up instead?

[@texasitalian84]

Hey bro love the content ! Where u from ? Based off the videos your in western NY ??

[@ronfromportland]

Do you think this is possible to install without the oem hardware? The reason I ask is because I purchased a used STi oem side skirt kit but it didn’t include the hardware. I was thinking of just using screws from a different kit

[@ronfromportland]

@@akqjtn thanks!

[@Steven-TV0229]

Hello friend how can I find that same side skirt

[@Simba-Ironside]

Does oem skirt/front lip clear ground well enough for parking spots, bumps, etc?

[@eliashrodriguez6651]

Where can i purchase more of the 10mm seal clips?

[@michaelgeorge5436]

Great vid and good explanations. I always laugh at Americans and their use of imperial measurements though 🤣🤣🤣

[@__akuuma]

where’d you get the hardware?

[@mauriciobravoderueda5253]

Definitely remove the side moldings. I always felt they gave cars that old 99 Ford Explorer vibe

[@joev8275]

Did you install the side moldings yourself?

[@Directelements]

smh.. still cant believe u abandoned us got an sti... the ej belongs in the antique shop

[@jktgg6787]

Hi Im installing mine right now. What do you do when you loose thread the plastic screws on the bottom? Any suggestions would be helpful thankyou!

[@pukthewizz]

ta heaps

[@nesqulck6985]

Im scared lol