We had 3 Zetor tractors. Z 25K 1957, Z 7045 1981 & Z 6245 1990. Now we've got Case IH 1056 XL 1990, the best tractor we ever had.
@Sjanzo2 жыл бұрын
They leave the 4th gear in place because its not a gear, its just directly connecting the input shaft to the output shaft, where the layshaft and all gears arent loaded at all. Thats why you needed to change that input shaft with gear on it too, to close up the gap between the 2nd gear and the direct drive, which used to be your 4th.
@philipm10093 жыл бұрын
Class one lad only finding your channel now ,class job ,good crack 😎 🚜 legand
@jamiebryan57793 жыл бұрын
I'm the young lad who's mad into mechanics that never saw the inside of a gear box.
@Lebelo3 жыл бұрын
Fingers crossed🤞🏻🤞🏻. I'm anticipating same project on my 12245.
@TedTuned3 жыл бұрын
Laughing here. Class videos. I used work on them yokes when they were new, I delivered a pure solid HAYPE of balers with a 40k 12145! Some yoke. Bit terrifying on the brakes when ya would lep on them, at full tilt, mind. But sher that was part of the craic
@CianKenneally3 жыл бұрын
I can imagine 😂 I've all new brakes/expanders/cylinders ordered so she should be able to stop please god
@TedTuned3 жыл бұрын
@@CianKenneally tisn't too many yokes could pull to both sides of the road at the one time 😂
@georgedoorley56283 жыл бұрын
@@CianKenneallybeing religous is a help when driving a 40k version ...........
@cormacwalsh46183 жыл бұрын
Loving the vids boi
@WayneMescal3 жыл бұрын
2:48 Mastermilo 😂👍
@lorcanstewart37133 жыл бұрын
You have to swop gears around in box first gear you take out second gear is used for first 40k gear shaft will fit where 3was done lots of boxes years ago think I have few kits still
@CianKenneally3 жыл бұрын
Thanks Lorcan lots of mixed info online might have to quiz you on it if I can't figure it out when the stuff arrives
@JamesR46003 жыл бұрын
Brilliant videos lad 👌
@justinequinard6113 жыл бұрын
I’d be able to build my own tractor soon I’d say 😂👌😋😋
@georgedoorley56283 жыл бұрын
have you got yourself a workshop manual ........one helped me out no end with a same tractor .......they are a good job
@martink003 жыл бұрын
All that for 40k in a zetor. Madness. 30k would be grand. The lad towing you home will have 40k. 😂
@CianKenneally3 жыл бұрын
😂😂😂 27k is all she was doing
@martink003 жыл бұрын
@@CianKenneally fair play to you. Looking forward to seeing her out working next summer
@johnnykiely49053 жыл бұрын
It was a deer set of tyres and cab 🙈
@lorcanstewart37133 жыл бұрын
Simple enough just swop cogs around have to diegrind gearbox housing little bit to get bigger cog on shaft in also selector shaft in gearbox you said with hole in shaft for start switch was ant in late70 early80 I always fitted these shafts in gearbox with different drivers
@CianKenneally3 жыл бұрын
So I'm getting rid of first gear and moving all the gears back then? And putting in new gear where the old 3rd was? Ya I heard that alright but not sure if the older shafts can still be got?
@lorcanstewart37133 жыл бұрын
Might be wort trying Jer Clarke’s for selector is lift stuck up or down probity valve stuck must give you my mobile number
@CianKenneally3 жыл бұрын
@@lorcanstewart3713 lift is working now it was just airlocked,please do. message me on facebook if you like
@ducaconte58332 жыл бұрын
where do you get the spare parts of the zetor
@hookedonmodels84713 жыл бұрын
Some yoke
@paudiemcgrath38613 жыл бұрын
We have a 30k 9245 crystal and her H pattern is the same as what u drew there for the 40k. I thought all the crystals where the same pattern I can’t remember what the older ones where we had I was only a chap.
@dermotobrien68143 жыл бұрын
I have a 12045 and am looking to convert it too to 40k
@CianKenneally3 жыл бұрын
Keep an eye out for the next video I'll go through it all, still waiting on parts atm
@fordford91333 жыл бұрын
Maniac 2000
@peteracronin3 жыл бұрын
For the love of jaysus, You are a martyr for punishment, Fuckin hell!
@CianKenneally3 жыл бұрын
It wasn't actually as bad as I thought to take apart, still waiting on the new gears to arrive 🥵
@peteracronin3 жыл бұрын
@@CianKenneally an auld lad told me once that the Crystal was the most mechanic friendly designed tractor ever! Zetor even put in a seat in the back of the cab for the farmer to bring his mechanic everywhere with him 🤣🤣🤣 Good luck with it, looking forward to watching the progress 👍🏻
@matthewmurray2923 жыл бұрын
👍👍👍👍 mint. I have a 8011 Crystal. Could I b able to change it like urself. And where are you getting ur parts from ???
@CianKenneally3 жыл бұрын
A man in Denmark, I think he builds gearbox's for tractor pulling
@MrMike3533 жыл бұрын
I am just thinking about doing the same to my 8011. So whats needed, how much € and where do you get the bits
@CianKenneally3 жыл бұрын
@@MrMike353 DM me on insta or fb and I'll give you his details
@MrMike3533 жыл бұрын
@@CianKenneally Good man Thanks. Enjoying the videos of the progress
@dandooley22033 жыл бұрын
U go to it tralee.
@CianKenneally3 жыл бұрын
I did years ago
@dandooley22033 жыл бұрын
@@CianKenneally right it a good old spot. Just wondering where you got the gear to make the crystal 40k. As i have a 8111 and want to make it 40k
@CianKenneally3 жыл бұрын
@@dandooley2203 off a fella in Denmark, if you private message me on Facebook or Instagram I'll give you his details
@patlydon5193 жыл бұрын
Money and pit are starting to spring to mind with all this work. This is going nowhere, why dont you just do her up original, be worth more in the end
@CianKenneally3 жыл бұрын
Some of them came 40k originally but this one didnt, I want 40k for tractor runs