SUP Seam Repair

How to repair the seam on an inflatable SUP.
Supplies: Quick-Grip Bark Clamp: amzn.to/35UJhdo
Vinyl Cement: amzn.to/3DWIntA
Vinyl Disposable Gloves: amzn.to/3KrZSV4
Methyl Ethyl Ketone: amzn.to/3776z0n
Q-tips: amzn.to/3KqCXcB
Exfoliating Rounds: amzn.to/3unHDKH

[@TheGusMorrisShow]

I really needed to see how to apply the clamps

[@flmoseley8141]

A far more effective and easier method is to first clean the whole area with solvent then rough the area then just run a couple of coat of the 66 glue over the seams. Let that dry then cut a larger pvc patch and then glue that over that whole 4x4 area. Weight it down over night and wala sealed. Wouldn't even notice the patch. I do this stuff all the time.

[@robbyrob25x]

Watched 7 minutes of you washing the board, only to have you skip the clamping!

[@asypeer1]

Is it still holding air?

[@Erin-lk7kb]

Can you use acetone or isopropyl alchohol?

[@coconutjive4359]

Do you have a pic of the clamp set up?

[@Seb.chartrand]

Thanks!

[@coconutjive4359]

Good video otherwise....