STUCK ENGINE On My Dad's CHEAP New Tractor... Let's Try To Free It

[@chefmike9945]

Any video with your Dad is a great video. Cheers to you both.

[@dimitrig3739]

Your dad is ridiculously smart. His ability to understand mechanical things is wild.

[@69Dartman]

What a cool old tractor, and what 93 years old. I hope you guys get it unstuck and running eventually. Pretty amazing that the bores and everything else seems to be clean and unrusted after all this time sitting outside. When I was a teenager I loved old military trucks from ww2 and had a 41 early power wagon and some friends with similar trucks. You'd find one that had been sitting in a field for 20 years and throw some gas and battery in it most of the time with some points filing etc it would start and run. I remember a Carry All my buddy found that had 3 cracks in the block, milk shake for oil, and all the instruments were missing the needles. He got it to run with fresh oil and a tuneup and eventually it actually ran pretty good, didn't leak, and had oil pressure and one working rear brake. I think eventually he threw a better engine in it but it was amazing it ran and moved at all. Good luck with it, I bet you get it going.

[@NickK-ux4rb]

Two comments- #1. Your dad is awesome. Clearly an engineer. #2. Your dad and your brother are undeniably related. They look identical (I noticed in the cab over video)

[@kencrouch668]

All I have to say is: You and Jared need to spend as much time with your dad as possible! I can tell that he loves been around you two!

[@edpoints1127]

C'mon Jr, gotta keep us updated on this project. Beyond curious to see what Dad Ross and Co. comes up with to get it going!

[@beaumcdonald2427]

I love videos with your dad in them. That dude is so smart.

[@tthorntomcse]

My grandpa had one of those, I learned to drive a tractor on it. Same year 29' McCormick Deering. It had been converted from steel wheels to rubber tires, and had a box welded on behind the seat for carrying chains and stuff in, but otherwise looked the same. I helped my grandpa cut lots of firewood using the tractor to pull logs out of the woods, he had a small trailer made from the back half of an international scout we would pull behind the tractor too for all kinds of hauling around his property. Be careful of that hand crank, I think I came close to breaking my arm several times while starting it.

[@Don_ECHOguy]

I have both big brothers to your 10-20, a 15-30, and a 22-36 McCormick-Deering and they both run. On yours it still could be stuck pistons or even stuck valves or both. Might want to take the valve cover off and make sure the valves are free... if there is little wear on the guides it doesn't take much moisture to stick them solid. Good luck with it and hope to see it running in the near future.

[@Alex-B2357]

Dad needs his own channel.

[@jaywest4102]

Can we have a full tour of your dads shirt pockets? I’m certain he can diagnose and fix most problems with his EDC

[@davidenorth]

I bet a lot of us viewers are EDC nerds.

[@AdrianR84]

Pops needs his own channel. Great stuff.

[@watchjaredwork1487]

This felt much more violent in real life then how it looked on camera 😂

[@WatchJRGo]

The whole tractor was bouncing into the air 😳

[@jamesmedina2062]

@@WatchJRGo That damn ole tractor like a bucking bronco!

[@chaunceywilliams8405]

Dad rode that bucking bull all the way to the 8 second whistle.

[@dphoenix1]

@@WatchJRGo Next time, try pulling it in whatever functions as top gear in that thing to give more mechanical advantage to the wheels. I see a lot of people making this same mistake... yes, first/low *does* work best for bump/push starting an otherwise functioning engine, since it will rotate the engine over faster (increasing the likelihood of it starting), and the massive weight of a car gives it enough momentum to get the engine to rotate several times even when the car is only going a couple mph. But for un-sticking a stuck engine, top gear is definitely the way to go. If you think about it, the gear ratios work in reverse when the driven end is swapped... in low gear/low range, the engine has to make many revolutions to get one revolution of the wheel, vs. in high gear/high range, the engine makes fewer revolutions per one revolution of the wheel. Or, looking at it another way, consider going down a mountain in a vehicle; gravity has a much easier time accelerating the vehicle down the mountain if you're in top gear vs. if you're in first gear, because in first, the engine has to rotate much faster. So in the tractor, if you stick it in top gear and pull it, the wheels have more leverage to rotate the engine over more slowly.

[@PaulGinAZ68]

JR- Your dad is a treasure. He has a ton of practical knowledge and he reminds me of my father who is a few years older. It's a pleasure to watch these videos with the two of you interacting.

[@hackabilly4787]

your dad would flourish in a Mad Max world

[@bearing_aficionado]

Damn, back to back episodes with, Dad! We're not worthy, we're not worthy (sorry, but he's the real star when he is on the episode)!!!

[@raymondproseus6923]

His dad is such a natural teacher. I always pay more attention when he's on.

[@Spenno206]

Could listen to your dad all day. When’s the next shop update? Watching from the England keep up the good work

[@IKhanNot]

Love the videos where it's both JR and his Dad. So much knowledge and such a pleasant demeanor.

[@brandonmorris2513]

Video with pops in it are the best JR videos. The guy just knows stuff, everything !!

[@jeffreychapman6287]

Love when you have your dad on here. Love that guy.

[@stevetritle2101]

This is a great video. I’ve always said if I was a bachelor I’d weigh 300 lbs and have a yard full of old tractors and cars. They are too much fun. Thanks for sharing!

[@zoefaith120]

Daddies back and he got tractors! High speed 1929! Seriously they are the coolest rims every.

[@jaredwhite2285]

Episodes with your Dad are the best! What doesn't that guy know?

[@kerrylewis2581]

Family videos on this channel are some of my favorites.

[@paulfagan2964]

Very cool tractor. I always appreciate videos with your family in it!

[@Devastator0]

Dad Ross is the best! So glad to see him in another interesting vid. Keep up the great work!

[@SERMANDAVE]

I mean no disrespect to you JR, but I love videos with your Dad. He is a very neat, interesting and smart guy, your are lucky to have such a nice Dad.

[@glassvial]

Always love videos with WatchJRSenior, I hope to see you and your Dad working on this next Spring and get it up and running, an almost 100 year old tractor running again would be cool!

[@mr_jake.y8348]

Man your dad has some cool stuff. Love your channel Mr JR.

[@robertspear9134]

Any content with your dad is KZbin Gold. Makes me wonder about the John Deere crawler loader you had on the channel a fee years ago?

[@rollerdragon]

hey!!! Mr. Ross!!! good to see you.. love these episodes, john..

[@trapjohnson]

This is a piece that deserves a very light sanding and clear coat Patina preservation!!!

[@tombittikoffer412]

That's just CRAZY how clean that bottom end and everything is.

[@KyleGertner]

Cool. Hope you get it running.

[@KarelBeelaertsvanBlokland]

The two of you is an awesome Duo for the 'old stuff' Amazing to be working with your dad. He has a lot of experience. Interesting

[@markhancox5475]

Loving the access covers for the big end bearings-BMW should have used that design on their V8 and V10 engines 😂

[@snowyowl7042]

Nice to see you working with PA again. He makes an excellent teacher

[@aaron71]

Love the videos when you're working with your dad! And that tractor is AWESOME!!

[@braxtonnelson7422]

Now, I really want to see you guys getting the old tractor running!

[@louisdominguez7347]

Best JR episode I've seen, keep it coming. Love that old stuff.

[@Cartier_specialist]

Those tires will never wear out.

[@shh1234]

Somewhere, a donk aficionado is eyeing up those rears for a future project. Go big or go home

[@evanroberts4325]

I'm glad that you sold your building, especially if it means that we're going to be seeing more episodes with your dad and brother. The best episodes on your channel are the rough cut and impromptu videos of auction finds with your family. They are way more entertaining and fun to watch than the car detailing and junk supercar videos. Get back to your roots!

[@GEvans1983]

Dad Ross episodes are an automatic thumbs up!

[@ravenfeather7087]

I bought a shed found 1936 McDeering (?) F-12 that was seized up. Took the oil pan off and disconnected the rods from the crank. Tied a ;piece of binder twine to the end of each rod rod and jerked until they all moved. Put it back together, pulled it down the driveway, she fired and ran for years.

[@BFVgnr]

Another classic, looking forward to y'all getting it running.

[@Emmo213]

I found your channel because of the tractors you used to work on. Bring back the tractors!

[@daboonies8603]

What an awesome old tractor! Keep us updated!!👍👍

[@bustedknuckleworkshop]

Keep us updated on this project when your dad gets back to it. Cool old tractor

[@dougpark1025]

When I was a kid my dad had one of these sitting in the yard. We used to play on it. It never ran in my memory. Not sure where it got to, I believe a collector bought it many years ago. Would be cool to see this run.

[@GeorgeMcNally]

I love videos with your pop.......the apple doesn't fall from the tree :-)

[@Rigga-pw7nm]

I would love to see that running again

[@mratay4747]

Dads are freakin awesome!

[@DachsAutos]

Now you're talkin! Looking forward to seeing more of this on the channel!

[@WildDigger]

I love old tractors. My uncle collected them. He had a few Waterloo boys Deere and his 1910 Case IH steel wheel. Love his hit and miss deeres.

[@craigwcooley]

Just thinking out loud... do you think there is a transmission lock for parking? Like modern cars we use the PARK... maybe a seperate park lever? When they set it up using the belt drive for a saw mill... they don't want it to move... the must lock the transmission? Just a thought? Craig

[@joostderidder]

Continue the "oil-in-the-cylinders" -method for a few days. get the head off and check for stuck valves. That's the way I'd do it. Could the (crank)shaft be locked just at the rear bearing? (before the clutch?) Nice video. Thanks for uploading!

[@johntamlyn6383]

Beautiful! I live in London (no tractors at all), but I’ve friends who live in Devon (West country), and we’ve often been to shows where they have old tractors. John Deere, Field Marshal and Roadless, brilliant 👏👏

[@baldmann81850]

All the other commenters stole my thunder. LOVE the dad episodes, especially this one. More dad stuff please.

[@johna1160]

The Ross Boys. I think you're on to something there, JR.

[@danieljennerman7549]

There's one of those sunk up to its axles at my family's farm. It's been sitting there my entire life plus some (well over 40 years).

[@rickybailey7123]

So cool I love stuff like this it will run its so clean on the inside like it was all rebuild

[@angelarita7183]

It is good buy señor ,keep having fun

[@DBB-KE5DUO]

i ❤ your dad’s new old tractor!

[@zxggwrt]

That is fantastic! What a boss dad.

[@TheBobruub1]

Your old man is super cool.

[@mikemontgomery7337]

Always good to see our history brought back life and if anyone can do it it's your dad !!! Glad your there JR to hold his light and hand him the wrenches !!! Lol. Probably like your childhood !!!

[@wriddle082]

Maybe you ought to try one of those mixes that Vice Grip Garage likes to pour down into the cylinders to free up engines? I think he includes Brut after shave!

[@kkacperowski]

This is the type of watchjrgo i missed. heck yeah

[@CountrywideMotorCo]

@watchjrgo my kids have the exact same tractor in their school playground in FEILDING, New Zealand. It has been a fixture for many years. Great to see one complete.

[@johnmoruzzi7236]

Marty T will get it going for you !

[@titanicfilmsbymark]

You need to get this tractor running

[@fomocopowersgarage7103]

I love watching the videos with your father in them. I really miss mine.

[@jamesharber7820]

After you saw slight movement while pulling it forward I wonder why you did not pull it backwards in reverse gear=“rocking” it sometimes works wonders.

[@drewping2002]

Very cool old tractor!

[@sasanmottaghipour876]

Bummer! really hoped to see it live again :D

[@michaeluplandcausa7878]

JR. Watch JR Go shirts with the 1929 tractor 🚜 would be Awesome!!! Great video!! Live the family atmosphere 😊❤

[@explorerguy2002]

Still waiting for more on the JD420

[@bbls1490]

welcome back pops

[@ewallacestudent1]

Cool when your dad gets excited, good stuff.

[@richc9503]

Cool old tractor, it would be neat to see it run.

[@phenomanII]

In this episode, filmed while JR looks for a new WatchJRHome, we see WatchSRPlow in the least predictable way! That camshaft looked so nice, glad you're going to try to get it running.

[@31dknight]

another great video from JR. thanks

[@ernieleithes6545]

Your dad got get this going .

[@CR7659]

I have a carb that is darn similar to that one - I've been carrying it to car shows for like 15 years but never could figure out how to ID it. I just know it's a brass tractor carb and it weighs somewhere in the neighborhood of 10 lbs. Just in scrap brass it's worth a few bucks. Same cast in marking on it, the biggest difference is I think the side towards the front of the tractor has something mine doesn't. I'd love to see you guys get this running.

[@jamesmedina2062]

More tractors please!!!!!🚜

[@truthteller9743]

Be really cool video if we could get a tour of Dad's business and see what all they do there I know I'm very curious love any video with the family in it.

[@nospmohtekul]

Definitely do another video on this tractor with the family and get it running 👍🏻👍🏻

[@jonathanmaxwell326]

Seeing Dad in a video is as AUTOMATIC 👍! He should have his own channel (no disrespect to JR, of course).

[@plainbrownwrapper9688]

Hey whatever happened to that tracked John Deere where you sent the block to the machine shop. Never saw that put back together

[@WatchJRGo]

There’s actually a video where we put the engine together, it’s still on the engine stand 🍻

[@plainbrownwrapper9688]

@@WatchJRGo would love to see that thing going. Love tracked pieces of machinery

[@tonybaggett1984]

Seeing it run in it’s current state would look so much cooler than if it was fully restored.

[@jamesluke7377]

KC??? Bring that back home! LOL 🤣😂

[@danw6014]

Jack it up and rock the wheels back and forth everyday. Use high gear. Spray Free All in the cylinders. Diesel won't do much.

[@patmclean1951]

This brings me back to the crawler you had forever ago. Whatever happened to that?

[@sccarguy8242]

Papa Ross is the man. I have to ask where did he get all this knowledge ?? is he self taught, or did he goto school for this ??

[@alskjflaksjdflakjdf]

Man, you guys have all the cool toys.. John Deeres, McCormicks, old trucks. I'm envious! :)

[@johnboi8346]

I’d love to have a toy like that to play with! Just a little air in them wheels will be sweet!

[@jeep2003]

Ouch! If it aint broke we'll fix it till it is

[@NuffMan_]

Some of the early tractors had worm gear rear end, making it very difficult to turn the engine by the wheel

[@billtrefts9238]

Yes. My Fordson is that way. So rusty the hand crank is frozen.

[@SIXPACFISH]

I would go ATF after the 1st shot of diesel on the pistons. Diesel is good for penetration and cleaning, but bad for lubrication.

[@eyalbarmitzvah]

And on today's episode fonzy jumps the shark

[@suburban404]

Your Dad is the best! How is the car crusher??

[@glassvial]

JR said in previous comments they're STILL waiting on parts.

[@johnmoruzzi7236]

2 weeks ago Dad was looking real swanky in a gorgeous black supercharged Jaguar F-type….. and now…..