New mini pcp digital gauges (review/ test)

[@Biffo1262]

The only issue I have as regards ANY built in rechargeable battery is recharging in the field. Yes you take your charging lead with you and a USB power pack IF you remember them. I always have button cells in my gun bags for my illuminated optical devices so changing them isn't a problem. Sods Law says I would forget charging lead and powerpack.

[@leec8592]

They look excellent gauges for the money and plenty accurate. Thanks for the comparison video.

[@sub12airgunners]

thanks for watching 😁

[@masterpai8174]

do you have the link where to buy this wika manometer?

[@bashm5767]

At the moment with my old digital gauge because my gauge is right way up and I have the side bracket for my gauge on my M3 I need to D gas the rifle and twist or remove the gauge to replace the battery. I think I will definitely be upgrading to this gauge👍🏼 Great and informative video as usual 👍🏼

[@sub12airgunners]

thanks for watching glad it was helpful 😁

[@chmarr]

guage one is supposed to read 230 but shows 229.2 which means it is off by 0.8, the 2nd one is 1.2 out, the analog is spot on and the last one is 1.0 out.

[@sub12airgunners]

If you look closely you can see the analog gauge is over by a couple of bar, but they are all within a couple of bar and that's good enough imo

[@Tim_Bassett]

A neat little gauge that - and I agree....just reading pressure is all you realy need. its a shame its not micro or usb c, however I really like the magnets "repelling" as you can't put the adapter in the wrong way. Just got to decide how many to buy....I got up to four, slapped myself and settled on two 🙂

[@sub12airgunners]

🤣🤣 they are neat and seem to work well 😀

[@three-phase562]

They look quite slick on something like the FX you have there, not sure about them on a a rifle with a more traditional gunstock though.

[@sub12airgunners]

yes i agree they look better on some guns 👍

[@PinkGirl2242]

Hiya, Excellent channel and quality videos. Will this fit my Artemis P15 without any modification please? Thank you x

[@sub12airgunners]

sorry not sure with the p15

[@eoinwestman6222]

Nice. If I change to a 300 bar bottle and a 300 bar gauge do I have to anything else to gun. Dies the warning on the gun for 250 bar max just for the original gauges as supplied from fx. Thank guys

[@sub12airgunners]

M3, Maverick, Panthera are all 300bar guns as far as i am aware just the bottle and gauge that need replacing

[@eoinwestman6222]

@@sub12airgunners thank you

[@jezza42]

Great informative video again, thankyou for sharing. Are all 3 gauges on the M3 the same 1/8th BSP thread please?

[@sub12airgunners]

Thanks for watching yes all the gauges on the M3 are 1/8 bsp 😁

[@jezza42]

@@sub12airgunners great, thanks for the swift reply 👍

[@OCDfish]

I’ve just bought one of these to put on the regulator of my Leshiy 2. The Sekhmet one I had previously was a lot quicker to change when the rifle was fired where as this one doesn’t alter even when fired quickly?

[@sub12airgunners]

we have 2 of these and they both work perfectly, it's not to tight and the o ring is restricting the air flow ?

[@OCDfish]

@@sub12airgunners the reg pressure is correct what it’s showing, but just doesn’t go down and then jump back up again when the rifle is fired. I’ve got the REPR reg which is faster to recover compared to the Huma raptor reg. It’s only just pinched up so don’t think it’s too tight.

[@peterprice5896]

Hi I have a question I have a bsa r12 clx pro and I’ve fitted a best fitting 500cc carbon bottle when I top up with my 3ltr carbon charging bottle it won’t go above 210bar so I assume the meter may be out would one of these digital meters fit my r12…..many thanks.

[@sub12airgunners]

sorry i haven't tried the 25mm gauge, i have replaced the BSA gauge with a standard 28mm wiki on my R12 that works well, you just can't use the little cover but it doesn't look bad i can't see any reason the 25mm digi wouldn't work though👍 sorry i can't be more help

[@peterprice5896]

@@sub12airgunnerscheers 👍

[@casperboo5465]

They look good to me Jeff, and accurate. nice bit of kit Cheers 👌👌👌👍👍👍👍

[@sub12airgunners]

Thanks very much 👍

[@simontanner]

They look very good and very interesting and informative video thanks 👍🏻

[@sub12airgunners]

Thanks very much 👍

[@martinhart1798]

Good video chaps, they look great on your rifle.

[@sub12airgunners]

Thanks very much 👍

[@UnCoolDad]

Can you replace the battery when it goes bad? Or do you just chuck the gauge away and buy a new one.

[@sub12airgunners]

i haven't tried to get the front off so don't know to be honest 😁

[@garybillington2239]

Have you got the heli board for the red wolf yet mate ?

[@sub12airgunners]

we will be doing that soon mate 😁

[@alvaroceron2069]

Friend, this m3 has a 600mm pipe, could you tell me where I can get the rails and the handle?

[@sub12airgunners]

Bagnall and Kirkwood Spares 😀

[@catherineharris4746]

💡Please How do you change it to psi?😭😭

[@sub12airgunners]

sorry i don't know

[@alanmullock381]

Quick measure time tomorrow methinks! Cheers Jeff👍👍👍👍👍👍👍👍👍👍👍

[@sub12airgunners]

😁

[@justinpatton740]

Wish I had the same experience with my gauge. Was reading 20 bar lower than other gauges and failed after one day. Air was blowing out threw the charging port. Waste of money.

[@sub12airgunners]

That's a great shame, we have had a few now with no issues at all

[@justinpatton740]

Yeah I bought mine off the back of your youtube video. It looks and feels well made and I was hoping it was as good as you said. Unfortunately not in my case. Hope others have better luck than I did. Love the videos by the way. Some good info in them.

[@GazzerG2000]

Will these new mini ones fit the Ghost?

[@sub12airgunners]

yes they will go on with no problems 👍

[@paulspeller968]

i think they are pretty smart and not to cumbersome at all cheers mate 👍

[@sub12airgunners]

Thanks very much 👍

[@lisawood516]

Nice Vid. Seems very accurate. 👍

[@dennis.oosthuizen]

Great video, thanks.

[@sub12airgunners]

thank you and thanks for watching 👍

[@joaobatistarodriguesmagalh8491]

Quantos dias dura a bateria?

[@sub12airgunners]

a long long time

[@eddienuttall2485]

Interesting video. Cheers👍👍

[@sub12airgunners]

thanks very much 👍

[@fish4london75]

For what is +/- 1% ish they really are value for money. 👍

[@sub12airgunners]

I have to agree, when you see the fx gauge is £145.00 and is about the same amount out 😁

[@stevec2739]

Good video Jeff

[@sub12airgunners]

thanks for watching 👍

[@johnvanberrgem286]

Are they more accurate?

[@sub12airgunners]

they are as good as most out there even the very expensive ones

[@steffanjones6295]

I love my edmu gauge Edgun

[@sub12airgunners]

yes our edmu worked very well

[@samhunting]

Nice gun 👍👍👍

[@sub12airgunners]

Thanks very much 👍

[@FreeFarmPestControlUK]

See these a couple weeks back on a US channel but no real details etc 😕 I'm glad you did a video on these mate 👍 as ever extremely well made and informative and more importantly details of where you got them 👏👏 Needless to say, fantastic job 😁👍 Ill be getting a couple of these for sure 👌 atb

[@sub12airgunners]

thanks there not bad for the money and as good as the £145.00 FX one 😁

[@jeffhello1444]

sweet 😁😁

[@dgg2412]

Look good to me

[@sub12airgunners]

thanks for watching 👍

[@sonan7216]

💠

[@sub12airgunners]

Thanks very much 👍

[@philipforbes4068]

Sehkmett ones are far superior with more functionality

[@sub12airgunners]

they do have more functionality but the most inaccurate of the ones tested

[@vinnydub7192]

@@sub12airgunners inaccurate I’ve just order two I hope they are not

[@philipforbes4068]

@@sub12airgunners do u have a link to the test you have done on them please

[@jeffhello1444]

@@vinnydub7192 1 bar out is nothing to worry about 😀 they where just the worst of the ones tested

[@jeffhello1444]

@@philipforbes4068 just watch the vid fx 114bar sehkmett 112bar Chinese 113.2 Keller test gauge 113.2 so the sechkmett not the best in that line up, but all good enough for a pcp

[@dangerous8333]

I don't trust digital air gauges. ✌️

[@Marcus1954s]

I don't trust chinese anything.

[@theprofitmohamhead1268]

Do you have any recommendations for a digital guage manufactured in a communist free country? I don't mind paying more for that.

[@sub12airgunners]

The Keller gauge from FX, made in switzerland £150.00 + post😀

[@daniellewis5413]

So do the old gages on my guns and don't need to charge neather !! 50 each and 10.00 pound electric 😮😮

[@sub12airgunners]

you can just stick with the old gauge if you want to 😁