Front & Rear Wall assembly with Terostat MS939 by Henkel

[@kcajmortsnnew1488]

i also question glue to styro strength....seems you'd want to glue to the outer panel , or finish the styro edges for better grip. and /or add L aluminum around the corners , not as pretty , but not much holding it together ...Styrofoam degrades , and the mess once the clue gives out wd be irreparable

[@unbr3akablonsoundcloud-tx6co]

Is this product suitable for eps with a polystyrene core ? I was interested in purchasing some, but couldn’t find anything about it being resistant to water

[@babylonslim]

So am I to understand that there is no inner metal ribs or cage for dimensional stability? How long before water impregnates then how much t replace a panel? What is the "R" Value of the walls?

[@TruckpromotioniMaxischermiLED]

good evening i'm italian i watch your very beautiful videos i have a question to ask you how do you get the elle where to then fit the panels and glue them?

[@StyroMAXInsulatedPanels]

Hi! We glue the rebate of the wall and roof and connect them. Then we run a bead of glue along the join to seal it. Much like you would in a bathroom or kitchen around the tile.

[@mickcollins5502]

Hi, how much are the pneumatic caulking guns to buy??

[@StyroMAXInsulatedPanels]

Hi Mick, you can check out our pneumatic gun on our website under the products tab. Www.styromax.com.au

[@austinelsaherd9012]

How do you finish the outside corners?

[@StyroMAXInsulatedPanels]

We have a couple of options for finishing trims. Check out the product videos on our KZbin channel or head to the products tab of www.StyroMAX.com.au

[@TruckpromotioniMaxischermiLED]

hello many thanks for the previous answer sorry my english, I use the translator ... I would like to ask you some more questions 1- how is the L-edge obtained where you glue with Teroson 939 MS? 2- is it possible to make a video showing the gluing of the two panels in gelcoat + Styrofoam? do you use a press? can it be done even without a press? what glue do you use? can you roller glue? 3 - Have I seen the 2.4 mm roll you buy from fiberglass in Italy? .Vetroresina.com? 4 what is the most used thickness? usually from roll + styrofoam.? pity that we are far away because you would be useful in your teachings and I would provide you a greeting Leonardo italiano ciao molte grazie della risposta precedente scusate il mio inglese, uso il traduttore ... Vorrei farle qualche altra domanda 1- come si ottiene il bordo elle L dove tu incolli con Teroson 939 MS? 2- è possibile realizzare un video do si vede l'incollaggio dei due pannelli in gelcoat + styrofoam.? usi una pressa? può essere fatto anche senza una pressa? che colla usi? si può dare a rullo colla? 3 Ho visto il rotolo da 2,4 mm che acquisti dalla vetroresina in Italia? da vetroresina.com ? 4 qual è lo spessore più utilizzato? di solito da rotolo + polistirolo? peccato che siamo lontani perché tu saresti utile nei tuoi insegnamenti e ti provvederei un saluto Leonardo

[@StyroMAXInsulatedPanels]

Hi Leonardo, 1- It is rebated on our CNC machine. 2- We receive the fibreglass with the gelcoat already applied. We simply bond it using a sandwich panel method. You should be able to find many videos already on this. do you use a press? We use a vacuum table. can it be done even without a press? Maybe, but it's not the application we use, so can not really comment. what glue do you use? Teroson adhesive can you roller glue? Yes, you can roll glue, just like paint. 3 - Have I seen the 2.4 mm roll you buy from fiberglass in Italy? .Vetroresina.com? Possibly! 4 what is the most used thickness? usually from roll + styrofoam.? We offer a range of different thicknesses, using a different combination of foam thickness and fibreglass thickness. Please feel free to contact us through our website for more information!

[@TruckpromotioniMaxischermiLED]

Thanks you have been kind if I need to contact you