SUNDOWN AUDIO - NEW PRODUCTS 2025

SUNDOWN AUDIO - NEW PRODUCTS 2025 - SEMA REVIEW

Рет қаралды 6,334

Күн бұрын

Пікірлер: 32

@u9Nails 2 ай бұрын

Halfway through looking at the Z-8 the camera jumps to the motor - I thought I was looking at a 12 or 15. That's a massive motor for a little 8! It wasn't until Jake put his hands back on the motor that the perspective corrected itself. Also, I see a Showtime Remy part time'ing it as a camera man in the polished motor end plate! Wish I was there!

@charlesking678 Ай бұрын

Yall gotta promote the sd series more. It's hands down the best shallow sub. Stomps the tw3 and can rival many full sized subs.

@jonathanesparza311 2 ай бұрын

Awesome 👍

@2DoorKC 2 ай бұрын

Amazing, I need 6 of these compacts!

@Kpaceguy Ай бұрын

I love it

@74midwestbass74 2 ай бұрын

Nice

@jody024 Ай бұрын

When measurements matter, they're in metric. 👍

@SuperNoticer Ай бұрын

Looking to build a box under the rear seat of my Extended Cab Silverado for two SA V2 10's, forward firing. I will raise the seat however much I need to. But I'm unsure of what port design would work best for this setup. I will have 1 sub on each side. So one large port firing out the side at the rear, or 2 ports firing out the side at the rear, or 1 large port firing out the front in the middle?

@MannuhFestIt 2 ай бұрын

I'm just impatiently waiting for the M series. I just wonder about its efficiency since it can play in sealed as well.

@2DoorKC 2 ай бұрын

It's out

@MannuhFestIt Ай бұрын

@@2DoorKC only for preorder, plus no t/s parameters yet which is what I'm REALLY waiting for

@2DoorKC Ай бұрын

@@MannuhFestIt guess cuz I'm on team sundown I could get my hands on em

@ChanceShaw 27 күн бұрын

T/S on the D1 18 Revc=2.050 Ohm Fe=26.418 Hz Sd=113.411m M2Md=610.000 g BL-17.405 TA Qms= 2.592 Qes= 0.694 Qts= 0.547 No= 0.276% SPLo= 86.4 dB Yas=107.328 Ltr Cms=58.765m mm/N Krm=32.340m Ohm Erm=0.654 Mms=617.637 g Mmd=595.676m Kg Kxm=61.113m H Exm=0.594

@edoubleist 2 ай бұрын

I’m anxious to know what the release dates and prices are for the SA-1T and SA-3M. They maybe perfect for my sound quality a-pillar build.

@NerdyBassHead 2 ай бұрын

Been waiting on that m series for awhile Would be nice to have a lower powered system, like 2 m 18s in a 6th would be insane on 5k clamped and clean

@91rickstar 2 ай бұрын

What’s with the weird voice coil sizes 2.75 -> 3” 3.3” -> 3.5” or 4”

@jacobfuller9893 2 ай бұрын

For the Z-8 I tested a 3 inch and it was significantly inferior. Less linear. Less stroke. And wears out the spider faster. The 2.75 was perfect. The 3.3s are new to us but we'll be using it more often. Gains about 15% surface area without losing much spider - almost no appreciable amount.

@CrystalClearSQL Ай бұрын

Great question, and answer... Good stuff

@nts3561 Ай бұрын

Zv7 is not concerned with 2025? What about Inhuman 18?

@devencherry8976 2 ай бұрын

how do the neo pro 12's compare to the vex 10's?

@JasonWW2000 2 ай бұрын

I just assumed that manufacturers would step up the voice coil wire gauge, like from 26 to 24, when they are building a lower impedance coil. That way the thickness of the voice coil would be very similar in either impedance. I don't know, I might be oversimplifying it. Lol

@Simpleman1078 2 ай бұрын

I think Jacob doesn't need your advice... I think he knows what he's doing.... lol

@jacobfuller9893 2 ай бұрын

Generally doesn't work out that way. The lower impedance is generally significantly fatter in round wires. Flat wire alleviates this issue nicely but has its own drawbacks. I've developed a round wire winding method to keep round wire coils about the same OD between the two coils - it's pretty novel and I've been using it in the X8 since the V1.