Thanks Federal for allowing me to purchase this ammo at retail! Priceless ~
@louis0531oogle2 жыл бұрын
Thank you for taking the extra time to explain, and the safety-first overview. I thought your video was too long when I scanned available vids, but it was very enjoyable and relaxed... and thorough. Thanks Again!
@budgetguncinema77772 жыл бұрын
Thank you, I appreciate that. I try to talk to the camera as if it were a buddy sitting at the table with me. If I think about a bunch of people watching my video I get a bit of stage fright if you will.😆
@bobcatforever34854 жыл бұрын
Good video. I like the fact that you went thru the installation step by step. And it looks like a nice improvement for the M&P. Take care.
@budgetguncinema77774 жыл бұрын
Thanks! Super easy install. Makes the ergos way comfy. Plus extra ammo. Win. Win. Win. 😆👊🏻🍻
@joecasillas7966 Жыл бұрын
Good video...installed mine on the 7 round with ease and just snugged the screw with the lock tight, nice !
@budgetguncinema7777 Жыл бұрын
Awesome! They're such a great upgrade for the Shield.👍🏻🍻
@twiggyuno Жыл бұрын
thanks for this vid, was worried I was going to jack this up and it made it effortless. The bit about throwing the cap and pausing the "tape" plus the wtf had me cracking up @10:10 LOL
@davegass16504 жыл бұрын
I have a few of them on my Shield 2.0 , 9mm 7 round magazines . Love them .
@budgetguncinema77774 жыл бұрын
I may be turning into a Strike Industries fanboy.🤣🍻
@AO-rd6ft7 ай бұрын
This set up with magguts would be🔥
@budgetguncinema77777 ай бұрын
I've not tried the Magguts springs. For some reason I'm a little skeptical on their reliability. No particular reason for it other than the unconventional manner of their design I guess. Give it a go and get back to me!😉👍🏻🍻
@TyDie13 ай бұрын
What on earth is that holster? That thing is GIANT. I’m guessing you don’t appendix carry with that massive paddle. But you’d be better off with a side car holster
@budgetguncinema77773 ай бұрын
It's the American Purebred by Massaro Holster Works. Contrary to what your eyes are telling you, it is the opposite of GIANT. Super low profile. Super light weight. Extremely comfortable to wear and yes you CAN wear it appendix if you want. I don't. It was Concealed Carry Magazine Editor's choice in 2017. Endlessly adjustable as far as ride/cant and position on your belt. You can go from 3 or 4 o'clock to appendix or crossdraw or on your 6. Best holster I've used to date. kzbin.info/www/bejne/hWe7eJyYrLOVZrMsi=oSwZdk4VVq8jsvxp
@shuumai3 жыл бұрын
The Website has a warning to only tighten the screw until it stops. Tightening it more could cause damage.
@hesa36564 жыл бұрын
Thank You Sir! This was a great demo!
@budgetguncinema77774 жыл бұрын
You're welcome and thank you for watching! 👊🏻🍻
@AlphaRomeoOneFive4 жыл бұрын
Strike Industries is the cats meow. I absolutely love them and their products. I've dealt with their customer service twice, and it's been fantastic
@budgetguncinema77774 жыл бұрын
Good to hear. Haven't had a need to deal with customer service, but I am liking the parts I have so far 👍🏻🍻
@AlphaRomeoOneFive4 жыл бұрын
@@budgetguncinema7777 yeah once with their customer service was my screw up, the other was inquiring to see if one of their parts would fit on what I needed it to. They were wonderful both times. That in combination with their quality parts and good prices has made me a big fan
@SHOOTRIDELIVE4 жыл бұрын
SUPER FIRST! I had those same plates when I had my shield.
@budgetguncinema77774 жыл бұрын
That's cuz you live closest so you get the notifications sooner.😂
@SHOOTRIDELIVE4 жыл бұрын
@@budgetguncinema7777 Wouldn't that be some shit if that's how it worked. Lol
@christiancollins72205 ай бұрын
I installed mine on the 7 round magazine, but for some reason the magazine doesnt easily eject. I have to apply a good bit of pressure to pull it out.
@budgetguncinema77775 ай бұрын
Interesting. Mine does the opposite. It comes out fine but you really have to slap it home going in to get it fully seated. Maybe reach out to Strike Industries directly either through social media or the contact link on their website and see if they have any suggestions.
@scottf.38084 жыл бұрын
Good little addition and nice install....Those 2 rounds could come in handy....Good stuff....
@budgetguncinema77774 жыл бұрын
That's one extra double tap! 😉👊🏻🍻
@rbm61844 жыл бұрын
Looks like performing surgery on the mag. Haha. Got to give you credit. Most folks would not even read the instructions. Thanks for sharing.
@budgetguncinema77774 жыл бұрын
Most times I'm good at identifying how things go together by eyeballing the parts and visualizing how they connect. Sometimes it helps to keep the instructions for reference. 😉🍻
@Kennyfrluckaj Жыл бұрын
Thanks for the video. So how bout +2 baseplate and magguts +2 install?
@budgetguncinema7777 Жыл бұрын
Sure thing! Send the parts over to me and I'll do a video and review!😅👍🏻👍🏻🍻
@VuCap-iz5tm4 ай бұрын
I have bought 2 for my M&P shield 40 coming find out only fit on the 6 round mag only not the 7 round mag
@budgetguncinema77774 ай бұрын
Yeah they aren't made for the extended Shield mags with the sleeves. However, I have one installed on my Shield .40 and I am able to get +2 extra rounds in there instead of the +1 indicated on the box.
@jeffkinder6865 Жыл бұрын
Would the MagGuts work with this extended baseplate?
@budgetguncinema7777 Жыл бұрын
I really don't know. I have not used MagGuts. Try it out. Worst case is you end up with two separate magazine extensions. 🍻
@seriesofcells Жыл бұрын
I ended up doing the 8 +2 and its a really tight fit. I have to really push my mag in to lock it into the gun. Is this bad if its under high tension like that? Also, when I screwed mine in I went too tight and it went all the way through. I retrieved the screw from inside the bottom of the mag and screwed it back in, but not as far the second time. Do you think this is okay?
@Silent-dee18 күн бұрын
How u make it fit doesnt mag doesnt clip in for me 🤦♂️
@StrictlyPlinking4 жыл бұрын
Those EMPs are worth every penny! Wtg!
@budgetguncinema77774 жыл бұрын
Heck yeah! I will be buying more for my 40 mags too. I put a lot of Strike Industries parts on my AR pistol and they seem to be a solid option for maximizing your 💥:💵 ratio! 😆👊🏻🍻
@StrictlyPlinking4 жыл бұрын
Budget Gun Cinema Their products kick ass! I’ll be installing a second GSR from them for my G20. The first one I got is so well made and agree with you on their reasonable pricing!
@jesselocs092 жыл бұрын
Just installed mine, I was not impressed. So hard to put the mag in the mag well, literally have to bang it in there. Like strike industries, this one isn’t it.
@budgetguncinema77772 жыл бұрын
Sorry to hear it's not working out for you. I did get one on my .40 mag and I was able to fit two extra rounds in it rather than just one so I'm surprised this gave you trouble. Appreciate you!👍🏻🍻
@seriesofcells Жыл бұрын
I am having the same issue. How is yours holding up? Do you think the tension like that is bad for the gun?
@budgetguncinema77773 ай бұрын
@@seriesofcellsstill working for me. Haven't noticed any substantial issues as far as the tension goes.
@rogerscott93324 ай бұрын
Cool.
@gunnwild14 жыл бұрын
I've had loctite on my fingers plenty of time, I didn't know there was a warning
@budgetguncinema77774 жыл бұрын
Same. Just figured since I was demonstrating how to do it, I should do it "responsibly". (heavy on the air quote gestures) Wouldn't want youboob to delete my video.😉👊🏻🍻
@OGkush69x2 жыл бұрын
Damn they never mentioned anything about locktite during the order or in the product description! Do you think anything will happen if you install without locktite ?
@budgetguncinema77772 жыл бұрын
Well thw worse that could happen is the baseplate could come off and your spring and ammo fall out. If you put the screw in tight and just check it periodically you should be good. It's just added reinforcement since there will be more pressure on your magazine spring. The unit installs pretty much like the factory plate aside from that.👊🏻🍻
@speedmaster0013 жыл бұрын
Can you please share a link where you bought your double magazine holster?
@budgetguncinema77773 жыл бұрын
Sure thing! Let me find it real quick.👍🏻
@budgetguncinema77773 жыл бұрын
Got it. It's from Versa Carry. They make them for single and double stack mags. 👍🏻🍻 versacarry.com/magazine-pouches/double-adjustable-magazine-pouch/
@speedmaster0013 жыл бұрын
@@budgetguncinema7777 cool thanks!
@StrictlyPlinking4 жыл бұрын
Super first to be 2nd!
@budgetguncinema77774 жыл бұрын
You been waiting too! 🤣🤣🤣
@alfonsorj703 жыл бұрын
It seem very technical to just install an extension Plate it’s complicated..that a bad selling point...XTech Tactical has a much easier system..check it out...
@budgetguncinema77773 жыл бұрын
Really? You slide a new base plate on, basically like a factory plate then two simple parts after that and that's very technical? Ok. I did take a look at that XTech Tactical. I like that their system works with both the 7 and 8 round mags, but dang that grip gets long with those 8 round mags! 😲😬