Рет қаралды 16,151
Stylish chairs made of barrels. Cool homemade iron barrel
☑ U shaped rubber hem - ali.pub/4rcguh
☑ Self-adhesive strip for protecting children - ali.pub/4rcgs5
💡 Circle circumference calculator - allcalc.ru/node/17
💰 How I earn 350 ye for 40 min per month - • ЗАРАБОТОК НА АЛИЭКСПРЕ...
💡 My channel SMART INCOME - • ЗАРАБОТОК НА АЛИЭКСПРЕ...
Today will be a cool homemade iron barrel. We will make garden furniture with our own hands, or rather stylish chairs from barrels. Stylish chairs from barrels will look not only in the garden, but also in the garage.
We’ll wash the barrels to start. As you can see, the barrels are not perfect. We will remove dents from the larger one later.
To make it comfortable to sit, the back and seat will be tilted. To do this, cut 30-35 centimeters of the upper part of the barrel at an angle. So that the cut was correct, I used the so-called health disk. Barrels in which diesel fuel, gasoline or a solvent was stored are pre-filled with water. There was oil in mine.
I will cut stylish chairs from barrels with a diamond disk for metal. Unlike abrasive ones, it does not break and sparks less, though it leaves large burrs around the edge. The edges are very sharp; wear gloves. Inside, a little oil remains, you can collect and put chainsaw chains on the grease. From two barrels it turned out almost a half liter. The lower parts are ready. Now mark the backs. I will have 9 cm thick foam pillows on my seat. So that the pillow does not slip from the chair out of the barrel, we leave a side height of 5 centimeters. If the side is higher, it will already interfere. Armrests can not do. But Cool homemade iron barrel will look better with armrests. To fix the armrest, do it yourself with 2 ears on each side. We clean the burrs. And bend the ears for the armrests. One out, the other inward. Next, connect the bottom to the top. But, for this, the lower parts of the barrel need to be cut along the edge, I will do this with scissors for metal, slightly bend inward. Now the top will sit perfectly in place. Stylish chairs from the barrels are already looming. One chair from the barrel I have already assembled. The second prepared for welding.
You can do without welding. Having fastened the top and bottom of the chair with metal screws. But welding will be faster and more reliable. He cooked like that ... He made potholders where the metal was snug against each other, after which he laid the chair on one side and bent his own cuts more tightly to the upper part and seized them with semi-automatic welding.
After which he passed the places of welding with a brush for metal. Cool DIY homemade iron barrel made almost ready! I painted my native paint a little with four hundred sandpaper and degreased everything that would be painted with a solvent. Painted with black primer on rust. This paint, unlike automotive paint, dries for almost a day. While the soil was drying up, I made two pillow covers with my own hands. Stylish chairs from the barrels will be with a soft top. The fabric did not buy. That I could beg of it and sewed. Sewed in haste ... .. I also wanted to cut the foam and make the armrests. Foam rubber used the old. He made the mold out of steel wire and cut it out in a minute or two with nichrome thread. Make armrests made of moisture-proof plywood. Cool homemade iron barrel will be with armrests! He marked graph termite right on the table and spread a disc on a tree with a disk. On wood drives for grinders last year I did a review. Edges polished by an orbital machine.
Cool homemade iron barrels are almost ready! The soil has dried up. After painting, it remains to fasten the armrests and garden furniture from the barrels is ready.
Ottomans in place one way or the other side ... Stylish chairs from the barrels are ready. And you can invite friends.
Cool homemade iron barrel weighs 14 kilograms. The barrel chair can be easily transported and put in any place.
Unlike chairs, this garden furniture from barrels will not fall into the sand. Not afraid of rain or frost. We remove only ottomans. Someone may ask a question regarding the sharp edges of the barrel and corners. The edges of the chair from the barrel are not so thin and sharp to cut about them.
Thanks to the back tilt, the stylish chairs made of iron barrels turned out to be very comfortable. Let this cool homemade iron barrel a little complicated, but very comfortable.
Now you know how to make furniture yourself from steel barrels.
That's all dear friends. For you, the author of the channel 1000 DIY's and Advice tried - 1000 DIY AND TIPS