STIHL MS 261 C-M REVIEW (Best All Around Chainsaw)

Stihl MS 261 Playlist: • Stihl MS 261 CM
Stihl MS 261 Start-Up Procedure: • Starting a Stihl MS 26...
Stihl MS 261 Maintenance: • Chainsaw Maintenance (...
See this chainsaw run against the Husqvarna 550 xp Mark II: • Stihl MS 261 CM vs Hus...
Today I will be doing a Stihl MS 261 C-M Review. If I could only have one chainsaw, I would choose the Stihl MS 261 CM. I have a lot of chainsaws, but ever since buying this one, I find myself grabbing it over and over. In my opinion this is one of the best all around chainsaws. Find out why in this episode.
(more below)
This is one of Stihl's entry level pro-series chainsaws. The pro-series gets significantly more expensive than the home owner's chainsaws and the farm and ranch chainsaws. In this episode, I tell you why I think the MS 261 C-M is worth the investment. We'll also take the chainsaw out into the woods to see what it can do.
MY FAVORITE FIREWOOD TOOLS
Moisture Meter: rstyle.me/+L_zba8OFBawzf53UTJ...
Combi Gas/Oil Can: rstyle.me/+heOotY_7DZSo_47Gdz...
50ft Loggers Tape: rstyle.me/+Sfd1VhYMD9gUu0Tbbl...
LogOx: amzn.to/2MBt8zy
Hard Hat: amzn.to/3CHMTdC
Chainsaw Chaps: rstyle.me/+a0TF5cbswiXmcdNsXr...
Husqvarna Sharpening Kit: rstyle.me/+zbEZe5tMRtRMdB9v79...
Oregon 620 Bench Grinder: rstyle.me/+4aKNoA3ihR4V-BQSIt...
Firewood Bundle Bags: amzn.to/2Kr2Xe4
Kinco Gloves: amzn.to/2W8ZxCG
Bugz Goggles: amzn.to/3nAe6aY
As an Amazon Associate I receive a small commission on eligible purchases.
You can also see me using the Stihl MS 261 C-M in the following videos:
"Tree Thinning, Skidding, and Bucking Firewood" - • KIOTI CK2610 TRACTOR a...
"Making a Trail in our Woods" - • BRUSH HOGGING WITH KIO...
"Chainsaws Cutting Down Trees Near the House" - • Tight Fit: Cutting Dow...
I love chainsaws! My wife might say I am obsessed, but I like to think of chainsaws more as a "way of life." :)
00:00 - Intro
00:35 - Review Starts
00:44 - Pro-level vs. Farm and Ranch/Homeowner's Chainsaws
02:26 - Who and What it's Good For
04:25 - Saw Features
07:20 - MS 261 Cutting Down a Tree
09:19 - MS 261 Bucking a Tree
Thanks for watching! If you like videos that inspire you to get outside and use tools and equipment, please subscribe, hit the thumbs up, and ring the bell.
#stihl
#stihlms261
#firewood
Find Old School Millennial on social!
Instagram: @oldschoolmillennial
Facebook: / oldschoolmillennial

[@OldSchoolMillennial]

I'm giving away a BRAND NEW STIHL MS 261 chainsaw! Enter now through November 23, 2023 (Thanksgiving Day). Details here: kzbin.info/www/bejne/kHO5pmqtZ6d4oq8

[@jacobmckee5862]

Nice video. My personal "go-to" is my Ms290. I bought it brand new in 2012 as a dumb 18 year old. I used as abused it before before learning (or taking the time) to really learn to maintain a saw. It's been run a tad lean, used with a dull chain, air filter rarely cleaned, and left out in the rain and snow. Other than plugs, filters, and one fuel line, it's never had work done on it. I used it yesterday to buck a 18in white mulberry. If it ever does fail, I'll just end up throwing a 390/49mm P&C in it to start it's new life. But for now, it just won't die.

[@OldSchoolMillennial]

Wow, that's a great saw! You know it's a good saw when it can take a beating. These saws will last forever if you just bring them back to life with rebuild kit. Thanks for watching!

[@jacobmckee5862]

@@OldSchoolMillennial I hope to see more content in the future. Subscribed!

[@OldSchoolMillennial]

Thanks man, I'll see you on the next one!

[@brokenarrow2835]

Been using my old 310 here in South East Louisiana I bought after Hurricane Katrina which cut tons of trees with then ,now using it After Hurricane Ida which I have been cutting trees for the past two weeks . Ready for an upgrade now ,my 310 has served me well..

[@OldSchoolMillennial]

The 261 is a solid chainsaw. It works in a a lot of situations. Good luck, man!

[@Oversoul225]

Ida is how I got to the review. Looking at buying a 'real' saw, and think I've settled on this one, assuming I can find one to buy!

[@ryanmaitland1230]

261 is my lightweight go to/ground saw. Have Had the saw for a couple years and it’s great. 461 is a beast for the larger stuff.

[@OldSchoolMillennial]

That's a great setup! Not a lot you can't handle with those two saws.

[@ryanmaitland1230]

@@OldSchoolMillennial Agreed, there isn’t much I can’t do except I prefer a climbing saw in a bucket truck. I need to get a 194t or a 201tc next and I’ll have the perfect trio.

[@txdukklr]

i have a 391, a friend has a 271 and i just bought the 261c. We did an absolute ton of cutting in south lousiana this last few weeks after hurricane laura and that 261 is absolute money.

[@OldSchoolMillennial]

I hope you and your loved ones are okay. Yea that would be a good test for those saws. I agree the 261c will do just about anything you throw at it. Thanks for watching, man!

[@g.d.7629]

Yes the 261 is a pro high HP saw not plastic clamshell setup like most.

[@g.d.7629]

And theres really nothing wrong with clamshell design just pro saws use a magnesium case and cylinder bolts on to it if you do rebuild.

[@txdukklr]

@@OldSchoolMillennial great video . . . the saws are getting another work out as Delta just ran on top of the exact same area. One question once i ramp down the usage is there a best way to store these saws so they can maintain performance when they aren't being used daily?

[@OldSchoolMillennial]

@@txdukklr To keep chainsaws running at max performance I like to run non ethanol mix. Ethanol can mess with your carb, especially if left to sit. I also like to run my chainsaws out of gas when storing them. Doing this and putting fresh gas every time will help them run at their best. Good luck with your cleanup and stay safe!

[@megamike4357]

I love my 261. Very versatile, and does everything I need.

[@OldSchoolMillennial]

I love mine too. The power to weight ratio is sweet! Thanks for watching!

[@KeystoneOutdoorsman]

Upon looking for a saw. I went to a local Ace for the 271 Stihl. None of the 3 they had would kick over and the last one had a fuel leak. I went over to the home depot and picked up the Echo CS 590 and it is a beast. I cannot believe the value of this saw. Its been great. 60 cc, 4 HP, 5 year warranty, crankcase motor all for $420. Id be eager to know what you think of them. Love the channel as it reminds me of what my family and I are doing at small scale. Keep up the good work!

[@deadmanswife3625]

4 months. And not a peep. I can't help but wonder why

[@ididiesel83]

A guy I work for got a MS261 with a 20'' Bar and it's a Beast, I ran that thing 8-10 hours straight every use with no issues. The only "flaw" is that it doesn't like to be buried in hard wood like Black walnut, with a sharp chain and letting it take its time it bogs down very easily.

[@eddietownsend8480]

also is too small for milling realistically, was recommended for light duty milling but it doesn't really even hold up to that. came very close to burning it out on 2x6's and 8's.

[@24cupsandcounting]

It's more of a Ferrari than a Super Duty diesel, I own one as well. Best small saw I've ever owned.

[@mikedillon6233]

Years ago I bought a Stihl ms250. Other than when I put the wrong fuel in, stupid alcohol-based fuel!, and I had to have it fixed for that, once I ran the right fuel thing works pretty damn well! And thank you for the review , it helped a lot!

[@OldSchoolMillennial]

That's great to hear! That is my hope to help people making decisions on choosing the right tool for the job. Thanks for watching!

[@stevest.martin3940]

I’m going to buy a good saw before gas chainsaws are outlawed in CA so I’m thinking of this saw.

[@TheGoodguy68]

I agree it's a fantastic saw. I did have to replace the M-Tronic ignition module this year after it lost spark and I didn't even mind because it's cut so much wood in the 6 years I've had it.

[@OldSchoolMillennial]

It sounds like your saw is earning it's keep. Thanks for watching!

[@opt4]

Just got done cutting up some red bud my go to is also a 261 cm. Ps. I know a 261 is way over kill for a couple red buds. But its such a comfortable saw you can use it for anything. 261 best ground saw!

[@OldSchoolMillennial]

This is a great all around saw! No judgement here, man. I completely understand.

[@missesmew]

Just bought a 291, love it! Great music by the way 👍🏽

[@OldSchoolMillennial]

Awesome! Thank you, and thanks for watching!

[@6string327]

I've had my 291 for two years. Starts great but had lots of little issues. The exhaust muffler fell off suddenly, the bar and chain gets no oil, the chain gets really slack and tight at the same time, gonna have to sell it and get another one I guess. I've had two Stihl saw lemons one after another.

[@hendy4584]

Just bought mine yesterday. Was going to buy an MS250 until I had an opportunity at a friends cabin to use both the 250 and 261 and it’s not even close IMO. Don’t get me wrong, the 250 is great and cut through the same stuff as the 261 and probably all I really need but the 261 is an absolute hot rod of a saw in comparison. I’ve heard the 261 called “The Torque Monster” and I put the boots to both saws and could not get the 261 to bog down, it just powers through everything. Here in Canada the MS261has about a $300 difference from the MS250 but in the long run I believe is a far better investment if you’ve got the extra cash to dole out. My .02.

[@OldSchoolMillennial]

Awesome man! I definitely agree, once you use a pro chainsaw like the MS261 there is no going back. And yes the torque on these saws is incredible. It's hard to explain the enjoyment of using this saw until you get a chance to try it for yourself. Thank you for watching!

[@hendy4584]

Old School Millennial they had a few saws up at that cabin on 10 acres of mostly treed property. Every year they cut up all the deadfall for firewood for the 5 cabins they have there and there’s some big 30” plus diameter birch trees we were bucking up. They had a Husky that was alright but mostly Stihls. An MS201 they really like for delimbing as they walk the fallen trees and use it one handed and one guy was using the 250 which he let me have a go. I really liked it but one of the old guys with a thick Czech accent says hang on a minute. He came back with the 261 and said try this. I made one cut and looked over at him. He started laughing and yells up to me “now try another cut but just lay the saw on the log, no pressure”. That blew me away, it did take awhile longer but with one hand on the saw (don’t try this at home) it buzzed right through it.

[@OldSchoolMillennial]

@@hendy4584 Haha, and then you were hooked! I know that feeling, you're going to have so much fun with that saw and it will serve you for many years to come.

[@danielpadgett2831]

I have the ms271 with 20in bar and for me that thing rips threw the wood i put it to i love it. And def agree on the non ethanol fuel i run the stihl moto mix.

[@TheWoodsmanMilling]

If you ever need a bigger saw, I'd suggest the 661. It's a bit heavy for some people, but the power is great. I normally run a 25 on mine.

[@752brickie]

Just bought a 261 today. Was looking at the MS 271 but the weight difference sold me on the 261 that and pushing 70 pretty hard!

[@OldSchoolMillennial]

That'll be a great saw for you. Thanks for watching!

[@752brickie]

@@OldSchoolMillennial Love you videos ! I think I will be very happy. This is the 9th Stihl product we own. They have been just amazing over all the years. My late father had a weed eater around 20 years and never changed the spark plug !!

[@laneybrandonbl]

I just bought me one today and boy am I loving it!

[@OldSchoolMillennial]

That's awesome! Enjoy your new saw.

[@rudycarlson8245]

I’ve had my 261 for about five years absolutely the best chainsaw I’ve ever had! Plus it’s kind of sentimental to my dad taught me how to use a chainsaw on that 261

[@rudycarlson511]

I have to agree with you there the MS 261has to be the best chainsaw there is! I got one myself I’ve had mine for about five years now and it has not let me down always will start when needed it is possibly the easiest chainsaw to use I swear mine could sit for about a year and It could still start right up as if you using it just yesterday! It is that great to use! I mainly use mine for firewood

[@OldSchoolMillennial]

That is awesome. Same here, I use mine mainly for firewood but it works great for felling trees up to a certain size. I expect to be using this saw for many years, and who knows it might last until my son is big enough to start selling firewood. Thanks for watching.

[@rudycarlson511]

@@OldSchoolMillennial When start learning to use a chainsaw stihl is The best one to learn on! We used ours to cut down a few trees ourselves but mainly it is for firewood like yours

[@deliverybryan1138]

My go to chainsaw is the ms 362 , and I someday a ms 462 or a ms 500i will also be my other go chainsaws . I enjoy the ms 261 too

[@snuffdipper6611]

Bought my 261c-m few days ago finally tried it out today. Seems like a good saw love how lite it is. Didn’t seem very powerful but I hear they get stronger over time. Or I’m just use to using my ms 360 pro

[@OldSchoolMillennial]

This is a great saw. They do get stronger over time. I think it will pair nicely with your 360. Thanks for watching!

[@snuffdipper6611]

Yeah my 360 is best stihl saw I’ve ever used. Lots of power cuts big stuff very fast. Used 261 again today for second time. Still seems weak I had a 251 before I bought the 261 seems like my 251 was way stronger and cut faster than my new 261 I’ll give it some time see if she opens up any

[@coryturner9140]

Just picked up a 261 without mtronic today. I have a 661, 261 and an 038 super and I can see the 261 being my go to saw... lighter, more power and easier to handle.

[@OldSchoolMillennial]

You're going to love your 261! It will likely become your go to saw.

[@deliverybryan1138]

I just got a Sthil Ms 400 C-M and it's a good chainsaw I run a 25 inch bar on it and it's still a little monster !

[@codprocamp4690]

Just picked one up and it's a beast!!

[@OldSchoolMillennial]

Awesome, you're going to love it! It will stronger after you run a few tanks through it.

[@rudycarlson8245]

I’ve had mine for a couple years now I absolutely love my MS 261!

[@matthewbegin3462]

These saws are well worth the money, great review.

[@OldSchoolMillennial]

Thanks!

[@2420orion]

I bought this about a year ago and it is awesome. It rips with a 20 inch bar so I'm happy.

[@JaseVaughn]

Same config I have on mine. Great saw.

[@douglasedwards9076]

Thanks for the 261 rundown. I really loved the slide guitar intro.

[@OldSchoolMillennial]

I'm glad! I thought it was a cool riff.

[@TheWoodsmanMilling]

I have an old 028, Husqvarna 257, MS391, and an MS661 C-M. My go to is the 661, and I'm trying to sell the 391 and 257. I got my dad the 271 for Father's day last year, and he likes it. Only reason I went with the 271 is because he doesn't use it all the time, just for firewood for my grandma.

[@OldSchoolMillennial]

I bet your dad was thankful to get a 271 for Father's day. The gift that keeps on giving. You have a good selection of saws and you're pretty well covered with those saws.

[@TheWoodsmanMilling]

@@OldSchoolMillennial well, the Husqvarna broke down. Needs a new flywheel and ignition coil. I'm probably going to sell it once it's running as well as the 391. I've got my eye on getting a 462 and 881. Edit: I may get the new MS400 instead of a 462. Something to run a 20 inch bar on when I don't want to lug around a bigger bar.

[@chrisb9478]

After watching several small engine repair experts on KZbin, I’ve learned to stay away from Stihl Ultra 2 stroke oil. Everyone rates Amsoil Sabre as the absolute best. And if you need a cleaning 2 stroke oil, buy Echo Red Armor.

[@OldSchoolMillennial]

Cool. Thanks for sharing.

[@24cupsandcounting]

I love mine, light, speedy and well balanced, awesome for limbing. I have an 8 tooth sprocket on mine which helps. The only complaint I have is that the fuel tank capacity is too small, a tank of gas doesn't last long.

[@OldSchoolMillennial]

It's a great saw. I do agree, I wish the tank was a little bigger.

[@johnsweeney1712]

Great video, thanks for the info.

[@OldSchoolMillennial]

Thanks, John!

[@xpowertripx]

Love my MS-261 C-M. Other favorite is my Echo CS-501P. 261 Is a little bulky feeling at first vs the Echo but it makes up for it in power and anti-vibe.

[@joshuaranger1631]

I’m running a ms251, amazing saw by the way! but I really want to upgrade to the 261, I would’ve went with that right away if I had the money at the time

[@Wrathchildss]

I have this saw, 18” chain, it stops sometimes while cutting through logs, doesn’t seem to have enough power. Is this normal? What am I doing wrong? My old 16” Huskavarna used to rip through everything and was a smaller engine.

[@nikkiteachout4561]

357xp is my go to saw. I just bought a 261 to try the stihl seems to be a great saw. But still won't replace my husqvarna it will be the only stihl I will buy

[@OldSchoolMillennial]

I've heard good things about the 357xp. Hope you enjoy your new saw!

[@jonny5662]

Funny, I have a 346xp and I am going to get rid of it for the ms261. Seems that once you get used to one brand, it’s hard to change to another. The outboard clutch bothers me more than it should. My current go to saw is the ms362

[@nikkiteachout4561]

I love the 261 It just don't fit me like the husqvarna. Its given me no problems it's got about 20 tanks through it. Its really light good power. Just don't feel right in my hands. And exactly ford chevy / kenworth peterbilt. Different strokes for different folks

[@thomasbates4776]

Great Review! I have the new ms261 non-mtronic which starts and runs just like my 23 year old 044 ! Just less to go wrong in the future with the same running as the m-tronic. You can adjust this saw yourself !!! Thanks again for your honest review!

[@OldSchoolMillennial]

Thanks man! You've got two great saws right there!

[@stevengonyaw1617]

I converted my 261cm over to 3/8 bar and chain. Also have the 362,and 400 m tronic. They all have the same 20 inch bars and chains

[@stevenmeyer7107]

The 261 is a great saw, my go to all day saw is 441 with a 25" bar. Great video

[@OldSchoolMillennial]

Thanks, man! The 441 is a good saw too.

[@waynejohnson9855]

462 stihl is what I use most, when I get in wood over 16 inch my 390 husqvarna is what I use as the bigger saw really makes a difference in cutting time.

[@elizabethtaylor9321]

The plastic divider between the engine and carb is a bit of a pain when you want to take the plug out !

[@OldSchoolMillennial]

I haven't had to go there yet on this saw but thanks for the heads up and thanks for watching.

[@julianalderson6996]

Yer love em. Older ones yoused to have stupid built in chain adjuster. Would allways fail n leave chain hangin, an had no power. But times have changed cos that saws got some pull. N light to pick up. Can fell bigger stuff if ya patient n know what ya doin. Yer like it. Just wish had bigger dogs thanx

[@gregwright6565]

Looking at getting the MS261 and had a question. My local dealer said that it is not real good for it if you are doing a lot of light work with it and that it really needs to be pushed hard. Is this true? I use a small Echo CS310 a little every couple of months. Most of what I would be cutting is a lot of smaller stuff, but I do get into some larger mesquite and other central TX woods that the Echo struggles with. I don't mind spending more for quality that will last even if I won't be using it much. I was hoping the MS261 would be fine even if I was using it a lot for lighter stuff, but dealer recommended hanging on to the smaller Echo for the lighter stuff. I'd like to just have one saw for it all. What are your thoughts?

[@OldSchoolMillennial]

The 261 will work great for what you're planning to use it for. I have used my 261 for a while now on all types of trees including mesquite and have never had any issues. As far as not working it hard enough..that honestly doesn't make since to me. I would go for the 261. That's just my 2 cents.

[@gregwright6565]

@@OldSchoolMillennialThanks! That's what I wanted to hear.

[@P.T._aus_B.]

The one thing I guess: the M-tronic may cut the max revolution a little if you do only light work with it to protect the engine. If you cut big logs after that you may feel week performance. But the M-tronic should react to the new circumstances, or you recalibrate it. Greetings from Berlin!🇩🇪

[@dentondunn4346]

Have you considered the Echo CS590 Timberwolf? It's built just like a pro saw, 60cc 4hp, $399 with 5yr warranty. I'd highly suggest checking one out before making the purchase. Best bang for your buck

[@Hundert1]

Is this the newest and most recent redesigned version of the 261 mtronic? I've seen the newest version called the MS261 M-TRONIC 1.1 Who is the best shop that sells them cheapest and nearest to me in New England. THANKS 👍🏼

[@OldSchoolMillennial]

Yes this is the newest version. I would go to the stihl website and find your closest dealer. They tend to all run about the same deals. Thanks for watching. I think you'll be happy with the MS261CM.

[@Hundert1]

@@OldSchoolMillennial Thanks, I spoke with Pete at the Oxford Connecticut Stihl Headquarters. He's knowledgeable and very helpful. This definitely seems like the best saw for my needs. I've been climbing and using the Husqvarna 346xp and 435. The 346xp recently got accidentally smashed by a limb falling so I need a new saw that's excellent and weighs no more than 10-13 pounds.

[@OldSchoolMillennial]

You cannot go wrong getting this saw. The power to weight ratio is awesome!

[@harismalic5632]

This is the best chainsaw for the groundsmen and also for the climber.

[@commiecrusher]

Had my MS260 up against buddies new 261 and we could both feel the extra power in the new 261, even though its not even broken in yet. I just don't know if I like the electronic carb idea...

[@OldSchoolMillennial]

I honestly thought the same thing before I got this saw. However, after run this saw for a good while now, I'm sold on the M tronic technology. I also love the fuel injected 500i, it's a beast.

[@techguy9023]

You can get the 261 with a conventional carb

[@24cupsandcounting]

M-tronic works really well, I have been using it professionally for the last 12 years and it has been flawless.

[@prasannagunarathna3475]

You got a nice pair of boots at the beginning of this video: can tell which brand it is ?

[@OldSchoolMillennial]

Those are Red Wings. I love them! Have been wearing that pair for 9 years and have had them re-soled a couple of times. I bought another pair of the exact same ones last year.

[@patrickkelly8095]

Just get the big top handle saw with a 14” bar and a larger 3 series in either Sthil or Huskie and be done. The top handle will, no pun intended, handle everything the 261 does and then bigger just go bigger. If you can only do one saw then yes, this is good. If you can afford to go with 2 saws which can cover a much larger range then go with my recommendation. It’ll be easier. …. Huskie is a couple hundred dollars less but awesome. Just needs more chain speed due to the teeth they use. I have found the sthil fires up faster too. I have both.

[@billysquibb2389]

I'll take one, I've got a 462 C-M it's a monster. I need one for lapping though.

[@OldSchoolMillennial]

That would make a good pair for your 462!

[@sandycharlton8669]

I just bought a 261 hotsaw it is the perfect match for my 500i. I like the 261 because I can climb tree,s with it and I can fall medium tree,s my 201tc is to small to fall trees and I don,t like climbing with my 046 or 500i

[@OldSchoolMillennial]

That's a great combo (261/500i)! Did Jack work on that 261?

[@sandycharlton8669]

@@OldSchoolMillennialno my little brother bought the saw from a guy who worked at a stihl dealership

[@shanewatts1785]

When he first starting speaking the deep voice threw me, lol.

[@ClinttheGreat]

@Shane Watts Same. Wasn’t expecting that.

[@AshGreen359]

But what's the difference between the 261 and the 261 c-m?

[@OldSchoolMillennial]

The CM is the Mtronic version where as the regular MS261 is just a normal carburetor. The Mtronic adjusts for fuel and air depending on conditions. The regular carb needs to be adjusted manually when it needs more air or fuel. Thanks for watching!

[@jaydee2620]

I so agree A 50cc can do anything not related to very large lumber.

[@White_devil1980]

I have a sthil MS 250 and a zomax chainsaw but I am thinking about upgrading to a sthil MS 261 cm with a 18” bar as sthil is a great well known brand

[@OldSchoolMillennial]

It's a great saw, for sure.

[@davediesel90]

What size bar is on your 261 here

[@OldSchoolMillennial]

This is an 18" bar. I like this size for this saw!

[@melodyricks6217]

I love the smell of sawdust.

[@g.d.7629]

@E OnTheHike No shit!

[@g.d.7629]

IF ITS HICKORY

[@coltonworkman5839]

So far I’ve got a 311 but my next purchase will be a 461 with a 25 inch bar

[@OldSchoolMillennial]

I've heard good things about the 461. Mainly that they have good low end torque. Hope you enjoy that saw when you get it!

[@ryanmaitland1230]

My 461 has great power and torque. A 462 is a lighter option with same power if you don’t mind the m-tronic.

[@browningmaxus5360]

How does it run with an 18 inch bar?

[@OldSchoolMillennial]

18" is my favorite for this saw. I explain more about it in my chainsaw bar length video if you're interested in hearing more about why I like that length. kzbin.info/www/bejne/m6LKimSlndGYqdU

[@bradenmiller3476]

My go to is my MS362.

[@OldSchoolMillennial]

I have heard great things about the MS362. It covers a lot more of the bigger stuff than the 50cc class. Thanks for watching!

[@jamesosekowsky8303]

BUT, will it be as good as the 026....which I've loved for thirty years.

[@OldSchoolMillennial]

I've heard great things about the 026 but this 261 is one sweet saw!

[@budimanpak1555]

Hai mister,,berapa harga senso still ms 261???🤔🤔

[@falconmessenger9136]

My go to saw is 572 husqvarna lol but I'm thinking to get ms261 for bakeup

[@ryanmaitland1230]

I love my 261. It replaced the husky 440 I had

[@falconmessenger9136]

@@ryanmaitland1230 what you think about 550 xp

[@ryanmaitland1230]

@@falconmessenger9136 They are the same power and cc. I remember the 261 having a little more torque lower in the rpm and about a pound lighter. You wouldn’t go wrong with either. Just personal preference/Your local dealer support.

[@falconmessenger9136]

@@ryanmaitland1230 thank you so much

[@darrenwilson7688]

Mine go to saw is a Husky 435 xtorq.

[@connorbowers2035]

My go to saw is an ms250

[@farminindiana7590]

461 with a 28” is my go to saw. I’m 6’2”. So I don’t have to bend over. I can stand up straight and cut

[@OldSchoolMillennial]

That's a great saw! I've heard they have a lot of torque.

[@farminindiana7590]

@@OldSchoolMillennial Yes they are. In smaller wood they aren’t much different than a 440 pulling the same bar. When you get in big wood the 440 has to breathe a little harder

[@dentondunn4346]

Love Stihl brands but my go to saw is a Echo CS590 Timberwolf. Did a muffler mod and tune by Iowa Performance Saw's and it's a beast. Torque monster... Bought a new Stihl 6months ago, wouldn't start and idle correctly and dealership wouldn't honor the warranty before it was even used so very bad experience but had all to do with them instead of the company. When I buy another one new I'm going with the Stihl 400c and from a good reputable dealership. The dealership you purchase from makes all the difference in purchasing one new

[@mmholling87]

What boots are those?

[@OldSchoolMillennial]

These are Red Wing 2253s. I wear them almost everyday.

[@torreyintahoe]

I've run a 25" bar on my 260 with no problem.

[@hk93shooter]

what kills saws is heat. most home owner and farm/ranch saws have a plastic main case that the engine bolts to. there is no where for the heat to go. thats the main difference between pro saws and ranch/farm saws. still good saws but you cant run them that hard.

[@birdman1601]

Great videos! What dogs do you use on you 261c? I see that they are not OEM.

[@johnysilver1853]

What is better MS 261 or 261C-M?

[@OldSchoolMillennial]

I like the 261 CM. I was skeptical before but now I'm a believer in the M tronic technology. Good luck, man.

[@cobracommander2885]

Ive had my ms291 for 3 years

[@jessejames935]

Is it a good saw I’m thinking of buying one

[@cobracommander2885]

@@jessejames935 yes, zero issues. I just put a new chain on it after 2 years and I have cut down and blocked a 70 foot oak

[@jessejames935]

@@cobracommander2885 awesome good to know thank you for responding.

[@llickmogan]

I just got myself the 291 about 5 week ago been great so far put around 10 tanks thru it

[@stevie9361]

Cutting trees that big with my 160. Thought you'd give the 261 little more credit then that

[@davido6915]

Would you rather run the 550xp after running both?

[@OldSchoolMillennial]

That is a tough question. I like both of them for different reasons.

[@ryanmaitland1230]

They are both great saws

[@eugenecrabs3954]

Go-To Chainsaw: McCulloch Mac Pro 10-10 16" 54cc Backup: Remington Woodsman 12" Cut 34cc Extreme Extreme Extreme backup: Homelite 14" Electric plug in EXTREME SEVERE ASS BREAKING BACKUP: Hand

[@OldSchoolMillennial]

Haha, nice! I have a couple 10-10 pros. Those are awesome to run! Great setup!

[@mf6532]

Most popular stihl commercial chainsaw.

[@OldSchoolMillennial]

I can see why, this is a great saw. Thanks for watching!

[@travisprince8783]

194t and a ms362m between them both can get almost any job done

[@ryanmaitland1230]

I want a 194t or a 201t but I’m not sure which one I want. I already have a 261 and 461.

[@evatuckjr9091]

This chainsaw worked well to cut up a pile of cedar logs kzbin.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and stumps. I used it to cut 12"-16" diameter logs and a handful of odd-shaped stumps that were larger in diameter. There was more than enough power even when using 2x100' extension cords. Be sure to use the right gauge extension cord, since you should be using a slightly higher gauge cord than the standard extension cord most folks have around the house. My 2 favorite features of this saw over previous ones I've used are the built-in sharpener and the quick stop after the the throttle is released compared to a gas-powered chainsaw. As soon as you release the trigger, the chain stops spinning immediately because of the electric motor. Standard feature of most of these electric chainsaws, but worth mentioning here for anyone not familiar with it.Bottom line...I needed a chainsaw to get through some backyard cleanup of logs and tree stumps. For the price of renting a chainsaw for a few days, I got this Oregon chainsaw that got the work done, and now I own it for future use.

[@Bamse52]

I had two 026 stihl saws, and if I had not fell a tre on one I still had two 026 saws. They are good saws that last forever. I replaced the smashed saw with a 261 C and expected it to be as good as the old ones. It was not! After 3 years of cutting firewood 261C broke down with crankshaft failure. Stihl told me I was to blame not using Stihls motomix oil. I used shell oil and mixed it 2% as I have done for 25 years with the Stihl 026 saws. This was not good enough for the new Stihl saws Stihl told me. Stihl dont make so good saws any more and my new saw is Husqvarna 550 mark II and very happy with it so far.

[@zackeryeckenrod6549]

husky suck like your bulls--- story that you post on every 261 video

[@gwkemmis]

Have this here in Ireland, mine doesn’t oil well n it’s not a hard wood saw, pine yes. It’s also totally overpriced.

[@dentondunn4346]

I agree

[@davt8615]

Good stuff but your use of the word chainsaw matches the rpm, buy the equivalent husky 👍

[@keaganbarnes1302]

I might be wrong but man I'm pretty sure thats a Persimmon tree not a oak??? Either way I'm here about the 261 not the tree! 261 are great saws and we use them everyday! But I'm really certain that's not a oak....

[@OldSchoolMillennial]

It was a Post Oak. That's predominantly what we have on our property. They look different than a Live Oak or a Red Oak. Gotta love the 261! It's a great saw.

[@alcantrell5340]

Lol that’s exactly my thoughts.

[@Living-The-Dream]

My go to saw is an MS 362C. Trying to figure out a good Truck Saw.....to always stay in the truck. Would appreciate anyone’s thoughts......🔥👍🤠👏 The MS 261 is a great saw IMHO

[@OldSchoolMillennial]

The MS261 is a great saw to keep in the truck! Good grab and go saw.

[@bashdenny1768]

⚡ cutting

[@Ben-oi1np]

10 Schrute Bucks for every “Chainsaw”. Otherwise, decent review.

[@bashdenny1768]

18 inch other day ⚡⚡⚡⚡

[@Karnalzion]

Thank you for great rundown information but your way of felling trees is not good at all and you really should update that skill :)

[@tylergilmore9806]

Good video. But its pronounced 'steel' brother. Well done.

[@OldSchoolMillennial]

Thanks, man!

[@g.d.7629]

Its like schlitz beer whens the last time you drank one of them smoothies??? Taste like shit. My Son drinks miller lite I think that stuff is dot 4 brake fluid. The first few anything are rough but then you hit the your okay phase and its the next day and you feel rough as a cob. I get Biblical Beer hangovers but a great time to stop you need a visa card for 12 pk.

[@dwh5512]

I bought a topline Stihl gas saw and after 3 years it will no longer start. I'd give it away to someone but I like everybody I know.

[@6string327]

It seems Stihl chain saws aren't built like they used to be, I've had a 261 which cost me over $700 (was in and out the repair shop since new) My latest saw is a 291 and I've had it less than two years and needing a new one. It has lots wrong.

[@jbaker4900]

If it's not starting odds are you're the reason why. Dump the gas out, and put 91 octane 100% percent gas back in. If that doesn't work take it to the dealer.

[@dwh5512]

@@jbaker4900 wrong dink. It won't run on Sthil's pre-mixed fuel either. Chances are if a comment here makes no sense you the dope that wrote it.

[@johnscroggins5981]

@@dwh5512 you're gay

[@MaskMasterEsquire]

Chainsaws are confusing. I'm no expert but I'm looking for a saw at present to sort out some serious work. Problem I have with Stihl is that I have heard nothing but bad things about their more recent saws.

[@OldSchoolMillennial]

Speaking from experience, I have not had any issues with Stihl. But if you aren't sure about Stihl, Husqvarna makes a 550xp that is comparable with this saw. What it often boils down to is what kind of dealer support you have in your area. Thanks for watching! If you like chainsaws, check out the chainsaw playlist on our channel page. Best of luck! Let me know what you land on.

[@MaskMasterEsquire]

@@OldSchoolMillennial Thanks for that, appreciated. I'm probably going to grab an Echo....I've heard good things about them. You are definately correct about dealer support. I'll let you know how I get on.

[@green-zone36]

Just to possibly help with your choice of saw. I have both 550xp and the ms261. I had trouble with the 550xp right out of the gate. Husqvarna was a while sorting it out but used me good and the 550xp works good. Never had an issue with the ms261 but I am confident that Stihl will stand behind their products. I use the 550xp more than I use the ms261.

[@patrickhayes3416]

Hate the "sippy caps" on Stihl...any other brand is superior design

[@joshauamcdevitt7998]

do not drink when every time he says chain saw....you will be plastered

[@OldSchoolMillennial]

If you're into the MS 261, I have a playlist all about it. Check it out here. kzbin.info/aero/PLJjXJCzHs0pPTSaa37K8AY7Wuo9IFp3Be. Check out my long-term review here: kzbin.info/www/bejne/fn6bh6x9j8ipZpI

[@g.d.7629]

Dont make me go get one!!!!! I even told my nephew if we got another stimulus check Id get one. I just cant get past the orange and white layout. Looks 100 yrs old. Stihl wont change colors for any reason whatso ever. My main 3 reasons for not buying are I hate the gay white bar, I hate the oddball .063BS screws to remove top and stihl gave me a good prostate exam yrs ago. Im an educated retired mechanic and know 2 strokes too.Oh and number 1 turnoff is the matel plastic handles. Yes I hate stihl its that simple. Sorry but thats the way I feel.Thee colors and handle need changed as do the plastic handles. On dirtbikes they use 1 ring because it causes less drag 60,80,125cc 250 has 2 rings.

[@OldSchoolMillennial]

Hahaha! Thanks for watching, man!

[@g.d.7629]

You get 261 or 271?

[@user-xe4gb7nr9m]

We’ll just stop the world so you can get off!

[@g.d.7629]

This is a nice guy but obviously has plenty of cash. 271 is about worst stihl you can buy for weight. 291 is about same and stronger but heavy too.

[@todd8155]

Good content; however the presentation is horrible with you saying "uh" once or twice per sentence. This makes it unlistenable to me after a few minutes which is a shame because like I said you have good content. A good way to get rid of your uhs and uhms is to talk in front of someone, and they have permission to raise their hand every time you do it. I'm not saying this to be mean, but to give you some honest feedback so that you can up your game and be more successful. Just go back and listen to this video and you will see what I mean.

[@tilenpapuc8452]

Don’t just don’t

[@martinmair8608]

Husqvarna 550xp mark2 is better

[@OldSchoolMillennial]

Check out my versus video if you haven't seen it yet.

[@g.d.7629]

Its medeocre at best.

[@benscott2743]

speeding up the video does nothing for me - I need to see the speed the saw goes thru the log in REAL TIME so I can compare thanks