SUBARU CVT ANTI-WOBBLE INSERT INSTALLATION | Forester, Crosstrek, Ascent, Outback & WRX

[@RoamRoadless]

So I was extremely skeptical of this working. But it did. I don’t understand why or how it fixed it. But it did. I got a two inch lift and was hearing a rattle noise with lots of vibration. After installing this and the carrier spacers, fixed it completely

[@JungleLoveOeOeO]

Nice

[@carlcolvin8320]

I have Outback Wilderness and before I bought I had them put it up on the rack so I could check out the undercarriage. IT DOES HAVE THE ANTI WOBBLE FACTORY INSTALLED

[@modre20]

Just installed this on my 2017 Forester xt, no more shaky transmission wobble!

[@decdragon]

I couldn't find an installing pdf on their website, but I figured it could be on KZbin and thankfully I found your video.

[@TheHumanCarJack]

Glad I could help

[@stevoalv2732]

Thanks for the content. I just installed this yesterday on my 18' FXT... I took out the 3 bolts on each side on that first plate and one bolt of three in the center... I bent the heat shield down a little to get my big hands in, lubed the rubber and popped that baby in. Took some effort but it popped in good. Alot less work but definitely wouldn't have tried it without your video so thanks again

[@ironman1518.]

Hello great post thank you. Which model of the insert did you use, the 60d softer version or the 85d 'stiffer' version, please? TIA.

[@K03sport]

+1 for taking the car to the next level. It's things like this that will hopefully wake up the manufacturer and they will start/include with better parts from the get go. Even non-enthusiasts can use less wobble. Even WRX's trans mount is too soft and it kills all shifter feel. Yes, less NVH, but no feel. Which is why I bought a group-n mount.

[@berserkerusmc7613]

Excellent video. Thanks.

[@JerryLilly]

great writeup! Thanks for this. Got it for my Outback and plan on tackling this in the coming days. Thanks again! and great looking Forester!

[@PRO4XKEV]

Did this 2 days ago on my 2018 FXT, great mod. I used the soft as well.

[@ironman1518.]

THANK YOU EXCELLENT VIDEO!! QUESTION, please? You happy with the 60d {Daily Driver} model or wish you'd gotten the 'stiffer version'? TIA. Which way is the block installed? The opening is toward the front of the car or the rear please? TIA.

[@j2dun]

Great video! What are the torque specs on the mount and bracket??

[@vjasper2]

Anyone know if this will fix the wobble from a new CV axle? Had a local shop replace my axe on the drivers side a few months ago and I've had a wobble when accelerating every since. Not sure if I should try this fix, or replace the CV axle with an OEM version, or just get a new transmission mount.

[@leonseewah4083]

Can't wait to know how different it feels

[@Fixall7]

With all due respect , anti seize isn't a lubricant or grease . Its purpose is in its name , To not seize a long term bolt . It would have been easier if you used bearing grease or a synthetic grease ...

[@JoseHernandez-tz6xl]

Bro! I’ve been putting parts in like a mother, I just do it cause it’s inspirational but man! I’m hurting for certain on some of these items. 14 fxt owner here

[@pellfan]

Great vid, many thanks!

[@GregsTurtleHaven]

Damn thats beautiful forester!

[@Borzoi86]

2010 OUTBACK 2.5 4-CYLIINDER HERE w/165K miles: When cold, our car is "jumping around" so much when idling that we need to put the transmission in neutral. The car is always maintained as recommended "by the book." When the car warms up, the problem disappears. Is this a reported problem, and if so, what will be the solution?

[@Currahee_1944]

Any idea if this works on Outback Wilderness. Thanks for the video

[@TheHumanCarJack]

It might. Message Anderson Fab, they're good at replying

[@austinecrow]

ADF is awesome, been looking forward to getting some of their gear for a while. The owner is pretty active on forums etc.

[@SuburbanBBQ]

Did you do a follow up video after driving with the insert installed?

[@TheHumanCarJack]

No because I didn't feel a substantial enough difference to merit a follow up tbh

[@0bserver416]

@@TheHumanCarJack We'd love to hear now after 6 months. Just reply it here.

[@Aurelio_E]

Got any update on this mod? Thanks for supporting FXT few channels do!

[@Sraccoon68]

All i had to do was drop one side of the heat shield so not to slice my wrists on the edges.. Other then that; greased up the rubber edges on the insert and popped it in. No problem.

[@freedom_foz_6337]

I do wonder which direction the insert enters. It seemed fairly easy to pop in there and I’m curious if you could have done that without remove it as you had considered.

[@TheHumanCarJack]

I probably could've but just removing the 4 screws made it pretty easy

[@amoni1959]

Nice. Most definitely gonna pick one of these up. 👍🏾

[@biagiocozza8875]

Great video. Thank you for making this video

[@TheHumanCarJack]

My pleasure bro! Thanks for watching

[@anthonyjulson8840]

Not gonna lie, i puckered up a bit wjen i saw you just start sending on them bolts😅😅

[@claymeyer5046]

I have an 2014 Forester that vibrates at about 20 - 30 mph. How do I know if it’s the engine mounts or the transmission mount?

[@TheHumanCarJack]

Put it in S# and see if the vibration happens only during "gear shifts"

[@claymeyer5046]

@@TheHumanCarJack Sorry, what does S# mean?

[@TheHumanCarJack]

In the Forester XT it's the sportiest drive mode

[@claymeyer5046]

@@TheHumanCarJack Ah. I don’t have that. I have the 2.5i Premium.

[@dr.keegan5303]

Does this work on manual transmission?

[@Subieguy30]

If your looking for something more durable without any cons for manual transmissions look into group N mounts great investment without a lot of noise decent price too

[@beardedpixel]

Great how-to. Any torque specs for all removed? Thanks

[@TheHumanCarJack]

Thanks and no I'm not exactly sure

[@Borzoi86]

What year is this Subaru?

[@TheHumanCarJack]

2017

[@SpottedOnTheRide]

Should have put it in dry... HI-YO!

[@TheHumanCarJack]

Smh 🤪

[@Cindy-rm5xu]

Hi, May I have your email? We would like to invite you to join us to review some auto products.

[@TheHumanCarJack]

Check the "about" section on my channel page