SunGoldPower 24V Parameter Setup

[@jayhulk9036]

Thanks I was so lost, much appreciated 🙏

[@gchacon316]

I jotted down the settings you went thru because some of it is vague in the manual. However, I have some Battle Born batteries that I'll leave in place. I called their tech support to review the settings for the Lithium battery profile. They furnished me with all the parameters for their battery profile using this unit. Very nice people. I will share them when I verify they all work. When I finish gathering my components (about 2 weeks), I'll be installing my unit. Hopefully I can add to your video for other people looking for information on this unit. Thank you for the help.

[@mister.beastly]

Thank you very much. I just "Liked & Subscribed"

[@sandyponcerodriguez]

I have the 5000w model, but the interface is about 90% the same, so this was an excellent starting point for me. Thank you!

[@fpmd99]

Very helpful! Thank you so much!

[@coopernorman5016]

Battery setting corresponds to number of primary 3 vdc cells deployed in array: 12 vdc = 4 24 vdc = 8 36 bdc = 12 48 vdc = 16

[@khazamulahlongwane3239]

why is my solars not apearing at my invanter screan and y its not charging

[@homeinsteadseligman]

Great questions. I'll be honest I don't know. I had to get a hold of them a few times and man was it tricky. I had to use WhatsApp to get a hold of them

[@kurtmarshall-y2c]

Thanks so much great video, all my parameters Answered,I also like how you Stated where you got your information, I emailed them and never got an Answer, Thanks Again

[@homeinsteadseligman]

You're welcome! I'm still learning so if or you figure out something let me know

[@kurtmarshall-y2c]

@@homeinsteadseligman So at your settings my all in one was not Charging my two 24v Lifepo4 Batteries it was down to 26.4 v,so I changed the Parameters on #37 to 28.6v and it started charging, it just stopped charging at 28.5 volts which my Battery monitor said 82%capacity 382ah out of 440ah, so I have my smart charger finishing of the charge and it will tell me the ah it put in etc, I'm mainly boondockin so I need my Batteries kept as full as possible,

[@kurtmarshall-y2c]

Also read some articles on will Prowse solar power forum and a few guys Stated that there AIOs don't put out 14.6v for lifepo4 batteries which sun gold power techs said it's a design flaw but still works, the People on the forum and I disagree that long term under voltage charging will ruin the Batteries, I could only get a reading of 13.6v

[@homeinsteadseligman]

I'll have to check what mine are reading.

[@miatrny]

Thanks for the video! We have the same system and I’m going through the same thing as you right now with the emailing! how has it been working for you?

[@homeinsteadseligman]

Sorry for the late response. It's working great now. Had a bunch of issues in the beginning but now ww are good

[@thatguyPat84]

Just got the 3000w and have not a clue about it

[@homeinsteadseligman]

I had to use WhatsApp to get a hold of them. I had a bunch of issues with them early on and now they seem more helpful

[@MkatekoChestar]

Hello Sir please help out i have a brand new hybrid buy when i plug a fridge the inverter fan start yo run non stop and when i plug my t.v the pictures are not clear with vertical lines as well what could be the problem?

[@homeinsteadseligman]

Unfortunately im not sure. Once I plugged everything in it finally worked. Getting a hold of the Company was tricky.

[@gchacon316]

Oh yeah, how's the system running?

[@homeinsteadseligman]

Sorry it's taken so long to respond. So far so good.

[@sawzallmanken253]

THANKS -- Saved y ass -- KEN

[@LloydJarvis]

Tell me about the waiting, it's been a horrible experience for me. Don't recommend this company.

[@PraiseGodFirst]

I've had nothing but the best, with Sungold solar products. Maybe you did something wrong?