Which Festool Router ?

[@michaelvila3692]

5 years later and it's still the best Festool router comparison video on KZbin.

[@NewBritWorkshop]

Hi Michael, I wish someone would tell Festool UK - they don't seem to want me to make any videos of their kit any more. Cheers. Peter

[@michaelvila3692]

@@NewBritWorkshop That is very strange Peter, did they give you a reason why?

[@NewBritWorkshop]

I have heard nothing from them. I still use my Festool kit, I still believe most of it to be the best on the market and I would love the opportunity to play with some of the new stuff. Cheers. Peter

[@pedrosoto1253]

Thank you so much for the review. A few days ago I ordered the MFT3 table and the OF1400, it took me a month to take the decision and I can't wait for it to arrive. Actually I'm paying a lot of attention to all your videos and reviews cause I'm setting up my own shop, and for an amateur like me your reviews are just PERFECT. Please keep up the great job Peter, and I want to wish you and all your loved ones a Very Happy New Year.

[@NewBritWorkshop]

Pedro Soto Hi Pedro, Very many thanks for your support and kind words. Good luck with your new purchases. Happy New Year. Peter

[@Snaerffer]

Easily the most helpful review I’ve seen. Thanks!

[@NewBritWorkshop]

Glad it was helpful! Cheers. Peter

[@BoranTheki]

I bought the 1400. So far so good. The dust collection is stunningly delightful. I made a 4' x 8' festool style workbench top using 3/4" mdf. 325 or so 20mm holes and zero cleanup. Using a router is once again a pleasure.

[@NewBritWorkshop]

+Boran Theki Hi Boran, Excellent. Well done. Peter

[@tworiversworkshop6111]

Very comprehensive review, thank you very much for another quality video.

[@NewBritWorkshop]

Thank you very much!

[@SuperAlfaDogg]

Definitely the 1400. Takes both 1/4" and 1/2" bits. Easy to handle and plenty of power. Almost never use really large bits. I use a shaper or router table for much of larger projects.

[@NewBritWorkshop]

Well done. Peter

[@Velvaruz]

Hi! Another great overview! Thank you! I have of1400 for a year and I'm using it for a raised panels. When the router placed in my cms-of I can set the bit which is wider than a router mouth from the top of the table. Just lift your router up and you'll be able to reach the collet and insert the bit. You have to be careful setting the bit depth, you must lower the router speed. Maybe it's dangerous but it works.

[@NewBritWorkshop]

Velvaruz Yes, it can be done. I would use a piece of MDF with a cut-out for the panel raising cutter and held firmly on the top of the CMS. This means that the bit can spin without risking any damage to the router body or CMS insert. It is essential that the router cutter is properly held in the collet and the speed has to be kept low. I have the OF 2200 in my CMS unit and so panel raising is very easy. Many thanks for the kind words. Peter

[@dgw07]

Good Routers , I have the OF1400 and owned it for some years . Its a very capable machine ,...but beware ...I discovered while cutting a worktop on a mitre jig it produced a slight wave on both male and female cuts . I then used my Makita 3612C Router on the same jig on a few test items of worktop and the results were near perfect . On inspection the OF1400 Guide bush has slight play when inserted in the router . For the price its still a good router with many features but for better results on wortops its the Makita 3612 C beats it hands down

[@NewBritWorkshop]

Hi Davie, I use the Axminster guide bush set and they give perfect results. Cheers. Peter

[@dgw07]

@@NewBritWorkshop Thanks for the info Peter . I have the UJK Guide bush set but unsure if there is an adaptor plate to fit the OF1400. Great videos by the way , I am fortunate to own a few Festool items and always look out for your very informative and in depth videos .

[@NewBritWorkshop]

Hi Davie, Yes, the adapter is available from Axminster: www.axminstertools.com/leigh-guide-bush-adaptor-for-festool-of1400-493566 Cheers, Peter

[@dgw07]

@@NewBritWorkshop Thanks Peter

[@anatoliyalvari7481]

Thank you Peter for great comparison and deep explanation about every router! Would be fine if you can also add into comparison OFK 700 and MFK 700 and provide us recommendation about where and which router to use!

[@NewBritWorkshop]

Hi Anatoliy, I will add those two routers to my next list of kit to borrow from Festool. Cheers. Peter

[@stevengorton6858]

Very good video on selection of router capabilities

[@NewBritWorkshop]

Steven Gorton Hi Steven, Many thanks. Peter

[@avetwithptsd2919]

Just got my first Festool yesterday orbital sander, man I am hooked and want them all now.

[@NewBritWorkshop]

AvetwithPTSD That's how I started - good luck. Peter

[@avetwithptsd2919]

New Brit Workshop Thanks for the reply. do you have a piece on the Domino Jointer's? I am trying to fig out if I want the router next or the jointer. Just getting into woodworking so just doing small things.

[@NewBritWorkshop]

AvetwithPTSD There are countless appearances of the Dominos in my various construction videos. One of my earliest series of videos (3 years ago) featured the DF700. I think that perhaps it is time for me to do a comparison of Dominos video just like the video showing the 3 routers. Peter

[@avetwithptsd2919]

New Brit Workshop Yes I think it is. Also would like to hear your thoughts on the HL 850 planer and the diff heads it offers. Just like hearing other peoples reviews before I buy something.

[@NewBritWorkshop]

AvetwithPTSD I do not have the HL850 but I did try one at a show and also have seen it in the hands of a Festool demonstrator - it really is a nice bit of kit and, as you would expect from Festool, it is beautifully made. The different heads are very neat but not cheap. I particularly like one that created a finish similar to an adze. Peter

[@shinrah4772]

Good review as always, and also a happy new year to you. I bought the OF1400 a couple of months ago after your review wiped away my remaining doubts. I have done quite a variety of work with it, from mortising 30x50mm 100mm deep with a template to common edge work and the OF never let me down. It currently sits in an Incra LS router table with a Jessem Lift, and does a perfect job there. The attachable dust collection completely seals the router with the table. This is especially great when grooving because the usual table extraction from the side cannot catch that dust. I have yet to try bigger cutters like the mitre cutter you showcased a couple of weeks ago but I´m confident the OF will have enough power for even those.

[@NewBritWorkshop]

Shin rah That sounds like an excellent setup. The OF 1400 is a very versatile router and will be the primary machine for many people. Many thanks. Take care. Peter

[@nippychippy]

Thanks for the review Peter i bought the of1400 on your advice last year it is amazing easily does kitchen and the dust extraction is amazing my next one will be either the of1010 for smaller work and the lr32 system. Or the ofk 500 or ofk700

[@NewBritWorkshop]

nippychippy Hi Robert, Yes the OF1400 is brilliant but then they all are. I am looking forward to making the OF 1010 video - it is a sweet little router. Cheers. Peter

[@Terry8238]

Hello Peter I have now watched this video about 10 times to see which router I need for my type of work. Drum roll please ..... I've gone for the OF 1010 for all my bench top work . And the OF 1400 for my router table. All it was ,, was a flick of a coin , heads OF 1400 tails OF 2200 , dam that double headed coin. I am of to N&B tools to pick up my new toys tomorrow.

[@NewBritWorkshop]

Terry De'ath Hi Terry, Sounds like a great choice. You will find the OF1010 is a treat to use as it is nice and light but has plenty of power. It will come with 1/4" and 8 mm collets. I can't remember which collets the OF1400 comes with (I know it has the 1/2") but you ought to try and ensure that you have 8mm and 1/4" as well as that will give you more flexibility. Watch the safety side when you play with new toys ! Peter

[@ckkelby]

Excellent overview Peter and am REALLY looking forward to the 1010 video. That is next on my short list for Festool. I have the 1400 and love it! Also, making some head way on Stone Message...loving it thus far!

[@NewBritWorkshop]

Christopher Kelby Hi Christopher, When I look at all the hand-held routing tasks that I do over 90% can be done with the OF 1010 and some of the remaining 10% could be done if I had the right 8mm cutters. So, the OF 1010 will be your "go to" router and the OF 1400 can be used in a CMS and only taken out once in a while when needed. Thank you for getting Stone Message - please let Steven Spielberg know about it ! Cheers. Peter

[@ckkelby]

Well thank you for that insight Peter! I was at Woodcraft just a few hours ago looking at the 1010. Next time "Stevey" and I go out for latte's I'll mention the book to him ;)

[@petercutler3136]

Another 1st class video. Excellent Sir.

[@NewBritWorkshop]

Many thanks!

[@blackemmons]

Peter, Thanks for the detailed information. JimE

[@christianbuzio9468]

Welcome back Peter, new year new videos but same accuracy and detail attention. Always apleasure to follow your works. I have ordered just after the video the OF 1010, you wiped my doubts about it! Festool should make a statue to you, I am sure I am not the only one that will buy something after your reviews! Thank you and Happy New Year! Your italian fan Christian

[@NewBritWorkshop]

christian buzio Hi Christian, The reason this helps you and everyone else is that I only make a video about something that I am prepared to recommend to my very best friend. When I look into the camera I always imagine I am talking to my greatest friends. Enjoy your new router. Happy New Year. Peter

[@sunildzidek8777]

Thank you for great comparison and explanation. Which router I should buy for flattering wood slab 1400 or 2200? Thank you in advance

[@NewBritWorkshop]

Hi Sunil, If you can afford the OF2200 then get it - it is lovely to use and far better to handle than the OF1400. The OF1400 is lighter but the double grip and soft start on the OF2200 is a real benefit. I now keep my OF1400 in my router table setup where it is perfect. Peter

[@mattro4902]

As usual, Peter, spot on review. Thorough, easy to understand and to the point. This helped me confirm my router choice! Thanks so much and hope you and your family have a wonderful 2015.

[@NewBritWorkshop]

Matt Ro Many thanks Matt and the best to you and your family. Peter

[@skeetyschannel2114]

Thanks Peter for this very informative video. Currently have a Trend T11 and a T4 but the OF1400 is next on my "must have" list. I have been able to get hands on with the OF 2200 and 1400 and they are simply a pleasure to work with. The T11 will live in the table once I get the OF1400 :)

[@NewBritWorkshop]

Skeety's Channel Yes, my one remaining non Festool router sits in my UJK router table. Many thanks for the kind words. Good luck getting the OF 1400. Peter

[@brianrussell7691]

Another great video Peter! Keep them coming and Happy New Year!

[@NewBritWorkshop]

Brian Russell Many thanks Brian and happy New Year to you too. Peter

[@NomadMakes]

Thank for your another really informative and well made video. Cheers.

[@NewBritWorkshop]

Glad you enjoyed it

[@HPCthulhu2011]

I wish that the 2200 router would be compatible with the L32 hole drilling kit because you can use the 2200 in a router table, such as the Sawstop table which opens a whole bunch of new applications for the router, not just the portable uses because the 1010 is good for that being nice to handle. The 1400 is supposed to be the middle ground so how does it do in a router table, especially the Sawstop. Plus does the dust extraction have to be changed to a dedicated dust extractor...for a table.

[@NewBritWorkshop]

I have my OF1400 in my Festool CMS-OF and it is perfect. I have no idea how it would work in the Sawstop table. The dust extraction may vary with different makes of table and is almost certainly best with dedicated hoses going to your normal extractor. Peter

[@HPCthulhu2011]

@@NewBritWorkshop Okay I looked at everything now. I can get the Festool CMS-GE here at Lee Valley or else this setup which is not easy to find on KZbin and they are very different and not that easy to decide but they are both good: kzbin.info/www/bejne/o4G6kK18eM6YgZY

[@HPCthulhu2011]

@@NewBritWorkshop Actually that whole entire Sawstop setup is approximately $7,000 cdn. There is also an outfeed table that folds down and a huge sliding fence. I don't know why there are so many horsepower options like 1.75, 2, 3, 5, 7 horsepower motors but 1.75 on 110 volts with a Forest blade will cut hardwood like butter. I only have an outdoor place quonset 1,200 square feet for that, nothing indoor. It isn't that much money for a setup like that. Veritas hand tools will do most of everything that that huge machine can do.

[@roberthiday3342]

excellent report. thanks so much!

[@NewBritWorkshop]

Hi Robert, Many thanks. Peter

[@oneshot4274]

Great and informative video. For slab flattening would you suggest the 2200 or 1400?

[@danthechippie4439]

Hi Peter, I have the festool 1400 router and came across an issue I didn't expect. Recently I was lining up the ctr line on the base of the router using the ctr lines on the base for a mortise and after making a cut I realised that the cutter was slightly of ctr. Have you come across this?

[@NewBritWorkshop]

Hi Dan, It does occur for some OF1400 machines. Mine was fine from day one. It has been discussed many times on the FOG: www.festoolownersgroup.com/festool-tools-accessories/of1400-guide-bushings-and-what-exactly-is-the-problem-and-solution/msg596230/#msg596230

[@danthechippie4439]

@@NewBritWorkshop thanks Peter

[@sorinhodosan458]

Great, informative video! Would be great to see a hands-on review of some festool jigs for these routers, and to have your opinion on the festool worktop jig! Best wishes

[@NewBritWorkshop]

Sorin Hodosan Hi Sorin, I might not be able to get my hands on those jigs but I will try. Peter

[@peteralexander7524]

Thx's Peter Happy New Year too you and keep those video's coming ;)

[@NewBritWorkshop]

Peter Alexander Hi Peter, Many thanks and happy New Year to you as well. Peter

[@redstihl9027]

How would you go about routing in finger drawer pulls if you didn't have a router table? Or is it just not possible?

[@NewBritWorkshop]

You could set up a jig with a place for the drawer front that allows you to work through a batch of fronts. You would probably need a template or straight edge depending on the style of pull you want to create and this needs to be positioned exactly right. Then you can either have it set up for a bearing guided cutter, a normal router guide or for the side of the router base to follow whatever template you choose. Peter

[@TheJanzan]

Thank for the fine review, I am trying to learn something of routers, and try to find what are the R, D and NL of whar are the meaning of them? Please help me understand the meaning of the tree letters? bear regards Jan

[@NewBritWorkshop]

Hi Jan, I am sorry but I do not understand what you mean by R, D and NL. Peter

[@993ts]

Great overview! It looks like Festool has been treating you quite well lately. Best of luck in the new year! -Joey

[@JohnVanderbeck]

Is the OF 1010 good enough for doing Rabbits and Daedos for cabinets and small shaping for looks?

[@NewBritWorkshop]

Hi John, Yes, it most certainly is - it is a great router and there are plenty of cutters with 1/4" and 8 mm shafts. Cheers. Peter

[@ErikAnderson1]

Great comparison Peter! I want one of the 2200 and the 1010

[@NewBritWorkshop]

Erik Anderson Many thanks Erik. All three routers are brilliant - of course. Peter

[@TitusLivy777]

A very helpful review! Thank you!

[@NewBritWorkshop]

TitusLivy777 Many thanks. Peter

[@taylor22270]

Hi Peter, I'm in the market for an additional router, I already have the trend T11 a heavy weight like the OF2200! But I'm looking for something a little more agile for lighter work/edge banding etc. I've thought about the MFK700 but think this is limited to just edge work so have looked at the Makita RT0700 kit but wanted your thoughts on the OF1010 for everyday 1/4" bit work but also edge banding. I have a project I'm starting in Feb that will require a lot of edge banding on hi gloss acrylic cupboard doors. Your thoughts are greatly appreciated. Thanks Nigel

[@NewBritWorkshop]

Hi Nigel, I have owned several Dewalt routers, a Stanley Professional (a collector's item which I still have), an Axminster machine and one from CMT. I have used many others including Makita, Bosch and Elu. Not one of them comes close to any of my Festool routers. The OF1010 is the router that I use the most as it is very easy to set up and has plenty of guts. I have used the edge trimming kit many times. Have you seen my two part video as it shows the edging kit (Part 1: kzbin.info/www/bejne/b6PHZGdrptx8obc and Part 2: kzbin.info/www/bejne/bp2TaoRnrLSCaas) ? When I needed to do a bunch of edging work I did consider getting the MFK but am happy that I stuck with the OF1010. Peter

[@taylor22270]

Hi Peter, thanks for you advice. I'm now the proud owner of a OF1010. Another layer to the Festool tower

[@Andrew.Chalov]

Thanks so much for the review!

[@NewBritWorkshop]

Andrew Chalov Hi Andrew, Thanks you . Peter

[@alancroft6928]

Fantastic. Thank you.

[@NewBritWorkshop]

Thank you too!

[@GNU_Linux_for_good]

Can I use all three of them with my *FS 1400/2* guide rail, Peter?

[@NewBritWorkshop]

Yes, as long as you have the attachment for the guide rail. I have done this many times and it is a very useful method of using the routers. Peter

[@GNU_Linux_for_good]

@@NewBritWorkshop Thanks a lot, Peter!

[@LouAdzima]

Very Nice graphics. Good information as always.

[@bradlines9290]

Hi peter, as a general carpenter I am thinking of buying a new router for fitting kitchen worktops as my previous makita 1/2 was stolen, as I would not be fitting everyday would you say the 1400 would be man enough or do you think I should spend a bit more money and get the 2200? Regards Bradley

[@NewBritWorkshop]

Hi Bradley, I am sorry to hear that you old router was stolen. The OF1400 will manage the work but if you are going to regularly tackle kitchen work top fitting then you will find the OF2200 much more suitable. It is also far better at dust collection, is easier to set up and has a gentle start-up so it does not jerk as you get it going. My current router setup puts the OF1400 in my router table where it does a great job. I then mainly use the OF1010 (baby router) for almost everything else and have the OF2200 for the more demanding freehand or rail guided tasks. I hope that this helps. Peter

[@bradlines9290]

Thanks for the advice peter much appreciated

[@jacprivate3682]

Hi Peter. You sure the OF1010 can be used with the Leigh DR4? I have both but was told that I had to buy a router with half inch collet? Thanks for a great review and all the best for 2015

[@NewBritWorkshop]

Jac vds Hi Jac, I use the D4R and all of my cutters are 8mm shank. There are a few larger cutters for the D4R that require a 1/2" collet but I do not use those. I make loads of dovetails with no problem at all. Peter

[@danthechippie4439]

Hi Peter, I had a quick question about 110 volts Festool tools. I noticed that my router and 55 circular saw seem to lack a bit of power especially when starting up. I wondered if I used a 5 k transformer instead of the standard transformer would that make any difference or hurt the tool? I understand Festool recommend the larger transformer for there extractor systems but is it ok to use the bigger transformer on stand alone tools? Cheers Dan

[@NewBritWorkshop]

Hi Dan, How are you? We have not chatted for a while. I am no expert on 110v systems but my electrical knowledge tells me that the bigger the transformer the better as the smaller ones can become overloaded under full power and then heat up. Peter

[@danthechippie4439]

New Brit Workshop hi Peter, ya it’s been a while. I’m great and I hope you & yours are all doing well. Thank you for that advice. I have a larger5 K transformer so I will put the larger plug on an extension lead and give it a go. Thanks again Peter I always appreciate your professional advice. Cheers Dan

[@NewBritWorkshop]

Hi Dan, We are really busy trying to move house. It is amazing how much clearing out one has to do after 35 years in the same place. The move is really hitting my video production as I am trying to clear out the workshop as well. Hopefully the new place will have a suitable space for video work and a workshop. Cheers. Peter

[@danthechippie4439]

New Brit Workshop hi Peter- SNAP. I am also moving house, hopefully in next 4-5 weeks.

[@NewBritWorkshop]

Hi Dan, Good luck with the move - we are just at the beginning with no end date in sight yet. Peter

[@javiervelasquez2525]

Hello Peter, excellent video about the Festool routers and their applications. I just bought my Leigh Jig D4R Pro, I am using the Bosch 1617 EVS, but I am trying to buy another router, so between the OF 1400 and the OF 1010, what would be your best recommendation to use with the Leigh Jig? What is the more ergonomic, accurate and easy to use with this Jig? Thanks.

[@NewBritWorkshop]

Hi Javier, Without any hesitation or doubt the best router in my view is the OF1010. You will need the centring mandrel - see my recent Workshop Notes video - kzbin.info/www/bejne/gKmqimx6drmAarM Peter

[@javiervelasquez2525]

New Brit Workshop Hi Peter, I really appreciate your quick response, thank you for your recommendation, and Happy New Year.

[@joestafford6255]

Hello Peter, Great video as usual. I have a question about your recommendation of the OF1010 for use with the Leigh dovetail jig. In North America, the larger dovetail and larger straight cutters only come in 1/2" shank, which would not fit the OF1010. Are these cutters available in 8mm shank in the U.K.?

[@NewBritWorkshop]

Joe Stafford Hi Joe, That surprises me as I did not know that Leigh made 1/2" shank cutters. I have all of the Leigh cutters on 8 mm shafts and I bought them from Axminster Power Tools. Peter

[@joestafford6255]

New Brit Workshop Hi Peter. The number 90 and 100 dovetail bits, and the 150 and 160 straight bits are only sold in 1/2" shank direct from Leigh. See the following URL www.leighjigs.com/cutters-d4.php. Through Lee Valley, you can get the number 100 dovetail bit in 8mm.

[@NewBritWorkshop]

Joe Stafford Hi Joe, You learn something every day...I only have 8mm shafted cutters - 50, 60, 70, 75, 80, 101, 120, 128, 140. Many thanks for pointing this out. Peter

[@beetlejer]

Hi Peter, I have the old Elu 177E and the bearings have gone, would u recommend replacing bearings or going for the 2200

[@NewBritWorkshop]

I would not replace the bearings. Look at the OF2200 first but do not rule out the OF1400. Just decide how much heavy work is needed. Peter

[@beetlejer]

Thanks Peter I did a lot of raised panel work with my old Elu, love ur videos, very informative. Kev

[@tellis9844]

Hey Peter, is the OF 1400 capable of cutting 38mm kitchen worktops using a butt & scribe jig?

[@NewBritWorkshop]

Lerkio xG No problem at all. If you were doing 10 or more a day then I would recommend the OF2200 but the OF1400 is a powerful machine, with an 1/2" collet and easy to handle. Peter

[@tellis9844]

Thanks Peter, I've been considering purchasing a 1400 for a while but I was concerned that it wasn't powerful enough for my needs. Perhaps for a future video you could do a similar comparison of the Festool sanders? Thanks again.

[@NewBritWorkshop]

Lerkio xG The OF 1400 is a great machine. I will need to borrow a lot of sanders to do a comparison video ! Cheers. Peter

[@danthechippie4439]

Hi Peter, again another great honest review from someone who actually uses but more importantly OWENS these tools and purchased with his own money. After watching your videos and listening to your advice I believe I will be purchasing the 1400 unless you advise differently- as a carpenter this router will be used for morticing such as door locks/ face plates, , notching for 4” butt hinges,trining plywood to wooden frames etc. in your profession opinion have I made the right choice? Cheers

[@NewBritWorkshop]

Hi Dan, I think that you have got it spot on. The OF1400 can take all sizes of cutter shank and so for those heavy tasks you can use cutters as big as they come. Some find the ergonomics of the OF1400 need a while to get used to - I found the machine slightly strange to handle at first but then grew used to it and found it to be perfectly okay. The OF1010 would not cover the full range of carpentry needs and the OF2200 would be a bit heavy for the more delicate work. So, good choice. Peter

[@eustaquiosantos8018]

Qual é o valor da 1010?

[@NewBritWorkshop]

In the UK it is about £450. I use my OF1010 more than any other router and it is brilliant. Just remember that it only has 1/4" and 8 mm colletts. Peter

[@trig]

Hi Peter, How long did it take before you became accustomed to the handle/trigger arrangement. I have only used my 1400 a couple of times because it feels like I should be left handed.

[@NewBritWorkshop]

Michael Tricker Hi Michael, I should have mentioned that in the video. Some people think that it looks strange but I found using it came very naturally. I like the symmetrical two handed design for the OF2200 but am more than happy with the handle for the other two. Peter

[@christianherzinger6653]

You just need all of them! :-)

[@eaglecot]

Unfortunatly the OF2200 doesn't work with the Festool LR32 system. But at the same time it has a better base option for the FS rails.

[@NewBritWorkshop]

eaglecot That is true. The OF 1010 is the router for the LR32 system. Enjoy your woodwork - the OF 2200 is a brilliant machine. Peter

[@rossbarrett7714]

Hello Peter, I've just come across this video looking for more information on the OF2200 and OF1400. I found your video really helpful but I'm wondering which router you'd recommend for doing kitchen worktops?

[@NewBritWorkshop]

Hi Ross, For me it would be the OF2200 but if that is too expensive you can take second best (for kitchen work) the OF1400. I have both and would not swap either for anything. I use the OF2200 for the bigger hand held jobs and keep the OF1400 in my Festool CMS router table. Peter

[@christianbuzio9468]

I get Stone Message at least! New credit card number by my friend, at least! Now I will try to read it with my poor english! Good start for new year.... btw you who are so clever, why don't design a diy boom arm for Festool CT26 and 32....you due it, I bought both two after your review and you are right...fantastic machines! But boom my opinion is too expansive for that kind of object.... Do you have in england some shop like in usa that sold refurbished tools? Any suggestion? Thank you again for be our best friend advisor;-) Sincerely your friend Christian

[@NewBritWorkshop]

christian buzio Hi Christian, Thank you for buying the book - I am sure that you will manage the English. I do not need a boom arm as I have my bungee stretched above my work area and the hose goes over that - it works really well. A bungee costs just $2. There are not many people who refurbish tools these days but sometimes you can ick up a bargain on ebay. Take care and enjoy your new tools. Peter

[@alexcahill4733]

Tansk for the vido And tansk for doing 2 vido on the 1010 to And i tink you did not mention Does the 1400 and 1010 Are the only router that fit the 55 inch track with peg hole But you sel me on the 1010 cause it have a 800 mm track that come with it And i did plane to get it for my tsq75 but now i have a extra router too 😉😍

[@NewBritWorkshop]

Hi Alex, All of the routers can be used with the Festool track but the attachment is an extra for both the OF1400 and the OF2200. Peter

[@thespanielinquisition7167]

I have all 3 but to be honest I never use the Of2200 - you dont need it and the OF1400 unless you need a handheld spindle moulder

[@NewBritWorkshop]

Nobody expects... That is interesting. I have had my OF2200 in my router table for the last 3 years and recently put the OF1400 in there instead. I rate the OF2200 as one of the 3 finest tools that Festool makes (Domino DF700 and Conturo are the other 2). It has near perfect ergonomics with everything available without needing to take either hand off the machine. I admit that it is not light but then most of the time it is resting on the surface of whatever one is working on. I do have the OF1010 for more delicate work. Many thanks for your views. Peter

[@johnmutton799]

CHECK THAT THE BARS WHEN PLACED IN THE ROUTER LIFT ON THE FAR SIDE FROM THE LOCKING LEVER. THIS THROWS IT OUT ESPECIALLY WHEN USED ON THE GUIDE RAIL. THEN IT DOES NOT LET THE ROUTER LAY FLAT ON THE WORKPIECE. THIS MEANS YOU DO NOT GET A PERFECT 90 DEGREES CUT IN THE WORKPIECE OR ON THE EDGE. I GET AROUND THIS BUY SHIMMING THE BARS WITH THICK FOIL WHICH THEN MAKE THE BASE SIT PERFECTLY FLAT ON THE WORKPIECE. THE HOLES IN THE BASE SHOULD HAVE BEEN DILLED NOT CAST IN THE BASE.

[@NewBritWorkshop]

Hi John, If your router is new then get Festool to look at it. Mine does not need any shims at all. Peter

[@BillCo92]

Hi Peter, this isn't related to this video but I was wondering where you purchased your dust deputy cyclone. I would like to invest in one. They're not as available as in the US. Thanks

[@NewBritWorkshop]

BillCo92 Hi Bill, I got my sister to buy one for me when she went to the US. I do not know of anyone selling them in the UK. Peter

[@yevgeniyshawyer2767]

Of2200 and cordless dewalt router for delicate work then

[@NewBritWorkshop]

The baby Dewalt is a sweet little router but the OF1010 has far better dust collection. Peter

[@yevgeniyshawyer2767]

@@NewBritWorkshop makes sence

[@dickchiggas1514]

Well thank you for narrowing my decision to three routers! I'm going with Hitachi!

[@GuitarsAndSynths]

Why are Festool products so expensive? Are they made in China?

[@jamesarc8192]

Typical Brit, 1/2 inch down to 6mm without a hint of irony. Heathrow airport has a tunnel approach and as an international airport has a height warning in feet and inches only!

[@jacobhedepihl4771]

hollo peter i a 13 year old boy from Denmark i love tools and i haw rally taken a inderst ind festool routers, and sins i am only 13 year old i dont haw that moths Mosels, i haw fink Aboud the of 1010 or the of 1400,in Denmark do we only haw 8 and 6 mm Collets, i dont now if i should take the of 1010 or the of 1400,

[@NewBritWorkshop]

+Jacob hede pihl Hello Jacob, It all depends on what you want to make with your router. I would guess that the OF 1010 would be a good start as the smaller 6 mm or 8 mm cutters will not be quite so expensive. Good luck. Peter

[@jacobhedepihl4771]

+New Brit Workshop (Peter) i love your videos, is becuse i haw no intension of yousing the router to somfing big, you and meny order youtubers has set that the of 1400 is the best router but must people in Denmark hat tolt me that the of 1010 is the best , thank you for your anser is vary nice to here your mening you ar af vary intelligent man, i vod love to ride you Again

[@mitchellkasdin1899]

No it’s your fault that I’m buying a Festool router....lol.

[@NewBritWorkshop]

Hi Mitchel, Oops - sorry ! Cheers. Peter

[@constuctivecritisism8393]

Festool is way too expensive

[@NewBritWorkshop]

If you are going to offer "constructive criticism" then you have to follow any critical comment with a thorough analysis of the alternatives and that does not mean the $60 router in the bargain bin a your local DIY store. You have to compare like with like.