Sunday night machine review Kemppi Miniarc evo 200

[@iles1995]

Manual 1 & Manual 2 modes are high/low impedance, that control the rate of current rise. Use manual 1 mode for thinner repairs with thinner wires where it's important that heat is controlled and manual 2 for larger wires & anything substantial. I've had this welder for over 12 months now, I really can't fault it. Excellent Build quality and packs a real punch. I like the fact that in synergic automatic mode you have the option of letting the machine get you in the 'ball park' very quickly. For any sort of positional work I always default to manual mode so that you've got the ability to dial it in. I've done everything from auto repairs, to mobile structural jobs with this machine! It'll spray 0,8mm wire so can be used for mobile structural fabrication where that mode of transfer is permitted. I'd highly recommend this machine to anyone that's thinking of buying one!

[@Hood_Tyme_Fab]

Thats got to be the best earth clamp I've seen on a small machine

[@juusstube]

I have been using this machine for two years in really heavy use. The machine has been used in cold, hot, and dusty conditions. Works well ... Kemppi is the best welding machine, that's why I bought it.

[@robpinter5431]

I was recomended the Kempi Evo 200 by professional welders for my home use, fantastic welder well worth the money. Rolls Royce of welders.

[@roseironworks1393]

Thanks for sharing

[@duncansampson8120]

@@robpinter5431 yeah I bought one as my mate as had his 6yrs no trouble at all I love it just dial thickness then weld simple brilliant welder

[@JohnnyBravo02]

What other brands do you have experience with?

[@bisdakBAI3712]

Hi., does this machine can do gasless welding?,thank you

[@neilarmstrong3342]

hard to find a review in English, thank-you!

[@stuartandrews4344]

Having same problem.

[@ToreDL87]

Yeah the "problem" is the professionals that buy Kemppi and Esab don't have a need or time to put up reviews on KZbin. Kemppi is based in Finland, if and when you DO find a English speaking review, they won't be showing much welding either. Tellwin's and all the other China stuff is what most hobbyists buy, a.k.a why we don't get to see professional welders used on car sheetmetal, etc.

[@timallen6025]

Nice walk through, thank you.

[@roseironworks1393]

Glad you enjoyed it thanks very much

[@juancarlosvargasparada3308]

Gracias por su tiempo me ayudo bastante

[@neilarmstrong3342]

Would be really good to see how these run ally wire!

[@roseironworks1393]

keep an eye out on my channel, im going to give it a try

[@jamesyeo2947]

great video. have you still got the welder? if so how has it held up the past couple years

[@mattsan70]

Is the tension housing all made from plastic?

[@hilltroneye]

Hi , on my fuse box I got information about fuses.and my garage got B16 NHXB16 MCB.. If I buy this machine can I use I’mn my garage? Thanks

[@roseironworks1393]

Hi mate yes you should be fine with this

[@hilltroneye]

@@roseironworks1393 Thank you very much !!!

[@weldings]

Any problems with the torch trigger ?? My one been strange from new .. When you welding and then take finger off the trigger it still pumps out the wire live ! till you pull the trigger again , even then it still comes out live .. ?? only used if on few jobs .. Didnt know if theres a trigger mode i dont know about or its just faulty from new ?

[@roseironworks1393]

i have experienced sticking a few times, but my machine gets used a lot for taking car body stuff

[@Aabohax]

You can buy euro-adapter and use euro torch

[@Tuffjobs]

How easy is it to feed the wire? Thanks

[@roseironworks1393]

very easy, just don't let go of the end of the reel or it will birds nest and ruin your day !

[@roseironworks1393]

I'm slowly getting to grips with shooting these videos, cheers all

[@duncansampson8120]

a great video mate keep them coming you say it as it is just like people want

[@skybear51]

can i use argon only for gas?

[@scipiony]

Yes for aluminium but argon and c02 mix for steel

[@hotlinedubai1235]

Made in china?

[@hotlinedubai1235]

@Jåsøn ß thanks