Su-22M4 Fitter K FULL BUILD VIDEO Kovozávody Prostejov 1/72 Scale Model Aircraft

[@ИгорьДевяткин-х6э]

Очень аккуратная сборка! Словацкий вариант выглядит очень красиво! Привет из Комсомольска-на-Амуре - родины "Fitter"! 🤝

[@modelsforfun]

Что ж, спасибо тебе. Мне очень понравился ваш комментарий. Я рад, что у меня есть последователь с такого расстояния. Привет из Слованско. :)

[@septiccalling8341]

Beautiful job 👍🏻👌🏻👏🏻 There’s something about those old Soviet era monsters!

[@griffn14]

Great build! That complicated camo and weathering is spot on. 👍

[@modelsforfun]

Thank you very much 🙂

[@kapselek5861]

Excellent job with this not easy kit. One of the most beautiful soviet era planes :) Well done

[@modelsforfun]

Thanks 🙂

[@miroslavgabaj3379]

Neskutočne, pekné.Ked,zoberiem,tu,stavebnicu!!!???Prst, hore 👍👍👍👍👍👍

[@modelsforfun]

Ďakujem 🙂. Počkaj si na MiG-29AS.

[@petersmutny7002]

Nice build! Slovakia language Vďaka za použitie slovenských dekalií. 💓

[@modelsforfun]

Nieje zač. Ešte si určite v budúcnosti postavím pár slovenských mašín. Určite Frogfoot a Fulcrum stopercentne. Už mám na ne doma dekály a doplnky. 🙂

[@petersmutny7002]

@@modelsforfun super, budem sa tešiť na ďalšie videá...😉

[@neilhaas6024]

Wonderful build of the kit looking good. Nice model jet Sukhoi 22 M4 Fitter K fantastic work on model jet. The PE parts are nice too. I enjoyed this video on this build. 🤗😊😇😎🤓🤑👍🙌♥

[@fredtedstedman]

good work , nice to see Slovac camoflage , nice colours . Wales UK

[@modelsforfun]

Thank you very much 🙂

[@mir4959]

I had military service in 2002 in Malacky - Kuchyňa, where, these sukhois were dislocated. Together with SU 25

[@modelsforfun]

Staré dobré Súčka. ❤️ Škoda ich. Aj Su-25K budem robiť. 🙂

[@PavelSatsura]

Очень неплохо получилось! Удачи в дальнейших проектах. И привет с родины этого самолёта!

[@modelsforfun]

Спасибо. Привет из Словакии. :)

[@lubopittner1647]

Ahoj, kks to je vzrúšo pre oči :) nádherná kamufláž.. boli to krásne mašiny !!

[@modelsforfun]

Veď to. Ešte som si stihol pár chytiť v múzeu v Košiciach a na letisku v Nitre. Krásne stroje. Ja tie staré Súčka a MiGy jednoducho zbožňujem. Toľko rokov sú vyradené a stále sú krajšie ako západné šedivky.

[@Quadrant14]

Nice build, I have 2 of these big beasts in 1/48th scale to make as well. Same mould era, a lot of work but hopefully will look great thanks to Master pitot's and guns too

[@joebinish9358]

Nice build! I have the same kit on the to get at soon pile. Either with the recon pod from the 2 seater kit or with the BA-58 ARM pod and CH-26mP missiles

[@stanislavestok3377]

Konečne som pozrel video v kľude keďže máme víkend. Žasnem ako vieš robiť modely tvoja práca sa mi veľmi páči

[@modelsforfun]

Post a picture to my Facebook page when its finished. 🙂

[@modelsforfun]

Ďakujem. Je tam aj dosť trápenia. Ale stojí to za to 🙂

[@stanislavestok3377]

Mňa by to hneď odradilo keď je to sochári na tmelenia a tmelenia

[@modelsforfun]

@@stanislavestok3377 Model som robil v podstate mesiac, tak zase nebolo až také hrozne s tým tmelenim.

[@daffyduck5988]

Just perfect job👍 Pěkná prácička a super mašina.

[@modelsforfun]

Ďakujem kamarát 🙂

[@25hanusia]

beautiful job!

[@josecesar8657]

Gorgeous work!

[@Yves95128]

Hi, I'm a new subscriber. This Sukhoi is beautifully done, congratulations👍🏻💯

[@modelsforfun]

Hi. Thanks for subscribing. Im glad you like it. 🙂

[@muhannad2910]

Many thanks for all efforts, amagination

[@marcodidomenico3158]

Isn't an easy kit but I think that putty application on some part of the fuselage and the wing was necessary because is clear visible the gaps between the parts. Look of complete model is good but have imperfection that a little putty application could reduce.

[@modelsforfun]

Yes. Those imperfactions. I build my hobby for fun, but I must admit that sometimes Im moody, tired and lazy. Life is hard enought. 😑

[@maxzapatazanini5181]

Magnífico trabajo.!

[@SprueFascinationChannel]

Excellent build 😊👍

[@modelsforfun]

Thank you 🙂

[@DigitalSandwichProje]

Another great build! Looking forward to seeing completed MiG-25, as soon as I'm building the same one from ICM now, and waiting for your guidance regarding the paint job :D

[@modelsforfun]

Thank you very much 🙂. Yes, Im working on the ICMs Foxbat right now. Its already in paint. Want to Try some new techniques on the weathering 🙂.

[@Matus72svk]

Krásna práca, len čo je pravda.Tiez sa chcem pustiť do lietadiel, akurát ma odrádza fakt že používam len štetce a neviem či by lietadlá vyzerali dobre natreté, respektíve nafarbene špongiou.

[@modelsforfun]

Ďakujem.Roky rokúce som používal štetce. Keď som sa konečne odhodlal kúpiť si kompresor a striekaciu pištoľ začalo to byť o level lepšie. Maľovať štetcom je fajn, ale štetcom nespravíš takú povrchovú úpravu.

[@Matus72svk]

@@modelsforfun Hlavne sa mi nepáči prechod medzi farbami. Štetcom to je ostrá línia, kdežto striekanie je realistickejšie. A ak môžem otázku... Vieš mi poradiť? Chcem spraviť na figúrky 1:35 spraviť maskáče vzor ihličie, no za boha neviem ako. Ďakujem :)

[@modelsforfun]

@@Matus72svk Uff. Ja by som ich určite maľoval ručne. Maľovanie figúrok trvá dlho.

[@alessandrofavaro7722]

Looking good!

[@modelsforfun]

Thank you 🙂

[@deancass1799]

Very nice, sir.

[@michaelbenjmitchell1]

I did pick up the Italeri boxing of this kit which also says Bilek on it.

[@modelsforfun]

Yes it is. This kit reboxed a lot od time. Its still a solid kit.

[@marianhaluza8489]

Nádherná práca práca klobúk dole,,,, chcem sa spýtať čo to je za stavebnica prebal alebo originál kopro

[@modelsforfun]

Ahoj. Sú to staré formy. V tejto dobe ho asi zoženieš už len od Kovozávody Prostějov. V minulosti ho predával Italeri alebo Bílek, ale presne neviem odkiaľ sú to formy. Viem len, že sú dosť staré.

[@marianhaluza8489]

@@modelsforfun dík za info v každom prípade nepoznám veľa ľudí čo by to takto zvládlo ,,,rešpekt,,,

[@modelsforfun]

@@marianhaluza8489 Nebolo to až tak náročné. Len rezanie a dopasovávanie bolo trochu na nervy. 🙂

[@МирославСтойнев]

Добра работа!

[@joonaslehto4356]

I WOJULD LOVE TO OWN THIS AS SCALEMODEL

[@modelsforfun]

There is a lot of internet hobby shops. You can buy it.

[@thethirdman225]

Nice job.There just aren't enough options around for those of us who like Soviet era aircraft.

[@modelsforfun]

There is a Modelsvit kit. But its so expensive.

[@thethirdman225]

@@modelsforfun Thank you for the tip.🙂👍

[@miroslavgabaj3379]

Veď, hovorím.Rad sa na Tvoju robotu pozriem.Bude,celkom .fajn,keď, to porovnáme.To,som ozaj zvedavý.Tesim sa na foto"AS",aj na S MT.A odkiaľ,že si?Ja, Topoľčany

[@modelsforfun]

Bývam v jednej malej dedine blízko Prievidze.

[@pa446]

👌😌

[@stanislavfoltan]

celkom pekne ti to vyslo. to miesanie farieb je uplna alchymia. ja sa na toto tiez chystam, ale na tu novsiu kamo po generalke a farby som zobral od mr paint. tvoje video mi ale ulahci pracu s dohladavanim tych dalsich farieb, ako napr zelena na kryty a seda na podvozok. dik.

[@modelsforfun]

Nieje zač. Som rád že som mohol pomôcť 🙂

[@GoldTopPoland]

ładnie...

[@miroslavgabaj3379]

To,si pozriem.Ja, teraz,akurát robím MIG29 SMT,GWH.No, uvidíme.Tesim ,sa.!!!!1,48, myslím

[@modelsforfun]

Tiež ho robím v 1/48 od GWH. Už len pár krokov a bude hotový.

[@fischikawa]

Excellent work, but I think You have to improve your decal technic. Or please, use another decal softer, because your decals are too artifical. They don't bend int the panel lines, so I have the feeling that they are only decals not markings. And so You didn't weathering them really. Any other details of yours are great!

[@modelsforfun]

Thanks for the tip. I will pay more attention to decals. Btw. Im still learning more and more.

[@igorahn4841]

It's either Su 17m4 or Su 22

[@modelsforfun]

Su-22M4 is a export version of the Su-17M4

[@tom_wt3811]

môžeš vyskúšať tigra I môj najobľúbenejší tank a jeden aj práve skladám od značky zvezda

[@modelsforfun]

Mám ho doma. Skladal som ho tak začiatkom roka. Je k nemu aj video. 🙂

[@arghons.hobby.workshop]

Plasmo style? 😂

[@modelsforfun]

Not olny Plasmo like to upgrade his models. There are hundreds or maybe thousand modelers out there.

[@arghons.hobby.workshop]

@@modelsforfun I mean Plasmo video style 😏

[@modelsforfun]

@@arghons.hobby.workshop Its the most common video tutorial style today.

[@b.elzebub9252]

I bought this kit a while ago. It's been giving me so much trouble. The parts fit isn't great to say the least. And the instructions are beyond terrible. It's frustrating to see the potential of the model, but have it fight you every step of the way. Especially the landing gear part is beyond useless. It doesn't even show the underside of the model in the instructions. Its basically just: 'Yeah, glue these parts together and slap 'em on!' No details at all on how or where to place them.. The front gear covers even just appear suddenly in the next drawing with no instruction to place them at all! No part number, no nothing. They just materialise. I think I'll give Kovozávody Prostejov a pass next time. They're not the most expensive. But even so they're not worth the money tbh.

[@modelsforfun]

Hi. It depends how much effort you want to put in it. I always trying to plan my next build. Collect as much information and pictures as possible to make the build more relaxing. Yes, KP kits are old and tricky to build. A lot of patience is needed. Take your time. There is no time to rush things up.

[@АлексейРепницкий-ц7р]

Су-17М4!!!