SUPER CHARGE your Live Sonar: Amped Outdoors 48AmpHr 14.8 Volt Lithium Battery

[@911Getsome]

Did some homework on this. Russell marine did test using 12v - and even 24v to live scope. There was no increase in picture quality whatsoever. There are other YT videos where some guys tried the 16v lithium to livescope w no better performance. Thanks for video !

[@dunderwood396]

Great video. Same here I switched to the 32 amp hr and I’m actually seeing my double 1/4 oz jig heads crappie fishing. It really makes a world of difference. Good fishing 👍

[@fuzzyfultz]

45 Amp Hr Amped Outdoors here. Awesome Lithium batteries. Runs my Garmin 93sv UHD and my LVS 34 no problem all day fishing. You won’t go wrong with these. Small light 7 lb battery I out it in a small ammo box and added the charger as well. Thanks for sharing.

[@DanMietchen]

Good video and info

[@ChadMcKenzie-ot6bu]

We need to know the settings please.

[@glenndaugherity6187]

Great video ! What’s more critical running the actual unit off this battery or the module box ? Thanks

[@unclejjj2]

What about the 30ah to a 75Sv but no livescope would it be less clear then the 32ah battery as the 30 is 12.6V and the 32 is 14.8V.

[@daviddincler7494]

Connecting my 32 ampoutdoor battery to my fuse block so I can connect to 2 garmin 73sv and livescope what size wire to fuseblock

[@jameskarr5550]

Ty for Video!! Where did U mount transducer, on trolling motor? I’m looking at a Garmin 1022 and how to mount transducer..

[@thebasswicker6294]

Great information thanks

[@joeystreet5412]

What size battery did u install I have the garman live scope I want to get that same pic

[@kurtfredregill3324]

What are your setting on you unit gain and color gain and the other settings please, thanks

[@ciscokid2444]

Would 32ah be as good or should I stick with 48?

[@DavidMccallister65]

Are you running all your units to that battery or are you only running the Garmin and livescope off the lithium battery?

[@Randy-gz8eu]

Do u have a dedicated power switch on it ? Can I use my main switch in the boat ?

[@markcarwile5462]

Is you run farther than 15 ft with the 10awg wire? just wondering because I'm fixing to wire mine up and having a hard time finding 8 gauge end terminals.

[@TheBasshunter12748]

If you have a second could you send me links/names of the accessories you used for your install? Battery tray, on off switch, fuse box ect

[@cannonballmodelshop2240]

are you running both the black box and unit off of 1 10 ga. wire

[@sohobassguy3749]

Yessir straight from the battery to black box and unit 1, 10 gauge wire!

[@russhood6747]

I used a Dewalt 20 volt battery with a Seelite battery cost low low low compared to the big lithium battery companies offer.

[@southerngurlfishing2561]

Are you on Center Hill Lake 👀 🤔

[@mrlrgmouth3692]

So are you running the unitnamd livescooe on the same battery. And which battery is that .16v 14v? Ah?

[@earnestvance2239]

what type of charger do you use for it? also, are you running the box and graph of it?

[@sohobassguy3749]

I'm running only the GLS10 Black box and the unit off the amped battery, run a 10-gauge wire from the battery through an on/off switch to the black box and unit only that prevents any chance of interference.

[@thezoo7876]

Got a couple questions can you run your others electronics off it also

[@sohobassguy3749]

'm running only the GLS10 Black box and the unit off the amped battery, run a 10-gauge wire from the battery through an on/off switch to the black box and unit only that prevents any chance of interference.

[@cryptojohnny7781]

Higher voltage batteries does nothing for visual but being dedicated will.

[@MrLukevan]

Well, well, that is an eye opener. I only see my baits coming as of 40 feet maximum. So you see them consistently as of 70 feet, even in murky water?

[@sohobassguy3749]

Yessir, you also have to think the bait pictured was a 3 inch damiki. Something larger like an Arig or a jerkbait you can see much farther out.

[@thezoo7876]

@@sohobassguy3749 are you running just the garmin Or all your electronics

[@glenn5077]

16 .8 v ???????? @ 2.12

[@ryanbiscobarnes]

What's the outfit you are wearing in this video.

[@joeywelch1]

Doesn’t make any difference if it’s 24v or 12v. If you are seeing a better performance in higher voltage batteries then your wiring or connections are the issue.

[@ChadMcKenzie-ot6bu]

We need to know the settings please.