stock h22 turbo gets tuned and it made..... | how to turbo your honda Prelude pt5

[@wolfsargent4469]

Just rewatched the whole series since I’ve been doing research on my build! Always cool to see updates

[@treybedipping1734]

Yea bro I'll have a full breakdown once the build is done.

[@PatrickAntiArrhythmicKerce]

Love the H22/lude content. I helped my buddy put together and install a turbo kit on his 5th gen. We were able to keep p/s and a/c with a log manifold. Obviously a log mani is not as efficient, but for low boost on a stock block it worked well.

[@iidrippykingii]

@patrickantiarrhythmickerce. What log mani do you guys use ?

[@dr0zieej262]

I like the cast iron log mani's. I feel like the exhaust gases are more direct instead of the ram mani

[@ludelife3962]

Your wastegate came stock with a 7lb spring. It's not the wastegate restricting pressure. It's the boost controller. The vacuum line on the turbo needs to just get capped and then run a vacuum from the wastegate to the intake manifold.

[@treybedipping1734]

Wastegate came with 3 different springs. The boost controller worked fine. Lol I'm not new to building cars. You might want to double check your set up if that's how your running your car.

[@ludelife3962]

Naaaaa your showing that h22 only got 205hp with 8lbs of boost? Dude my f22 is at 250hp at 8lbs. There's no way that setup is right.

[@treybedipping1734]

@@ludelife3962 it only made 5 lbs and its an awd dyno add 10-11% for the correction

[@ralphruano7799]

Sick , I been wanting to do my stock h series turbo but i doubt my stock ringlands , but this is giving me hope . Can’t wait for the next vid!

[@treybedipping1734]

Thanks for watching bro

[@nicholassantos2327]

Nice man, reliability is important. Is champagne gonna be a daily?

[@treybedipping1734]

Yezzir that's the plan

[@darbymcbride41]

;)

[@differentgroove1]

Ohhh yesssss Bro ! she sounds soooo nice !! Can't wait to see more on this build.

[@treybedipping1734]

Thanks bro 🙏🏽

[@whitealpaca4791]

I have jun high lift cams, adjustable timing gears, titanium valve springs and retainers, bronze phosphorous valve guides, sleeved block, bearings ,rods and prisons with no turbo, I never got the Honda data, stage 2 clutch, lighten fly wheel, deleted balance shafts, I always wanted to tune it/get the cpu but times are hard lol . 95 Honda prelude h22 from Toronto

[@frias2287]

Nice one bro🔥

[@desoulate4765]

Sounds like you going for a nice build bro. It’s a lot of folks not trynna go crazy, but, trynna improve for the sake of like you said dependability. Hoping to learn from this one 👀

[@treybedipping1734]

Facts This is Pt 5 bro if you missed the first 4 parts go check em out

[@mikeybee4358]

Hell yeah man, can't wait to see pt 2!

[@treybedipping1734]

You need to come see it in person lol

[@mikeybee4358]

@@treybedipping1734 for sure bro. I’ll drive my lude up there!

[@Carreras_Performance]

I did 289 on 10 12 psi... Yours can do a lil more

[@whatta7793]

Where you from bro? I'm in Virginia, need someone who would help me boost a lude 😂 nice job on yours broski

[@treybedipping1734]

My shop is in Fredericksburg va

[@keecamp3706]

Where do you get your manifolds made? Been looking for one so I can turbo my prelude

[@treybedipping1734]

This one is made by 850fab you can find them on facebook

[@isaachunnids]

Fire

[@treybedipping1734]

🙏🏽🙏🏽🙏🏽

[@AJIMPORTS]

she sounds good. nice clean pulls. why you did not get a Mac valve for the boost control.

[@treybedipping1734]

I was being hard headed lol

[@grownnotflown2]

All the Boost!

[@treybedipping1734]

Lmaooo

[@whitealpaca4791]

230 is a good number

[@darbymcbride41]

Probs not the first to ask. What turbo header?

[@treybedipping1734]

850 fab

[@HonuraHomies]

Hey man, I’m thinking abt like how the manifold is, do u know the dimensions, or would I just give it to a fab guy and tell him to make it so it fits ps and ac

[@treybedipping1734]

Nah I don't bro but you can search up 850fab that's who makes it

[@HonuraHomies]

@@treybedipping1734 thanks man, love ur prelude so much, made me wanna turbo my 5th gen

[@ludelife3962]

Im just gunna tell you right now that you don't want a boost controller with that low of pressure. That's why you spent money on the wastegate, the spring regulates the pressure. I got a boosted 4th gen f22a1. It's been boosted for over 6 years. Your h22 should sound way better than that....it's not getting into boost like it should.

[@DT_JoLa]

Yeye🔥🔥🔥

[@killingmachine9193]

hp?

[@treybedipping1734]

Next video bro

[@dr0zieej262]

What ignition cables are those? Ive been wanting to upgrade my Hseries ive recently aquired. Im new to the H series motors. Im usually a D series boy lol

[@dr0zieej262]

I have a RHD ej1 with the H series. Literally no room so im thinking boost is out of the question going to keep it all motor. I fell in love with these torque monsters 😅

[@jesusdeeez370]

Noiice but if you’re gonna pay for a tune you gotta get that hood latch 🤣

[@treybedipping1734]

Hood latch or hood prop?

[@jesusdeeez370]

@@treybedipping1734 what ever works 🤣

[@accordingtoabe2211]

🔥🔥🔥🔥🔥

[@terrenskymoore7293]

Bro where did you get the h22 motor from?..I need one for my prelude my block destroyed

[@treybedipping1734]

They are getting harder and harder to find to be honest. Best bet is look on fb market and find a motor or find one and rebuild it

[@rrmedia6730]

Hey man wantin to do stock with turbo. Engine builder more or less called me an idiot as he wanted 8k to build. Engine out and brought to him Thoughts?

[@treybedipping1734]

It all depends on what your power goals are. If your only looking for 280-320 stock is fine with good tune. 8k seems a little steep. If you do a closed deck motor you can just do rods and pistons for like $2500 or less

[@rrmedia6730]

@@treybedipping1734 thanks Trey. Just wanting a lil something more with a blow off valve to hear

[@peach4855]

should i 2jz my prelude

[@treybedipping1734]

Would be dope

[@vitorio1001]

Coold

[@joshuayammer1994]

How do u keep ur gas/ temp going

[@treybedipping1734]

I've had to swap a few in over the years

[@sil-zk8061]

Acl bearings holding up well?

[@treybedipping1734]

This is a completely different car and motor bro

[@sil-zk8061]

Oops lol

[@treybedipping1734]

@@sil-zk8061 🤣

[@ZRIEST]

Do you have Instagram? Can I dm you ? I have a few questions

[@treybedipping1734]

Yea bro Its in the beginning of the video