Stryker 655Hpc.Tutorial.!.😝👅🙌👑😇👮🎩👣🇺🇸👂💲 .....December 30, 2018

[@jsublett8871]

This is without a doubt the easiest and most simple description that I found on how to work this particular radio. Thank you very much for just keeping it simple and easy to understand.

[@pistolgripp127]

That's what I try to do at the hole in the wall non crooklyn Brooklyn New York CB shop

[@jsublett8871]

@@pistolgripp127 well I definitely appreciate it. I just got that same model radio except the one that I have has a built-in amp that the seller put in himself. But it was a little difficult trying to find a clear tutorial on everything but you made it so simple.

[@Steemoney]

Great video

[@stephenwalker1895]

Today I watched several videos trying to figure out why I was not modulating on the same radio. This is the only video that helped! Turns out I went from a Ranger 966 to the Stryker without getting familiar with the knobs. In short adjusting in the dark going down the road can screw it all up! Thanks for the great information!

[@pistolgripp127]

👊 Glad I was able to help & share easy understanding, any further shop# is in the ABOUT SECTION.! 👍👌✌

[@moarps]

You’re a genius man I bought this radio over year ago, worked really good when I first got it then I put a big ass in town on top my truck said it where I thought it needed to be based everything off the instruction manual from the radio. Then lightly it sounds like crap on the microphone I watched your video and adjusted my radio to the same settings and holy shit I’m reaching out and touching people. So thanks again I got this one saved

[@pistolgripp127]

It's what I do at the hole in the wall non-crookyn Brooklyn New York CB shop a pistol just went Bang.!

[@steveobeav8376]

Good job 👏

[@ramart06]

Thank you sir for this video for it is by far the best for the Stryker radio. I have had radio since 2015 and thanks to you I finally learned how to set it up properly. My friends can't believe how good my radio sounds. Thanks again.

[@pistolgripp127]

It's just a small portion of what I do at the hole-in-the-wall non Crooklyn Brooklyn New York CB shop.!

[@jplucky2743]

Exelente video. Gracias. Ty. 👌

[@pistolgripp127]

It's just some of the cool things I try to do at the hole in the wall non-crooklyn Brooklyn New York CB shop.! 👍👌✌ facebook.com/share/p/nfCST2NUh5iuEmUN/?mibextid=qi2Omg

[@austinprice2278]

After all day finally found this. Very helpful thanks

[@pistolgripp127]

Glad I can help. That's what my little hole-in-the-wall Messi Miracle Bench CB shop is all about.! 👊 If I could be of any further help the about section has my phone number just text the words CB radio. 👍👌✌

[@jeremiahfisher6994]

I'm trying to figure out how to dial in my swr.... just got my hooked up

[@pistolgripp127]

Call me.! 347-450-9757

[@jeremiahfisher6994]

@@pistolgripp127 I finally got it last year I just seen your comment I'm sry

[@FarmCreek86]

Thanks for the video, very helpful.

[@pistolgripp127]

kzbin.info/www/bejne/qqnNeneCfZ2foqs

[@MarcelLaPorte4346]

Appreciate the video, very helpful

[@mattboomerang7920]

Thank you! I done lost my mind. I changed mics and then couldn’t hear anyone, guess I moved the AM switch lol. (It’s been a long night lol). Thanks for the help.

[@pistolgripp127]

Glad I 👊 can shop info in about section.! 👍👌✌

[@marcos1689]

Are you any relation to Wolfman Jack?

[@pistolgripp127]

Why CERTAINLY.!

[@pigletlover3448]

Right on! I was looking for a video that shows pep with power all the way down. Now I have something to compare to my Galaxy 88 later. Thank you! 386 Tinman WI. Wavin!!

[@pistolgripp127]

Sir like night & day.! Your Galaxy 88 will do 35 pep full knob if right man tunes it up. But this radio P.E.P.'$ ANYWHERE FROM 60-160. THIS ONE I HAVE SET AT 60 PEP WITH 1.8 WATT DEADKEY. With variable in all the way left lowest position. Running through my 2-455 smart box driver.!

[@pigletlover3448]

@@pistolgripp127 right on! I drive a 2 pill Toshiba 2879 into an 8 pill donkey stomper with my Lincoln II plus age when the radio gets warm it starts to drop power a little. I'm looking for something that swings a little easier so I don't feel like I'm always having to yell. I need a 1 to 1.5 watt DK according to my meter. I already have the galaxy but it needs an alignment. Perhaps in the near future I will purchase a stryker. Do you recommend anyone to purchase from that sets them up as you describe?

[@michaelstewart4393]

I was given this Stryker sr665hp but the frequency for chan 19 is 28.6900. How can I change it to what it should be.

[@pistolgripp127]

Please call 347-450-9757

[@pistolgripp127]

I will gladly want to show you but I need you in front of a lit up radio to call me

[@celinacarpenter2022]

I did exactly as you said and my SWR is still too high. What do I do?

[@pistolgripp127]

Please Google CB repair shop Brooklyn New York City please call me or go to the about section of this channel my phone number is there

[@pistolgripp127]

It's going to be near impossible for me to rectify your problem like this

[@pistolgripp127]

This is a trusted brand. Just make sure it's fully stretched run without looping over itself.! www.amazon.com/Astatic-302-10267-Gray-Coaxial-Cable/dp/B000RG30CM/ref=sr_1_3?crid=1WOFUE6PP378J&dib=eyJ2IjoiMSJ9.Gw9DBymIoty7gl0tWqZE7jBVtWzbFht3zoFwC-dXv3G8Iz9cZchihvX1_fQbTp0jQ9biJpa7EKXbPI-LO4sRCck5RuYcOHdVZJIb9vdP2TtQIv-aEq8X69-LHklRzfMT9ptHGnu2VKfqyMyCKgwW-AOyHScGilLLCftuc-rJsPdySH2TvemKNf8U5JrOyEF9tFjyjEWmrx31_nDP3odTDr2KZqR1wMHwJc-5ZXvtb1Y.bu7zkuEcnuHSX6c0F4HHz9qcM20FYI5PHc1fNRKWi5U&dib_tag=se&keywords=astatic+coax+cable&qid=1709287883&sprefix=Astatic+coax+cable%2Caps%2C198&sr=8-3

[@reginaldallen6351]

I have that Stryker... I moved it from one truck to the next and NOW when I key up it reads SWR HI... I not getting out. What could that possibly be?

[@pistolgripp127]

Bad Antenna wire footage & connection simp!e shit here. Go to my about section, ph#. Text "CB Radio" and I'll talk guide you to perfection.!

[@Tony-rl2fr]

Excellent demo, thank you. Getting ready to pull the trigger on one of these and doing my research. One question: I saw a pro (not a hack) here on the youtube who said to remove a certain resistor from the board in order to use it as a CB... now I'm a little confused. So following your instructions, the resister does NOT need to be removed? I don't want to tweek/tune/jack-up a new radio... yet.

[@pistolgripp127]

No sir REMOVE NOTHING.! 😨 ALL PUSH BUTTON.!

[@Tony-rl2fr]

@@pistolgripp127 Awesome, nice to find someone that knows what the hell they're talking about. I appreciate your reply and all the good info, thank you!

[@pistolgripp127]

Happy to help.! Contact in ABOUT SECTION OF CHANNEL PISTOL GOES BANG

[@Tony-rl2fr]

@@pistolgripp127 I appreciate your handle consider I blew through about $100 in ammo spending quality time with my 14 year old son. Ammo prices and availability off the charts... Bu I digress. Anyway, 2 more questions: 1: Have you heard of ASYMOD 6, and if so, what's your take on that? The demo here in the tube is amazing sound. 2: I need a decent antenna for my work vehicle, company van so I can't drill holes, and I prefer a trunk lip mount vs magnetic, any suggestions? (Money IS an object, lol, maybe around $100 or less?)

[@jeremiahfisher6994]

Can i turn my talk back off without losing preformance

[@pistolgripp127]

Yes

[@MusicMinisterJP7]

Hi, interesting discovery. So if this radio is said not to get Cb channels, what is it for? I see it has a frequency meter, but no side band either?

[@pistolgripp127]

Well I believe you are seeing it operate on the CB channels

[@leonardoperez3550]

Can you make that same review on the striker 955? The buttons are different. M having problems hearing the come backs from the other drivers. Thx.

[@pistolgripp127]

Sir please go to about section call my phone # when you have 5 minutes in front of your radio & I will guide you on proper settings of all functions.!. Afternoon & pryme time good chance on touching base. HBD PISTOL.!. 👍👌✌

[@lonnien.clifton1113]

Sound king Brooklyn New York sounding good on the coast of North Carolina Carolina 4-barrel getting down

[@pistolgripp127]

👊 T.Y.! 👍👌✌

[@lukesalmon3953]

I just bought a 655 for my rig and did what you said in the video but mine for some reason shows 28.xx50, do you have to have these switched over?

[@pistolgripp127]

Yes its what I do.!

[@pistolgripp127]

kzbin.info/www/bejne/rYmQYXx7jcilisU

[@lukesalmon3953]

Oh ok lol I had bought it off of Amazon. Thanks for the video

[@pistolgripp127]

Best Source Of Purchase, 👊 YOU ARE BETTER THAN MOST.👂 My phone# is in about section. Or Google, "CB REPAIR SHOP.BROOKLYN NYC". I'VE DONE MANY.! 👍👌✌

[@unitylife]

Great video. I’m just getting into Radios and this was great help getting me setup. Thanks!

[@pistolgripp127]

Visit the ABOUT SECTION OF MY CHANNEL & Let Me know if can help.you.!

[@jovan3713]

I just bought this CB for my rig and I love it. Great video. Put me on to good music son! What's the name of the first song? I like this music. Never heard it.

[@pistolgripp127]

Jus Bcuz of Americas Most Hated 😨 F.B.I. Agent, 👊 it just happens 2 B my life'S STORY. ENJOY.! 👍👌✌ kzbin.info/www/bejne/r4aWlaKaqdxja9U

[@lowrider64able]

Do you have to program this CB or is it good to go out the box ?

[@pistolgripp127]

Simple faceplate simultaneous 3 button press.! Cb Ch#19 is not out box. Out box 10 meter radio. Unlock C.B. is 3buttons on face pressed in.!

[@briarfish5654]

How much to send my radio to you and have you tune it

[@pistolgripp127]

Go to about section of this channel, contact info & text CB RADIO.! 👍👌✌

[@pistolgripp127]

Or use google search CB REPAIR SHOP BROOKLYN NYC.

[@jasonmiller9495]

Nice video man

[@trx250rpuma4]

Which radio is better the 655 or the 955

[@MrBA812]

Rikki Jones 955 side band

[@dannyoatts6238]

What does NB stands for

[@pistolgripp127]

Noise Blanker & Nb/Anl is + Automatic noise limiter

[@BOGGYFORYOU]

Thank you buddy

[@russellhopperton1907]

The frequency doesn’t “align” with every channel number. Correct?

[@pistolgripp127]

For the most part no. Strykers are very accurate, but if External freq equipment tells U that the last set of hands in there messed up & alter the freq you will have to do it by channel, unlike 2950's where you can change your step freq & its set for all 40 as example.! Hope this helped any more feel free to contact Info's in about sections of channel's

[@bluehappyscrap]

AWESOME!!!😁🎈😁🎈😁🎈😁🎈😁🎈😁🎈😁🎈😁🎈😁🎈

[@chrisbennett8538]

Nice