The Ruckus Is Finished - Gy6 Swap-

[@Sanchizle]

Just saw this Build in person yesterday and you are one of the best in the industry. Great build. Hats off to Burn out Bobby on quality work!

[@burnoutbobby]

Man that’s greatly appreciated! Glad you were able to see it.

[@king0dasouf]

Yo Bobby you are the man. Guys like you really help the rest of us a whole heap!!! Happy new year. May you be blessed with amazing good fortune this year and many more. Thank you for your hard work and the knowledge you share.

[@burnoutbobby]

Thank you. I greatly appreciate the feedback and try to do what I can to help the community. Happy new year to you and I wish you the best!

[@Silverballs00]

Great finally build series video. This bike is absolutely beautiful and clean!

[@burnoutbobby]

Thank you!

[@coolshariq]

Amazing job bobby your work is just absolutely beautiful 👍👍

[@burnoutbobby]

Thank you. That is greatly appreciated

[@r21_d21]

Without a doubt, the cleanest I’ve seen in a while 👍🏼. Nice work man 💙..💙 Merry Christmas 🎄

[@burnoutbobby]

Much appreciated brother!

[@KyleAndersonSkates]

Burnout Bobby blessing us for christmas lets gooooo

[@burnoutbobby]

Had to do the Christmas drop!

[@TheErnestoq]

Can't wait to build my 2022 ruckus thank you for the videos my brother 👍🏾💯🤙🏾🤪

[@burnoutbobby]

Have fun with it man. It will be a great project.

[@alexdelisa6817]

I am falling in love with these machines my busa and bmw 1000 are going to start getting jealous lol love ur work keep up the great work.

[@burnoutbobby]

Thank you. Both your bikes are beautiful machines! Great choices.

[@vwfreshness459]

Ok, first of all that bike is awesome. As for the parking lot drags I'm almost tempted to load up my bikes now and roll to Tampa. Ryan, I really think your next build should be a bike that gets debuted at the Small bore Rally. Merry Christmas

[@burnoutbobby]

Thank you. I would but I’m not going to the rally this year unfortunately

[@vwfreshness459]

@@burnoutbobby Yeah, your gonna have your hands full with little man on the way.

[@burnoutbobby]

Yes that’s right or I’d be cracking on my new build for sure.

[@aaron1984ish]

Brother you are amazing at this! I came in Tuesday with the green ruckus. Once the battery boxes are back in stock I would love to see if you’re available to make mine push start, and possibly see what we can do to make it run smoother. (And a few other little thing lol)

[@burnoutbobby]

Yeah for sure we can make that happen

[@andyproctor3588]

Honestly who could ask for anything more that thing is beautiful I ordered the ncy fan from you guys at The Ruck shop and yes I got it in Orange I know most people don't do that very happy with it enjoyed the video on Christmas Eve

[@burnoutbobby]

The orange one is a classic. Merry Christmas!

[@georgek1954]

gorgeous build, excellent work!

[@burnoutbobby]

Thank you!

[@BRXTHER-X]

Great channel! I got a Yamaha jog black 49 cc. Held together with duct tape and hot glue. Still my daily driver but I’d like to freshen it up. Any suggestions? Where is your shop?

[@burnoutbobby]

I don’t have anything for that bike but I’d suggest scoot swap shop for your model.

[@onehappyoldgoat7124]

Do you do modifications for other people's scooters? I have a maddog 150 chuckus I would like some things done on but I have parkinson's and don't have the ability to do mechanicals

[@burnoutbobby]

Yes I do. I believe we just spoke on Instagram. I will keep in touch.

[@forrestcrabbe]

🤘🍻🤘

[@thewheycast9304]

hey i live in zhills near the airport im gonna buy a ruck soon im excited

[@burnoutbobby]

That’s what’s up! You’ll love it

[@rainnyherrera699]

hey builds looks amazing 👏 , where did you get the carbon fiber wing thanks

[@burnoutbobby]

All the parts were from the ruck shop.

[@jbamerican_usnavy]

Do you need a motorcycle endorsement because the conversion changes the 49cc?

[@burnoutbobby]

About 99% of people who do the swap do not get a license for motorcycle as the frame is what is register and not the motor so it stays registered as 49cc.

[@yohvh]

Damn this thing would be sick if it's electric. Imagine the torgue and drag power of this shape on a 14KW motor

[@burnoutbobby]

For sure!

[@jdmxvong]

crispy clean!

[@burnoutbobby]

Thank you mr Vong

[@Kawaties1977]

this is a clean build..... wheres bobby at ????????

[@paulb2769]

Hi Bobby... What brand of rear tire is that? I need to replace the rear on my Zuma 125. Stock tire is a Kenda 130/ 70 / 12. I got 4K miles out of it. What would you recommend ? Thanks much, Paul /

[@burnoutbobby]

You can do a Michelin power pure in the same size. That’s what’s on this.

[@danielvasquez3035]

Is that 3D print stage6 gas gauge housing for sale on the website?

[@burnoutbobby]

It is not. It was a one off item that was made for me.

[@jesusmejia2126]

Dope 🔥🔥🔥

[@burnoutbobby]

Thank you

[@buffalorevolver6473]

Beautiful bike

[@burnoutbobby]

Thank you

[@jaseym6]

so how much would something like that cost?

[@burnoutbobby]

6-8k

[@jomarimperial9589]

how much well be cost all of that?😅☺️

[@burnoutbobby]

Probably around 8k

[@dannyboii5296]

Do you have any bikes for sale? I’m in Orlando FL

[@burnoutbobby]

Not right now sorry

[@ORIGINALCONCEPTGARAGE]

Merry Christmas brother

[@ydiddyje]

I am trying to get more info about the Weight capacity I am 6 foot two is there a way for it to be bigger lifted because I would love to get one of these so if you could share that information it would be great

[@burnoutbobby]

Yeah we have guys that are 6’5 riding these so you are good. One of my co workers is 350lb and his does 75mph. It’s all doable with these. Just have to make adjustments to suspension and seat to get it to your comfort.

[@ydiddyje]

Great thanks so much is there a way for me to buy It’s already customized to how I like

[@burnoutbobby]

That may be hard. The best thing to do is find one done similar and then make adjustments to it. You save a lot of money that way. You can find them modified on Fb marketplace.

[@ydiddyje]

@@burnoutbobby ok I have pictures of what I want where are you located out of I leave in Seattle I may be able to find people that build here but I am willing to pay for what I want summer is almost over but I would love to have one ready for the summer of 2023.

[@ydiddyje]

@@burnoutbobby if you have a email and time I would love to send you what I am looking for and maybe get some Ideas

[@Nuyorknetwork]

If I wanted to order this kit. How much I spent?

[@burnoutbobby]

What kit?

[@rachelmurphy6473]

This looks like ‘if you have ask, you can’t afford it’ but I really want to know what this bike cost

[@burnoutbobby]

If you look in the comments I’ve answered it a bunch of times. It’s all based off budgets

[@5646jt]

Where does fuel check vulve go on before the carb or before the fuel pump

[@burnoutbobby]

After fuel pump before the carb

[@5646jt]

@@burnoutbobby thank you for the information

[@5646jt]

Congratulations on the new member to the family soon

[@burnoutbobby]

Thank you!

[@alessandropuleo5254]

motori 🏍bravo 💯💯💯🏆🏆🏆🏆👌👌👋👋👋👋👋👋👋👋👋💪💪💪👋👋👋 hi ciao ola hello 😉😉😉🤩🤩🤩

[@hoosierbullionbuddy8977]

Do you have any for sale?

[@burnoutbobby]

I do not. Sorry

[@gimzgomez5195]

where did you buy the eye headlights? the ruck shop dont have that anymore.

[@burnoutbobby]

The oem headlights came on the bike factory.

[@gimzgomez5195]

@@burnoutbobby do you know where i can get one?

[@burnoutbobby]

You can order them at any store that sells oem Honda parts like partzilla.com

[@gimzgomez5195]

@@burnoutbobby ok thanks. did u bought the rims and tires at theruckshop? if yes are they the one who put tires already?

[@burnoutbobby]

Yes all the parts were from the ruck shop. No I had a tire shop mount the tires.

[@qwayvodog]

What was the total cost to build it?

[@burnoutbobby]

8k

[@ORIGINALCONCEPTGARAGE]

YEAH TELL HIM HES GOT TO GO THROUGH BOE'S LUKIN DUKE FIRST LOL SORRY COULDN'T HELP MYSELF WHEN YOU THE DUKE AS I'M DOWN LETS MEET IN TENNESSEE THIS SUMMER AS M.R. ORIGINAL CONCEPT GARAGE WILL BE AT SMOKEY MOUNTAIN SMALL BORE RALLY OUR TEAM ARE LOOKING TO PROVE OURSELVES!

[@shanepalmer9345]

Merry Christmas 🎄

[@burnoutbobby]

Merry Christmas

[@shanepalmer9345]

@@burnoutbobby thx bro man I would like for you to build me one just like that but different color what’s ballpark on how much that cost for this build

[@burnoutbobby]

Roughly 5-6k parts and labor I’d say

[@shanepalmer9345]

@@burnoutbobby damn ok bro thank you

[@burnoutbobby]

You’re welcome.

[@luisnmayrarivera8719]

Can you build one for me?

[@burnoutbobby]

I cannot. Sorry.

[@nicholasventura4107]

Total cost parts

[@burnoutbobby]

Probably 5-6k at least

[@nicholasventura4107]

Total cost on parts

[@burnoutbobby]

5k