Stribog A3 build update.

[@8BloodyKnuckles]

Someone was upset because of the stock but didn’t put it together that perhaps you’d SBR’d it? Lmfao! But wait…. You didn’t safety check the SBR in the beginning of your video either. Lol😂🤣 Absolutely badass videos man. Amazing amount of information, and it helped me decide the direction I’m going to go. Thanks for putting all of these videos out there. Potatoes gonna potate… haters gonna hate. Do you man. Keep pissing the haters off.

[@sabregunner1]

I know they assume it isn’t SBRd. How can one tell if it is or isn’t. Some people get all high and mighty on things they don’t have any clue of it’s actual state

[@donlee157]

thank you for your presentation~! nice gun and nice choice for upgrade parts~!

[@MRD0889]

I just picked one up. I have the GHM9 compact and I just got my tax stamp in for my Wolfman Naked lol. The GHM9 suppressed amazing that it left me wanting another 9mm PCC So I saw it in Miami for $800 with the brace which shocked me because in Orlando they're going for $1,300 Can't want to break it in and thread the wolf man to it

[@SKS84]

Very good video, thanks for sharing. this is my next purchase. I like and I subscribe

[@fpav4049]

A lot of great info and upgrades. How hard was it to replace the Bolt release spring from ILWT?

[@blstic2a]

its simple once you get the barrel out. You will need the barrel nut wrench from ILWT.

[@tunnicn]

@@blstic2a do you have to remove the barrel to do it? Looking forward to your reassembly videos. How is your stribog so perfectly clean? 😄

[@mixdbyjoshua5621]

Nice

[@AJ-nh8ik]

Does the ILWT A1 barrel fit for the A3? Are they the same or is there a difference? Fit wise, not length. When I checked their site, it only shows a barrel for the A1, and not A3. This is why I ask.

[@blstic2a]

I believe they are the same for either gun. You could always call ILWT and ask

[@AJ-nh8ik]

@@blstic2a that's what I'm going to do. Always good to check with company. They can give exact answers.

[@KronDestroyer]

Can you list the parts you changed out please?

[@blstic2a]

Sure... On the original lower I replaced the factory trigger springs with the set from HB Industries. Also used the extended bolt stop from HB Industries. On the original barrel I removed the thread protector and replaced with the Micro Comp from HB Industries. Also replaced the factory bolt catch spring with the better spring from ILWT. Originally the gun had the SB Brace and adapter from A3 tactical but I removed that and installed the A3 tactical folding brace/stock kit (pictured). I replaced the crappy plastic sights with the steel sights from Grand Power. I replaced the original charging handle with the folding charging handle from ALH Precision. I replaced the original barrel with the 6" barrel from ILWT including the barrel nuts from ILWT. I also bought the HK style take down pins from ILWT (although they came with the new lower from A3, so I have an extra pair). I installed a Key Micro (key mount) muzzle device from JMAC Customs on the barrel so I could do quick changes of my suppressor to multiple guns, its pretty awesome even if you don't have a can to run. Last I installed the A3 lower so I could run scorpion mags and AR style triggers and grips. I installed the Timmney PCC trigger (love it!) and the B5 Systems Type 23 grip. I think the last thing I will do is to run a spacer from One Off Coating to speed up the bolt travel and cyclic rate. Hope this helps!

[@KronDestroyer]

@@blstic2a Damn! Thank you for the detailed answer, I like the idea of the barrel swap with the ability to throw a can on and off easy. I eventually want to get a suppressor so maybe I'll take take a look down the line at what you grabbed. Honestly probably will keep my oem lower though but the scorpion Mags are sick and i like how you can put new grips and triggers on if you want. I grabbed the micro comp, and extended bolt release from HBI, thinking about the short stroke and lighter trigger spring too but I wanna shoot it first to feel how it is with what I have. Ill also probably switch out to the steel sights. Other then that I got a he510c but it was faulty and after I checked it out I think im better off with a scalarworks leap/04 riser with either a RMR or SRO optic. Thanks again for all the info!

[@maxspowers1515]

What is the name of the Muzzle brake I’m on their Jmac website and there are a lot of key micro muzzles ? Please and thank you

[@pharaohgxdmxd3314]

Where you find the A3 Lower? I thought they were sold out.🤔

[@blstic2a]

from A3

[@bradisaacson4656]

I sent my A3 lower back. So far not so good. It will not feed. I will wait for A3 to assess the lower before I say thumbs down or up. But I am not enthused at this point. Oh yeah,. The factory lower works fine.

[@george6036]

Please list parts that you replaced with links. Thank you

[@MLinktheprophet]

Did you throw away the factory sights?

[@blstic2a]

No I still use them. I replaced the crappy plastic ones with the metal ones made by Grand Power.

[@MLinktheprophet]

@@blstic2a I meant.do you still have the factory ones? If so, I'll take them off of your hands because I still use mine.

[@LosDoyerss]

Suppressor is half the size of the gun haha!

[@starxlord9856]

I’ll save for the scorpion and get the micro k conversion instead of buying this buying a new lower and all the parts for it. Your better off getting a scorpion anyways. Better mags better gun more reliable and durable