Subaru OEM Front Lip Spoiler Installation 2020 STI

[@WeAreLeviticus]

Bro the quality of this video is amazing. Great camera angles, great tips, no BS talking into straight to the point. Easiest sub, like and notification bell Iv ever slapped

[@guitarmon5765]

the tapping process is really important trust me.and thanks for the detailed video, I couldn’t finish it without this one

[@jayenriquez3727]

It looks good! A front lip is a must in all STIs. As it doesn’t line up with the rest of the body kit if you look at it from the side

[@Mskaterkid2]

This was by far the best installation video I think I've ever seen. Keep it up!

[@TheDiolulaLife]

The best on KZbin!

[@gilbertmiro6918]

Thanks to your video, I bought the front lip spoiler and the side skirts for my 2019 Subaru STI.

[@paulmarsdensr1095]

I really like the look of this front lip alot.

[@MrGodfreyC]

I really like this front lip

[@akqjtn]

Thanks I do too!

[@manishchachra]

Appreciate you helping the community at large. How'd you learn to do all this? haha. In any case, great video and I appreciate all the useful tips, especially the black tape on the drill bits. Made life much easier. Great looking lip, too, diggin' the OEM quality/fitment. Hope you're enjoyin' your car! Looks sharp. :)

[@akqjtn]

Hey thanks for watching! Hope your install went great.

[@manishchachra]

@@akqjtn all good, thanks. Watched this video a few times, for sure! Cheers!

[@paulmarsdensr1095]

A great video brother. Very attention to detail oriented as always. I will get this lip from Irvine Subaru out here in Ca. That STI under spoiler looks great but i cant justify paying 500.00 dollars for it. Stay safe and Subies forever.😊

[@jamal3121]

Dude, this was such a good install vid. No wonder the factory lip is $400

[@Tonyromeo1970]

Best looking front lip IMO

[@JStockinger]

Thank you for this install video. It was perfect and straight forward! Just install my lip today.

[@gsgleason]

Fantastic video with great camera work and narration. Thanks!

[@paulmarsdensr8199]

That front lip looks good. Great video.

[@Stigness23]

Thanks so much for this video, installed mine today with your instructions!!!

[@esemteckreal4873]

I need to buy that body kit. Amazing video

[@K03sport]

Nice video. I'm not a fan of the OE lip because of how it rises up on the sides to the wheel well. I wish it stayed flat or straight across w/o the side portion or shoulder. I know that it aides in attaching the lip to the inside of the lower fender, but still not a fan. I'm not a fan of the STi side skirt/rocker extensions or rear spats either because of the same issue. The HT Autos [V3] or Verus designed lips/splitters, extensions and spats are more my speed as they do not rise up and over the bumper or rocker panel.

[@K03sport]

@@akqjtn...don't get me wrong, the OEM STi stuff still looks nice (and should be included std on all STis, not just special models)... It's just not in line with my vision.

[@jgzero18]

Will adding the front lip or even the side skirts take away from the ground clearance of the car? I’m just wondering about snow

[@L1qu1date]

I heard these have problems down the road (they get loose etc), did u experience any of this?

[@jcesparza7490]

Love it, have the same color really digging how it looks.

[@michaelhernandez1398]

What do you think looks better this OEM lip or the MP style one on the WRX. I like the more subtle look of the mp style the Subaru one looks a little too aggressive to me.

[@heavygruff]

where did you get the licence plate holder? all i can find is the relocation kits

[@buildingconfidence1465]

Very helpful man! I just installed mine following your guide. Thanks!

[@ZachKateAda]

I have a 2017 Subaru Impreza Sport sedan and have been looking for a front lip but don't want the STI logo because I don't think it would make sense but that's just me.

[@Jewishcatfish]

That does look nice and great install vid thank you!

[@romansh6737]

Thank you! I used it us a guide for my car!

[@mikecorvasce7074]

Great video man so informative and detailed! Thanks brotha!! 🙏

[@dplurlights4331]

Awesome video man! Do u plan on making videos for the side and back lips??

[@gilbertmiro6918]

Looks awesome! Great video.

[@bad_puppy_6740]

Nice detailed work!

[@michaeldominiquez7253]

How did you add that red tape to your grill and on the emblem

[@smnihal7440]

Do you know where I can get those rubber filling for the lip gap?

[@Mr20564]

Thanks

[@joeyromaniello1200]

Great video - thank you!

[@maxa.759]

Front license plate bracket? is it tilted? TA

[@Oscarcode1033]

nice looks great

[@AoiKaze2000]

Do you have the JDM splashguards on? If so, are you thinking about going with rear spats?

[@AoiKaze2000]

@@akqjtn Wait, that's USDM splashguard (not the JDM ones - they're actually a bit bigger). Either way, if you do decide to do a pair, I'd be interested to know how you plan on mounting, and what you plan on going with. The downside with either is that they change how you can mount a spat so it becomes a rather... interesting... exercise in creatively mounting the spats. For those wondering what I'm talking about: USDM Splashguard: www.subispeed.com/2015-subaru-wrx/exterior/rear-lips-diffusers/subaru-rear-aero-splashguard-2015-wrx-2015-sti#.XuenGBySlGM JDM Splashguard: www.subispeed.com/2015-subaru-wrx/exterior/rear-lips-diffusers/subaru-jdm-aero-splash-guards-rear-2015-wrx-2015-sti#.XuenHRySlGM

[@AoiKaze2000]

@@akqjtn Yeah, it's why I went with them (still have a WRX CVT, currently stage 2 =). On a completely different note, did you do any sound deadening to your STI?

[@triniman13340]

Great job.... seed you got the STI

[@SonikJesus]

Does anyone know the sizes of the well nuts and bolts? Also, is there a part number for the two wheel well clips? I want to install an OEM lip I got without hardware. I know I can use self tappers or bolts and washers but would prefer to do it OEM style.

[@WenFuh]

Hi, same here, I got the OEM lip (E2410FN000) without hardware. Any idea about the sizes of the well nuts and bolts? Also the needed well clips? Thanks

[@kristennizzaro7305]

Real nice 😍

[@dylanbagona4031]

Do you know where can I get this push clip 4:24

[@Menace_sti]

Dang thats is such a great install video. You tell it so promptly and i wish i was on ur lvl with install videos lol.. you won a sub from me!!

[@Menace_sti]

@@akqjtn i will most certainly haha just need an idea book to right stuff down lol. Or just keep buying parts and talking about them

[@donAKAthedonjp]

Man, I hate you!! Haha! I was 50/50 on them but now I'm all in on getting it. Looks great!

[@rumbledotcom2261]

Badass

[@pukthewizz]

ta heaps!

[@Scatpack_Trooper_392]

I can’t see a make spot on my STI 2020 🤨

[@jacobmartel2468]

Uh I fucked up drilling the hole by the wheel and did 3/8 instead of 1/4

[@akqjtn]

Just get a different clip, there are lots of cheap kits an Amazon

[@dilsonflores6974]

What a great job. Can you do mine? 😃

[@jamzwayne]

Dooooope

[@sandeepnarayan5581]

haha sorry I'm still looking for the link to buy them. Can anyone help

[@sandeepnarayan5581]

@@akqjtn yes man front and side