[SUNFLAME] BOILER Rotary Cup Burner Overhaul | Marine Engineering | Technical Vlog : 012

Rotary Cup Burner of Boiler should be cleaned regularly (or) base upon dirt condition.
Accumulation large amount of sludge on inner of rotary cup can cause misalignment in rotary cup rotation, that leads to damage in rotary cup burner.
MAKER. : SUNFLAME
MODEL. : SDR - 1500
#Boiler #marineengineering #engineroom #rotarycup #burner #overhauling #maintenance #steam
/ @moemyintshein1987

[@aungphyopaingmyint4813]

ကျေးဇူးပါအစ်ကိုရေ

[@kyawkyawaung1812]

ကျေးဇူးပါအကိုကြီးရေ ကျနော် ခုတက်မယ့် သင်္ဘောက sunflame rotary cup burner ဆိုတော့ တကယ့်ကိုအဆင်သင့်လိုက်တာဗျာ ကျေးဇူးပါ ♥️

[@MoeMyintShein1987]

အဆင်ပြေပါစေ။ 😊

[@mhundred267]

ကျေးဇူးတင်ပါတယ် ခင်ဗျာ

[@MoeMyintShein1987]

Welcome ပါ။ 😊

[@nyeinchenaung4981]

Thank you Sir

[@MoeMyintShein1987]

Welcome !!!

[@crispinantonio1959]

sir do you have a video for burner oil distributor overhauling?thanks

[@MoeMyintShein1987]

Burner Shaft Overhaul Video had been uploaded on my Channel. I hope you can find in that video for the thing you mentioned. Can easily search from channel playlist "AUXILIARY BOILER”.

[@MoeMyintShein1987]

[SUNFLAME] BOILER Shaft Overhaul & Shaft Bearing Renewing | Marine Engineering | kzbin.info/www/bejne/l6HKd5mjoLebrrM

[@storytelling2307]

Sir ,what is the topick ,when we are interview about the boiler? ,please tell me sir😊😊

[@MoeMyintShein1987]

Do you mean THROUGHPUT for boiler ?

[@Penny-is-pretty]

Good day sir, my problem is when my boiler last part of combustion (DO mix) it produces black smoke, only on that part,. What will be the cause? And what can i adjust sir? Thanks in advance

[@MoeMyintShein1987]

Please, let me know maker and model of your boiler for detail troubleshooting.

[@Penny-is-pretty]

The same maker and model in your video sir, kyoto sunflame co.. Ltd, SDR-1500

[@MoeMyintShein1987]

@Penny-is-pretty As First, please check the distance between tips of air nozzle and cup. It should be 2.0mm. If not in limit, adjust it.

[@Penny-is-pretty]

I already checked and measure the clearance between air nozzle and rotary cup and within the limit 2mm,but still black smoke coming out at the end of combustion sir

[@MoeMyintShein1987]

@Penny-is-pretty Please check links of secondary air line and lubricate. Adjust link of secondary air line damper to enter more fresh air.

[@azizulenam7318]

What is the name of your company? Is it MOL chemical tankers? Great video. Looking forward to see bearing change of the burner.

[@MoeMyintShein1987]

MTM Ship Management. Thanks for your big hands. 😊

[@MoeMyintShein1987]

[SUNFLAME] BOILER Shaft Overhaul & Shaft Bearing Renewing | Marine Engineering | kzbin.info/www/bejne/l6HKd5mjoLebrrM

[@mec6953]

your burner is broken. cant repair. but you need to produce steam. how will you do that😥!? your burner nozzle is not working fine, you dont have spare parts, how to continue boiler operation! Sir, is there any way to start up boiler without burner? or bypassing it? most probably he wanted to know this

[@MoeMyintShein1987]

In port, raise requisition spare parts or call shore assist. Failure of Boiler also can affect SOLAS Chapter - 2. At sea, reduces steam consumption and use steam from EGE. Sometimes, incinerator pilot nozzle and boiler pilot nozzle is same. 😊

[@MoeMyintShein1987]

😁

[@mec6953]

Hello sir lets pretend, you are in port, your boiler is giving black smoke to the funnel. now PSC wont allow you to run boiler with black smoke. you tried everything to check why black smoke is coming out. but still black smoke. also you need to produce steam. in that situation how will you manage this?

[@MoeMyintShein1987]

Adjust and Increase Air Damper Until Clear Smoke Comes Out. He wants to adjust Fuel and Air Ratio. 😊