Great job from start to finish. Loved the blueprint for the bolt hole!
@martinburgess48142 жыл бұрын
Good day nice videos.I allways use a blow lamp and burn off any carbon internaly.including spark atrester screen here in uk we dont need the screen by law.good luck and all the best
@theaustralianrestorer62112 жыл бұрын
Great tip!
@paulkinnear7053 жыл бұрын
Aluminium tape, or Aloominum for those who don’t speak the Queens! 😂😂 Almost fell off my chair!!! Gold! Great vid, nice explanations, good “how to” guide! Thanks!
@theaustralianrestorer62113 жыл бұрын
🤭😉
@angelapinnock37933 жыл бұрын
Thanks Sean.👌 I always love watching restorations, dirty things being cleaned, rebuilds, renovations; you name it🙂
@christinemiller72383 жыл бұрын
I’m glad you added this channel to your rwepitware. Restoration is one of my favorite things to watch.
@theaustralianrestorer62113 жыл бұрын
Update to this one. I was able to get my hands on a helicoil kit. A much more permanent solution than what I did in the video :)
@jamesfrench72993 жыл бұрын
What was the cost?
@sonniecampbell17883 жыл бұрын
The famous whipper snipper! 😄💚Fascinating stuff. My Dad could fix anything, too, so I like watching repairs and restoration. Good video Sean!
@andrewsteele76633 жыл бұрын
Thanks, I know some people will wonder why a grown man can watch another equally grown man work on his Stihl. But it is very satisfying to see the job completed with the problems beaten, cheers
@suzettefree1293 жыл бұрын
You are one very resourceful and talented fella! Enjoyed the video.😊
@shirleyparr57432 жыл бұрын
It is so interesting watching you service/repair equipment. Bloody good job!
@joannablake81993 жыл бұрын
I absolutely love that you can do all these repairs. Plus, this 2nd channel is a very good idea ... I was thrilled to see you fix the little metal cabinet. Love it all, cheers, joh b.
@theaustralianrestorer62113 жыл бұрын
Thank you very much!
@Sensei948 Жыл бұрын
@@theaustralianrestorer6211 Friend, what Torxy are needed to unscrew the housing and silencer?
@Digging_KangarooАй бұрын
I’m glad you took the Chinese safety boots off before you started work 😅
@anonymity68763 жыл бұрын
Man of many skills and talent. Enjoying your channels 😀. 👍🤘😎🇦🇺
@theaustralianrestorer62113 жыл бұрын
Thanks for the visit
@tazmanken01 Жыл бұрын
I have this same machine and because of the ethanol in the gas here in the US I have had to replace my carburetor several times about every 2 to 3 years.
@sisqui19502 жыл бұрын
Loved this Sean ... just what I needed to watch 👍🏼
@theaustralianrestorer62112 жыл бұрын
Awesome, thank you!
@anneharris11453 жыл бұрын
You amaze me you can do anything love this channel
@nancysims92213 жыл бұрын
My Dad could fix anything as well and loved doing it! I would help him and have used a tap many, many times. I was glad to see you reverse direction a couple of turns as you were tapping, Sean. The mark of a pro!
@HoneyBee-ge2wx3 жыл бұрын
Awesome I love finding a solution to problems like you did in this video!!
@neusac45903 жыл бұрын
You did a nice job practically rebuilding that. Most times that's all it's needed, but people just trash it. 👍👍👍👍👍😉🇺🇸
@JHK982193 жыл бұрын
As always very entertaining Sean. Great work. On a side note, would you consider doing a Blade sharpening video. I haven't had much luck doing mine. Thanks a million.
@RISVANHERIYANTO3 жыл бұрын
Nice vid mate loot of information from what u did. Btw can you make, a tutorial video for clutch drum replacement ?
@raebates29732 жыл бұрын
Thanks for this Vid matey. Whats the replacement spindle heads you use?
@theaustralianrestorer62112 жыл бұрын
Cheers mate (sorry for the late reply) Do you mean the black trimmer head itself? I just use a generic speed feed head. See this video for the type I use: kzbin.info/www/bejne/jZPRh3R9q8uAgbM
@lindawellinghoff54323 жыл бұрын
My husband was innovative too. Loved watching him solve problems. Love watching you do the same. Great job. Thanks
@raytalbot58903 жыл бұрын
Have you seen Cutting Edge Engineering in Australia? He does some awesome cutting, gouging, welding & machining 👍👍🇬🇧🇬🇧
@DoctorMikeReddy Жыл бұрын
What are you spraying the exhaust with at 7:42-8:19?
@UtwoBed Жыл бұрын
What's with the brush? There is this great new invention called a compressor that makes compressed air. Great for blowing crap out of equipment.😁
@mandycoleman13943 жыл бұрын
Sean I didn’t know you had another Chanel ! Your certainly a jack of all trades! Good work by the way
@kerryd253 жыл бұрын
I love your attitude about this stuff! If it ain't broke don't fix it but a good cleaning never hurt anything! Great job Sean! : )
@chancetaitoko66467 күн бұрын
How do you get the muffler screen out to clean when bogged? Cheers
@roberttweed27353 жыл бұрын
A scourer pad works as a filter if you have nothing else
@pennyneal24563 жыл бұрын
Sean, check out the lawnmower on Mower Man Dan and tell what it is. Looks old. It is unusually long.
@andreashaynes33463 жыл бұрын
That was great, Sean. Going to watch again ⭐️⭐️⭐️ Take care
@mtozzy113 жыл бұрын
I got an old Stihl FS90AV on the bench at the minute. It was my Grandpa's and used it alot as kid here on the farm. Runs for 5 minutes then cuts out. So it's overhaul time for the old dear. Have the carb in the ultrasonic bath at the minute. I generally leave them in over night. It's not my main brush cutter I use I normally use a Honda umk425. I normally only the Stihl out in the paddock around electric fence posts and the likes.
@caveiraalves3363 жыл бұрын
Essa máquina e muito resistente, aguenta serviços pesado tranquilo, tenho e recomendo!
@johnkinnane5473 жыл бұрын
G'day Sean good fix on the head mate, that motor sounds as good as the day it was made good to see you again John
@kathyramirez55123 жыл бұрын
My first visit to this channel. I love blade mate but Wow this is very cool. Your attention to detail is unbelievable. Just as with your lawnwork. For such a big man ( tall, works out, manly man 😊) you have such a delicate touch. Amazing. Take care of your tools and they will take care of you right? Now I have 2 places to enjoy your expertise. Man now I'm going to have to go back and watch all of this channel also. 😂😂
@theaustralianrestorer62113 жыл бұрын
Thank you very much!
@angel4hire3 жыл бұрын
Glad to see you back with some new content. You're just a great everyday type entertaining guy.
@SouthOfGate3 жыл бұрын
can’t watch til later but I like it already!
@greenacres17392 ай бұрын
Do the stihl fs80 have a screen in the muffler?
@mishkawp82003 жыл бұрын
Great video. Very interesting to see how these things work.
@michaelzanotto84693 жыл бұрын
Great video. How is the workshop temperatures going, especially without insulation?
@theaustralianrestorer62113 жыл бұрын
It's as you'd expect lol Gonna be sweaty in summer!
@michaelzanotto84693 жыл бұрын
@@theaustralianrestorer6211 was insulation not offered by the company? I insulated mine before wall panels and roof sheets went on. No condensation and comfortable in all Melbourne seasons
@theaustralianrestorer62113 жыл бұрын
@@michaelzanotto8469 yeah it was offered. I opted out to save myself a few grand. I've worked in hot sheds for years, nothing a fan doesn't fix :)
@michaelzanotto84693 жыл бұрын
Cheers
@yardguy10143 жыл бұрын
as aussies I swear we fix things that should be replaced bahahaha , personally i would of gave up and ordered a new head for the servicing abilitys of it not breaking next time . good content mate
@theaustralianrestorer62113 жыл бұрын
Cheers mate. Check out the pinned comment. This fix was more of an experiment. I've since got my hands on some helicoils and given it a permanent solution
@JoB-xb5cj3 жыл бұрын
Thank you Sean. That was excellent. I love learning from you.
@theaustralianrestorer62113 жыл бұрын
Glad you enjoyed it
@craigstrickland15723 жыл бұрын
Happy Father's Day. Nice work. Maintenance is a pain sometimes but necessary.
@sheilam49643 жыл бұрын
We learned a lot more than expected there. Which is a good thing. 😊 👍👍👍👍👍
@georgiapeach72913 жыл бұрын
Loved the video Sean. I love watching repair videos. I learn so much from them and you're a great, patient teacher. Please keep them comiñg. Thank you so very much! 😀❤️
@robertphilion12253 жыл бұрын
Nice job, great video!
@jamesfrench72993 жыл бұрын
Good to see another vid out. Learned a trick or two here. I have an old Black and Decker battery operated screwdriver that uses 4aa batteries. It's great for working on this stuff.
@1funcar Жыл бұрын
What I was hoping to see was how to remove the spark arrestor screen.
@DBLG65 Жыл бұрын
Maybe an air compressor to blow out the dirt. .
@jennifermartinus49293 жыл бұрын
Reminder set, cant wait 😊
@sithlore8433 жыл бұрын
Great work as always. Have to love it when you have to use inguineuity to complete the project. The mind is the greatest tool we have. Cheers.
@theaustralianrestorer62113 жыл бұрын
Well said!
@Patrick49593 жыл бұрын
grouse work Sean mate love it and yep Lock Down is a pain the ass for sure and if only people would not put is in there and all but still you beat the odds in this video mate cheers ;)
@genesmith92113 жыл бұрын
really enjoyed this one, keep it up buddy.
@theaustralianrestorer62113 жыл бұрын
Thanks for the visit
@tomatherton99593 жыл бұрын
I live life on the wild side and hit the speed feed head on me steel cap boot instead of the concrete and grass like a real man should.
@theaustralianrestorer62113 жыл бұрын
never thought of that, great idea!
@andreashaynes33463 жыл бұрын
Reminder set 😀👍
@andreashaynes33463 жыл бұрын
Even better, second time round 😀😀😀
@laurawilson30493 жыл бұрын
Great moto to go by " If it's not broke don't fix " Tidied up and ready for action.
@drunkdunc87383 жыл бұрын
We have the same shed footwear , great job Sean 🍻
@theaustralianrestorer62113 жыл бұрын
Aussie work boot
@ronsorrentino79873 жыл бұрын
Invention is the mother of necessity, which you have proven! You make it look too easy. I’m usually cursing myself while I come up with the solution, haha. I always have JB weld on hand at all times, don’t know if you have the down there. Really dig the shop set-up! Get the rest of your kit ready, grass will get tall.
@theaustralianrestorer62113 жыл бұрын
I feel ya! This will only be a temporary fix. I'll drill it out again and insert a helicoil when I get my hands on some
@donaldstevens93243 жыл бұрын
Enjoying your videos Sean, great stuff. One suggestion - use some anti seize on those exhaust bolts. Make the job much easier next time. Keep up the great work!
@theaustralianrestorer62113 жыл бұрын
Good point!
@monicap50713 жыл бұрын
Donald Stevens that's why they invented WD40 😂
@donaldstevens93243 жыл бұрын
@@monicap5071 Hi Monica - anti seize is so you don't have to use penetrating oil and hope that the bolts break free, keeps them from "welding" together in the first place.
@pxelguyplays3 жыл бұрын
22:09 what a happy face in the bottom left corner! 😃
@brutus473 жыл бұрын
Fun video. Like how you just roll with the problems and figure out a solution
@theaustralianrestorer62113 жыл бұрын
Thanks Nathan. Nothing like a snapped bolt to really get you thinking haha
@brutus473 жыл бұрын
Let me know how that putty holds up. I’ve always been curious.
@ianwood97713 жыл бұрын
Shawn this is Ian from N.C. U.S of A. Love the blade mate series of course but this channel is awesome too. We need more of these. I love how u and Tim and Al Bladez are all buddies. Please do some more restorations. I know ur a busy man. Since it is spring down under now. Its still summer here. Keep up the good work bud.
@urbanaerialexplorer18853 жыл бұрын
I'm surprised you haven't come up with a solution to stop replacing the plastic cover that you tap down on concrete to get the cord to come out - There must be a way to attach a metal protective plate or small thick plastic heel onto that plastic bit to give it more life ? Design one that's generic to place on any whipper snipper and you might be on a winner !!!
@theaustralianrestorer62113 жыл бұрын
It's just a matter of screwing a bolt through the cap. No reason not to, I just never have!
@urbanaerialexplorer18853 жыл бұрын
@@theaustralianrestorer6211 Stick your logo on it and sell them online or in Bunnings - I'm guessing many mowing guys and gals would want one ... even offer a few as a give away on both of your channels !
@ianwood97713 жыл бұрын
Sorry i spelled Sean Shawn...lol
@tonicorona52773 жыл бұрын
Nice
@pxelguyplays3 жыл бұрын
That one thumbs down was left by the grass that got cut down at the end of the video
@theaustralianrestorer62113 жыл бұрын
🤣
@francischagas29953 жыл бұрын
💋 do Rio de Janeiro Brasil
@_bluephoenix_3 жыл бұрын
Sean- Lawn extraordinaire Restorer Dry witted Smart arse and; Artiste... Is there anything you can't do?! 😂
@theaustralianrestorer62113 жыл бұрын
I'm pretty bad at flying without a plane 🤣
@damienquinn3 жыл бұрын
Almost sensory stuff! Was transfixed - Thankyou!
@theaustralianrestorer62113 жыл бұрын
You're welcome!
@JCZ2601NL3 жыл бұрын
🇳🇱👍👍👍👍👍👍👍🍀
@raytalbot58903 жыл бұрын
Could have put a tray under the motor to save the de greaser?? 🇬🇧🇬🇧👍👍
@theaustralianrestorer62113 жыл бұрын
it's from my parts washer. Due for a change
@markcaldwell39783 жыл бұрын
Helicoil and use the fine thread M5 Stihl screws.
@theaustralianrestorer62113 жыл бұрын
Yeah I plan to when I can get some 🙂
@nightsailor13 жыл бұрын
Screw vs Bolt: A bolt has a nut. Screws typically go into machined holes.
@theaustralianrestorer62113 жыл бұрын
Yep, terminology ain't my thing these days lol
@jdullemond3 жыл бұрын
Next time you come up against a stuck screw like that, take a punch with a tip a bit larger than the screw head and give it a few firm strikes with a hammer. It will usually come right out after.
@theaustralianrestorer62113 жыл бұрын
I tried that mate
@jed19133 жыл бұрын
Look into getting yourself a compressor with air hose to blow dirt etc. off tools.
@jamesfrench72993 жыл бұрын
How do you think he runs his sand blasting cabinet? You can hear it pumping in the background.
@chrishelms19673 жыл бұрын
Its quite new and stiff.............That's what SHE said....
@theaustralianrestorer62113 жыл бұрын
🤣
@duncanjack23353 жыл бұрын
Is it just me or does the exhaust at 3:42 look like a little old man crying?
@theaustralianrestorer62113 жыл бұрын
haha
@laravaniren27193 жыл бұрын
Great video. I live about 3 hours north of Brisbane. Thank you for the timely reminder to go and get my mower and whipper snipper serviced. I don't have the confidence to do my own. Plus the mower needs new blades and may need a bit more muscle then have got. Lol
@DvCM3 жыл бұрын
Sean, you are missing one essential tool: a thumbnail.