Burnout Bobby

Пікірлер

@ImKoshi 23 сағат бұрын

Can anyone thats taken apart the newer model explain how to split the case? Ive wedged tools into this thing and pulled as hard as i can and have made 0 progress

@burnoutbobby 22 сағат бұрын

Have to heat it with a heat gun to loosen up the glue they use

@WarriorSlayer1190 Күн бұрын

Had the same issue and your fix worked perfectly! Thank you bro!

@scordova951 3 күн бұрын

After cutting the spring and I put it back in, do I fill it with oil all the way to the top? Also, would I be able to take an inch and a half off or is that too much?

@burnoutbobby 3 күн бұрын

The oil in it should still be good and try an inch first to see if you like it. Ride it around and let it

@burnoutbobby 3 күн бұрын

Break in

@scordova951 3 күн бұрын

@@burnoutbobby can this be done on my stock Maddog shocks? 🤔

@burnoutbobby 2 күн бұрын

@scordova951 not sure. I have never seen them before. If it has a screw on top then I’d assume so

@apleatherworking9952 4 күн бұрын

Wish I had known about this video when I swapped my metro to a ruck motor

@burnoutbobby 4 күн бұрын

Sorry I was late to the game

@apleatherworking9952 4 күн бұрын

@@burnoutbobby I didn't even know you had a channel bro a post in the ruckus 2.0 group brought me to your KZbin channel 🤣 and speaking of I'll message you about that stock wheel here in a little bit

@burnoutbobby 4 күн бұрын

Shoot me a message on fb. Got you.

@BrianaHapenovich 7 күн бұрын

There’s no screw there

@burnoutbobby 7 күн бұрын

You have the newer model. You have to split the case and remove the top

@dannydillon997 8 күн бұрын

Masterpiece 🙏

@Treavan-n3p 10 күн бұрын

Thank you so much for this video 😊you just saved me, i bought this like a month ago and used it twice .......now baby is sick a again took it out and it's not suctioning but ur video made me fix it ❤thank you so much🤗

@burnoutbobby 9 күн бұрын

Hope the baby gets better!!

@Treavan-n3p 5 күн бұрын

Thank you@@burnoutbobby

@bryanlucatero01 11 күн бұрын

You're the man bro, thank you!

@aloysiusalex8065 14 күн бұрын

Hi brother, from India. I have the fuelx pro fitted to my duke 390. Recently i put a bmc air filter and removed the baffle or the db killer. I instantly noticed a loss in back pressure and vehicle stalling a lot, even with a richer map. Do you think getting the powertronic ecu would fix this problem? Would really appreciate your suggestion. Thanks

@burnoutbobby 14 күн бұрын

Yes you may have to get the ecu to accommodate that.

@DeDekMona-b2w 17 күн бұрын

please answer! what is the size of the front and rear rims? thank you

@burnoutbobby 17 күн бұрын

12x4 and 12x8. Standard size you go to when swapping the ruckus.

@DeDekMona-b2w 11 күн бұрын

@burnoutbobby ok, thanks

@user-we3jw2iz7u 20 күн бұрын

This thing sucks and I wanted to leave a review on Amazon and can’t even find it anymore

@burnoutbobby 20 күн бұрын

Yeah we went with a different brand and it’s been solid for 3 years now

@user-we3jw2iz7u 18 күн бұрын

@ the fix didn’t work for me, but it was a very detailed video! I think mine was rusted or something idk.

@burnoutbobby 18 күн бұрын

@user-we3jw2iz7u you can email them and they will warranty it from what I’ve heard. Personally we switched to a different brand since this was all problems.

@sharatcoolkarni6588 21 күн бұрын

Where did you find the handle bar?

@burnoutbobby 21 күн бұрын

Local shop

@ricklawrence3052 21 күн бұрын

Greetings from 2025 -- this worked like a charm, thanks to your easy to follow, thorough video!

@billionaireboy2694 24 күн бұрын

skkkiiinnny ahhhh head 😂😂😂😂

@dannycallentine9791 24 күн бұрын

They just ought be glad is not carbureted and cold hearted, so you gotta give it the pipes to ensure it'll keep runnin

@jenniferle7005 24 күн бұрын

i know this video old what did you set the cylinder head temp too and the danger?

@burnoutbobby 24 күн бұрын

Over 300. Can’t remember exactly

@jenniferle7005 24 күн бұрын

ok cool thank you

@Nowyoullneverknow 25 күн бұрын

Ironically that the sound the car be making too lmao

@billionaireboy2694 25 күн бұрын

whats the puppets name ?

@burnoutbobby 24 күн бұрын

Pepe the shrimp

@theSatanicNaturalists. 23 күн бұрын

Eddie from Ed edd n eddie

@El_Bozo-bo7co 27 күн бұрын

nah this is way to specific

@oneil732012 28 күн бұрын

What are the size cable needed for the stretch?

@burnoutbobby 28 күн бұрын

All depends on your handlebars used.

@hahadarrie 28 күн бұрын

I got this and noticed snot leaking into the motor chamber after one day of use. I will send this back and stick to the OG

@burnoutbobby 28 күн бұрын

We went to the littletora one and it has been solid for 2 years

@JDWURKS 29 күн бұрын

Copy paste ah build lol

@andyproctor3588 Ай бұрын

Been there and tried that lol

@burnoutbobby Ай бұрын

Hahahaha!

@Akac3sh Ай бұрын

lol this is pretty badass upload more bro

@micah.80665 Ай бұрын

Amazon showed this would work on my 2024 Duke 390. It did not. I had to rig it to work. The mounting plate was too long to fit between the gap where my fender came off so I had to cover the hole with tape. Luckily u can’t see it. Then I had to use extra long bolts to reach it. It’s good for now but I’ll def get another one later.

@micah.80665 Ай бұрын

I just got a 2024 390. There are no options for one of these, besides one on eBay for $300, and it has mixed reviews.. any idea if any other model or year would fit mine? I’ve been searching non stop and I can’t find one. It’s like this for all the accessories. Not much out there yet 😑

@burnoutbobby Ай бұрын

I’m not sure. I haven’t looked into the new models

@noahchamp8342 Ай бұрын

What your top speed

@gregmartin3554 Ай бұрын

Hey bobby,I have a vento 150 that I'm building. How did you delete all the buttons on the dashboard? Where did you get the handlebars and the adapter to mount to the triple tree fork?

@burnoutbobby Ай бұрын

I just unplugged and got rid of them all. The handlebar was from the ruck shop and the stem was also from the ruck shop as well. It was their oem stem adapter.

@gregmartin3554 Ай бұрын

Just unplug? How about the starter?

@burnoutbobby Ай бұрын

Yeah I just wired in a start button that’s all

@joshuasalisbury789 Ай бұрын

How much angle have u got in case I wanted to hide my plate in pictures or at bike meets

@burnoutbobby Ай бұрын

You don’t get enough to do that unfortunately without bending the plate

@ShaunNewton Ай бұрын

This fix didnt' work for me unfortunately, but thank you for the video! I'm sure it's helped others :)

@the88thdarcstar Ай бұрын

Much appreciated

@MrCheech0508 Ай бұрын

What paint did you used o the plastics?

@burnoutbobby Ай бұрын

None. The plastic can be ordered this color from Bebe motor supply

@MrCheech0508 Ай бұрын

@burnoutbobby ok thanks

@kasandragarcia8219 Ай бұрын

Not sure what I did wrong. Followed the steps and I feel a suction, but it’s not strong at all.

@ImshaOssama Ай бұрын

Can I use WD40 ?? Cuz it’s all rusty

@burnoutbobby Ай бұрын

That’s what I use

@ImshaOssama Ай бұрын

I did the same thing but it’s still not working and giving that beep sound.

@burnoutbobby Ай бұрын

Is it spinning freely

@scootersonlyrepair Ай бұрын

Gy6 swaps are retarded. Why would anyone spend thousands on a ruckus, making it look good only to remove the super reliable Japanese honda engine and put on a pos Chinese gy6. Then spending even more to make it faster. If you really want to make a ruckus faster, get a big ruckus 250cc engine or at least an elite 150 engine. Or if you insist on a brand new engine, but and strip a navi. The 110cc engine goes 60mph stock

@scootersonlyrepair Ай бұрын

I just got an icebear maddog 50 and I'm going to swap in a stock metropolitan engine.

@priyadarshini8215 Ай бұрын

This is a great video! I took off the sticker but there is no screw there 😢 I saw your description for new models to take the top off, but how? I tried twisting, brute force. Not sure what’s the mechanism to get it out. Would you kindly make a video on how to take it off? The whole parental community would be grateful to you! 🙏

@burnoutbobby Ай бұрын

I would have to buy one if the new models. I will see if I can order one.

@LiNdS98 2 ай бұрын

I took the entire blue sticker off and there was no screw

@burnoutbobby 2 ай бұрын

Go to video description

@JasminePhillips-i4r 2 ай бұрын

Thanksgiving Day lifesaver! Thank you for this video!

@burnoutbobby 2 ай бұрын

You’re welcome. Hope the little one gets better!

@alliegibson3974 2 ай бұрын

Mine did not have a place to unscrew after you peel it back

@burnoutbobby 2 ай бұрын

Read video description

@Nothin9Specific 2 ай бұрын

You’re the man bro. I opened mine and found that the last two Phillips heads were rusted out and I couldn’t spin them. It was all rusty inside. I was still able to spin the shaft with that tri piece and get it to work. My daughters only 11 months.

@burnoutbobby 2 ай бұрын

Glad you got it! Hope she gets better soon

@jackrabbit2765 2 ай бұрын

Also how In the hell did you find that screw??😮😮

@jackrabbit2765 2 ай бұрын

Thank you, thank you, just like you, used it about 3 or 4 months and worked great, now it doing what you said high pitch noise.

@t-bone3657 2 ай бұрын

Not worth the $$. You can buy a Chuckus 150cc with all the mods for around $2k plus tag & title. This is 11/2024 🎉

@burnoutbobby 2 ай бұрын

And you won’t be able to do half the mods, wiring will fail and motor won’t last as long. 11/18/24

@whitneyaw825 2 ай бұрын

This was amazing! Thank you for the easy to follow video - saved us!

@burnoutbobby 2 ай бұрын

You’re welcome. Hope your little one gets better soon

@colleenkleven7182 2 ай бұрын

Oh my god thank you for this video!! Watching this helped to to figure out why my electric nose sucker kept spewing snot out the little hole in the back. Turns out there was very thick snot stuck in the tubes. That was so quick and easy to fix. Thank you soooooooo much dude!!!

@burnoutbobby 2 ай бұрын

Glad it was helpful!!