Stratco Gable Roof Garage Installation Guide

Form and function come together in the classic shape of the Stratco Gable Roof Garage.
This video displays the steps involved to build a Stratco Gable Roof Garage from start to finish. With the clear instructions in this step-by-step installation guide, the Stratco Gable Roof Garage is the perfect do-it-yourself shed project.
Looking for a quote? visit www.stratco.com.au/contact/
Or give us a call on 1300 165 165
0:00 Introduction
2:03 3.0 Footings
3:12 4.1 Wall Frames
4:31 4.2 Wall Girts
5:17 4.3 Wall Sheeting
6:19 5.0 Gutter Installation
7:45 6.0 Personal Access Door
9:33 7.1 Standing The Wall Frame
10:19 7.2 Rafters
11:11 7.3 Roof Truss & Purlins
12:14 8.1 Rear Wall Girts
12:54 8.2 End Columns
13:31 8.3 Footings
13:58 9.1 Gable Wall Sheets
15:32 10.0 Flashings Ridge & Barge Capping
16:15 11.0 Downpipes
16:41 12.0 Wall Bracing
17:09 13.0 Maintenance

[@TheKnobCalledTone.]

I love the music in this video! It's a bop.

[@TVTV-rm3sn]

I am still building mine (exact the same with the one shown at the end of the video) and my suggestion is that if you try to DIY, think again as it will be really really challenging - let's say 100 times harder than IKEA, here's why: Only some of big parts are labeled with unreadable factory codes and all mixed up in piles when delivered (Yes you will need to unpack and spread ALL parts on the floor before start, then guess and try). No dedicated instruction come with the product. I had to read though 5-6 online instructions before it starts to make sense. Why so many? Because they copy and paste pages from each other and still don't cover 100%. This video sounds very detailed before you start. But you will soon realize it is incomplete. For example, it doesn't mention the garage door installation. I had to go to Stratco's retail shop to ask the staff - he doesn't know too and had to call head office to get engineering team to contact me. They eventually send a screenshot from the instruction which I already read and pointed out it's incorrect at the first place. Before making purchase decision, test yourself by read through all instructions relate to garage door installation from their website to see if they are comfortable to understand - the actual work is harder since many parts don't look exactly same to the instructions and some totally different. Keep in mind all small parts are mixed up and not labeled.

[@mousetrap13]

I got on no worries, maybe I'm good at jigsaw puzzles?

[@TVTV-rm3sn]

@@mousetrap13 Glad to know you find it easier. I had no experience for it - the hardest part for me is some parts and the instruction don't agree with each other. Eventually most the problems turned out pretty straight forward after they are figured out. If I'd do it again it will take no more than 3 days. However before that, I have funny moments when a part belong to one section packed in a different pile. Some accessories boxes delivered to me were ripped open and mixed with parts from likely returned stock. I don't mind that but it made it even harder to put the puzzle together.

[@Iggs_1]

@@TVTV-rm3sn i know exactly what you mean, my shed came with no instructions whats so ever, and just general email with links and junk links. i work in food industry, we have over 50 operations and every operation has its standard operational procedure SOP, so you get that food product everytime same great quality. stratco has under 50 sheds i would guess, and cant come with specific individual instructions for every type of shed...? for a 5900$ shed i am not happy with how the beggining looks like ... :D

[@pinkfloyd-darksideofthemoo9981]

Good job guys!!!

[@somalia5019]

New subscribed from Somalia

[@fenarachanel10]

good job

[@jonnykrivan6840]

This music is da bomb

[@rafivira8516]

good

[@tukangkampungID]

nice brader.........

[@hinto7776]

Good

[@sumonmiah137]

nice.

[@JohnsonAthokpam-me9cb]

Full. Support. This. Channel ♥️👍👌👍

[@stratcoAU]

Hi Johnson, thank you.

[@rustynail10]

DANG yall need a US distribution point !

[@stratcoAU]

Hi Tom, we are actually already in the US, see www.stratcousa.com

[@AMLagonda]

Im just assembling my garage now and I really would like a better clearer video than this, there is a lot of things I have had to work out on my own as even the instructions that come with it are terrible.

[@oscarcondez5776]

M

[@thomasmurray4717]

I like this a lot. Are different roof pitches available?what colors are available?please list a way for me to talk to you.

[@stratcoAU]

Hi Thomas, we have a range of standard options and an engineering team that can custom design to meet your requirements. You can call us on 1300 165 165 or send an online enquiry at www.stratco.com.au/contact/general-enquiry/

[@abdulwahidalabdulaal7683]

Welcome dear. Thank you very much for this simple explanation. But I have a question where can I find all these supplies? Is there a company that has supplies? I have many thanks and respect. And accept my greetings and thank you

[@stratcoAU]

The Stratco Gable Homesheds are available from Stratco These products are all available from Stratco. Learn more about us at stratco.com.au

[@wexbmc]

@@stratcoAU mom is

[@mousetrap13]

I have a 2nd hand shed similar to this one to put up, avid DIY lady. I was going to put the frame up & then clad. I've been told about this method & after seeing it I'm inclined to try it. I would've thought there's less room for error this way? I get the lift part will need assistance but apart from that, why would it be better to put frame up before cladding? Any thoughts please?

[@tommoss2005]

That is how I plan to build mine, firstly to make lifting the side frames easier, secondly to make it easier to lay the floor slab (the wall sheets will get in the way). I have a friend who is helping me who has built heaps of sheds and has always done it this way.

[@andersonoliveira496]

Acho que ele entortou as pontas da telha, para a água não cai forte no chão, fazendo buracos no chão. Mas eles colocaram calha, deve ser para não cair água fora da calha e desgastado sempre no mesmo local onde a água bate.

[@exogator]

He bent the top edges up so rain doesn't flow up the peak in high winds

[@gokhansahan3998]

Verry nice garage how much money ?

[@jimsoulios9027]

4 tensile bolts for rafters , yet 2 hex screws for ridge brackets to prevent movement ?

[@thunderpop20]

Taken it leather boot

[@maltana4]

How does the C section columns go cemented into the ground? I've heard mixed reports about doing this and also doing the slab inside the shed against the colourbond,any advice? I kind of figure that if stratco are doing it then it must be ok

[@stratcoAU]

Hi there, please contact your local store on 1300 165 165 for this enquiry. The team will be able to assist you quickly over the phone. Regards, Annabelle

[@oo0Spyder0oo]

The concrete will be flush with the bottom edge of the colourbond. It can be a problem if filling above the sheet level, usually people do that with existing flooring or such.

[@ashleighcash4681]

Don't nock the coating off when finishing concrete it will rust at concrete hight big cost to fix 5 15 years later hope this helps. I have made good money fixing post an footings .easy to fix a roof hard to fix footing

[@thomasmurray4717]

Is there a building contractor for these things in the Baton Rouge, La. area? I’m too to try to build one myself. Thanks.

[@stratcoAU]

Hi Thomas, you can contact our US team at stratcousa.com/contact/

[@davidheness8228]

Is the same process used for when posts are pinned to concrete

[@stratcoAU]

As per the installation video (at approx. 1:38 mins), you need to refer to the ‘Fixing to Concrete Slab’ install guide at www.stratco.com.au/siteassets/pdfs/garages_gable_fixing_to_concrete_install.pdf When purchasing a shed, customers receive further, detailed information in the order confirmation email to assist with installation. Apart from the footing connection, all other details are as per the installation video above or installation guides below: 15° Domestic Garage Frame Installation Guide www.stratco.com.au/siteassets/pdfs/garages_gable_frame_install.pdf Garage with Roller Door Frame Installation Guide www.stratco.com.au/siteassets/pdfs/garages_gable_roller_door_install.pdf Garage With Sliding Door Installation Guide www.stratco.com.au/siteassets/pdfs/garages_gable_sliding_door_install.pdf Contact us on 1300 165 165 or at stratco.com.au/contact if you require any further information.

[@gingerbread1032]

Came home and discoved two panels removed and garage ran shaked. Be sure to use one way security fasteners if security is at a minimum.

[@cooperamelie2044]

I built a shed with these plans from Ryan [ Details Here?> *WoodBlueprints. Com* ] . The instructions were clear and easy to implement. Even a novice can be able to build fast using this plan. I'm happy I bought the plan. It also saved me much cost.

[@igorovcharov7424]

негры лютуют? ;-))

[@devid6976]

salam qaqa

[@gajendrasinghsisodiya9705]

Sir plz explain size of rafter and purlin channel And also the size of this shed

[@stratcoAU]

Hi there, The rafter and columns are 150mm C-Sections, the purlin and girts are 75mm C-Sections and the size of the shed is 6.2m W x 9.2m L x 2.7m H. We currently have this shed on display at Stratco Gepps Cross if you would like to come have a look. This installation guide is for our Gable Roof Garages which come in a range of sizes. We design and manufacture our gable roof sheds to suit the exact size, colour and orientation preferences of each customer. Learn more about our gable roof sheds and garages at www.stratco.com.au/au/sheds--garages/garages/gable-roof-sheds/ Thanks, Annabelle

[@jenniferoviawe]

Daaa gaaarraaag lol @1:28

[@NathFromOzz]

Play it at 0.5 speed or 0.25 😂

[@baazigaj9125]

Can this be used for the house as well

[@stratcoAU]

This installation video relates to our gable roof garages.

[@016162877]

Depends on where you live my friend. Some people and families I know around the world would be VERY happy to have this as a house 😎

[@leiladaquil6587]

Can we use rivet nut on this project?

[@stratcoAU]

We recommend using the selected fasteners supplied & shown for each connection in the installation video as they have been engineered, independently tested and certified as part of the complete shed system to meet all relevant Australian Building Standards and Building Code of Australia.

[@user-xg3hj8vz3x]

👍🏻👍🏻🌹🌹🌹👏🏻👏🏻👏🏻👏🏻

[@abelcarranza1997]

Ojala pueda encontrar un vídeo como este en español.

[@stratcoAU]

Hola Abel, no tenemos videos en español, pero si nos envía un correo electrónico a [e-mail] para que podamos responder sus preguntas. He usado Google para traducir al español, disculpen los errores.

[@thunderpop20]

I’m looking fir my own house

[@thunderpop20]

Blake jones

[@moshetv1017]

GOOD day can I get the name and all the parts required to build this exact garage please I will be most grateful 🙏

[@stratcoAU]

Our gable roof garages are all custom made to suit your exact requirements, they are not a standard out of the box product. Learn more and request a free quote at www.stratco.com.au/au/sheds--garages/garages/gable-roof-sheds/gable-roof-shed/

[@rambabusinghdawnlud7069]

Me

[@karmanjie2230]

Rambabu Simngh dawnlud

[@bouchenafazohir7129]

HELLO COULD YOU TELL WHAT IS THE THICKNESS OF THIS FRAMES

[@stratcoAU]

This frame thickness varies by shed design and location and can differ between the framework components - Columns, Rafters, Gable End Columns, Roller Door Columns, Wall Girts and Purlins. The shed in the video is a domestic shed which consists of C150mm portal frames (columns & rafters) and C75mm purlins and girts. The C150’s can range from 1.2mm to 2.4mm thick and the C75’s from 1.0mm to 1.5mm thick. Our shed designs can be modified to suit the unique requirements of every customer, request a quote for your own shed today at stratco.com.au/contact

[@thunderpop20]

Andrews smith

[@thunderpop20]

Jacob hothams

[@OanhNguyen-yu6yi]

Helo ayuonomogto

[@thunderpop20]

Ben delfs peter Shaun overall

[@edgarbleikur1929]

Good old Aussie accent lol

[@Iggs_1]

I bought a 6x3x2.4 m high wall gable roof "single garage shed" with roller door. Instructions are general. I am a handy man but never built sheds, I was hoping to receive in my email pack "of how to step by step" how to build my own shed i bought and not receive a general email with this video attached to it and other advertising stuff. STRATCO AU, is it that complicated to have a specific instruction for the shed i bought? Am i expecting too much for a 5900$ shed? Make your product easily read and understood by simple handy men not just builders- this is how you increase your market. I need a simple step by step guide how to install my shed, thanks

[@stratcoAU]

Thank you for your feedback we are always looking to improve our videos. If you would like any further information about a particular install please give us a call on 1300 165 165.

[@Iggs_1]

@@stratcoAU i have been told “we have had same instructions for 11 years”. For a DIY shed ( 6x3 m and 2.4 m high wall) as is advertised, there are almost NO instructions. What about giving proper instruction similar to a IKEA product, steps to follow to build the shed please…? Unless STRATCO you make this on porpoise to get more business to build it???? I feel forced to contract a builder to build a DIY shed only because the available instructions are hard to read for a handy man, they are more intended for builders and engineers…. I wish i have read instructions before purchasing my shed, lesson learnt Stratco. Will you change your advert that is not a DIY shed or actually make some proper instructions and videos related to your products…? Thanks

[@briandavid5668]

my english speaking mates want to know why you would fit a' box cutter'

[@Lancelot_Jago]

Box Gutter

[@tranho4262]

T

[@thunderpop20]

Neighbour

[@luisbarquero5704]

What happens if you get diabetes?

[@rafivira8516]

good