Tap to unmute

SUPER CHARGING Nutcase my 1962 Ford Falcon: Generator to One Wire Alternator Conversion

  Рет қаралды 30,071

RevStoration

RevStoration

Күн бұрын

Пікірлер: 354
@wicknalkermusic
@wicknalkermusic 3 жыл бұрын
Hey Rev I've been following your channel since below 10k subs and I gotta say, next to Vice Grip Garage this is the most wholesome auto content on KZbin. Your channel is terribly underrated and your videos are always fun to watch and entertaining. Please never stop doing what you do, I love watching you and the old man work on these old diamonds. And all the old car guys I work with love it too (the ones who know how to use the internet) haha
@RevStoration
@RevStoration 3 жыл бұрын
Wow.. Being in the same boat as Derek is an honor. He is the best and I am honored that you watch... God Bless.
@charlesking1244
@charlesking1244 3 жыл бұрын
Good Seeing You Rev, Getting Nutcase Back In Order.. Be Blessed Good Sir..
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Charles
@Glock30Fan
@Glock30Fan 3 жыл бұрын
As the head of my household, I ALWAYS get the last word. And those words are usually "Yes, dear." Great video. Sorry to have missed the premier.
@nikkitwheeler162
@nikkitwheeler162 3 жыл бұрын
Great last words, Tim!! 🤣😂
@DavidSmith-tz9bx
@DavidSmith-tz9bx 3 жыл бұрын
thats the way I run my house too
@RevStoration
@RevStoration 3 жыл бұрын
Me too Tim... Me too.
@terryeustice5399
@terryeustice5399 3 жыл бұрын
Well you did what you said. Switched the generator to an alternator. Great job Rev.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Terry
@tommyhall8301
@tommyhall8301 3 жыл бұрын
How are you an family doing. Great I hope great to see yall again. Good luck with the cars see you soon buddy.
@RevStoration
@RevStoration 3 жыл бұрын
We are great... Thanks for watching..
@chrisgroote6516
@chrisgroote6516 2 жыл бұрын
Well done! Another great alternator to use with these old Fords is the 3G units common to the mid-1990s. I just got done bolting up a Taurus 3G 130 amp to my 1968 Ford FE powered dually, and like your one wire, it cleans up so much of the old harness and gives a LOT more useable juice. Great stuff, and thanks from an old Conyers guy.
@RevStoration
@RevStoration 2 жыл бұрын
Thanks for sharing.. We are around Conyers often... if you ever see us say hello.
@c7d3p
@c7d3p 3 жыл бұрын
I do like some Puddins' Fab shop too.
@RevStoration
@RevStoration 3 жыл бұрын
No one on youtube can rap like Puddin... that is meant as a compliment.
@holgerwittmann8419
@holgerwittmann8419 3 жыл бұрын
What a nice spraycan that is. Nice work in general.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Holger
@tonylashmit2613
@tonylashmit2613 3 жыл бұрын
I'm sure you've heard the old saying "I MAY RULE THE ROOST BUT THE WIFE RULES THE ROOSTER "
@RevStoration
@RevStoration 3 жыл бұрын
Amen... He has before.
@grada9433
@grada9433 3 жыл бұрын
I love how that falcon sounds
@RevStoration
@RevStoration 3 жыл бұрын
Me too brother
@pookysdad4884
@pookysdad4884 3 жыл бұрын
Man, I never seen a guy with so many cool old Fords. You're darn good at finding 'em, Rev. I'm a good car finder, but you're a MASTER! I have to compete with all the demolition derby idiots destroying all the big ol' boats.
@RevStoration
@RevStoration 3 жыл бұрын
They are fun and a lot of work..
@gillgetter3004
@gillgetter3004 3 жыл бұрын
You did it generator to alternator, now the tricky part sorting out the correct wiring, I’ve done it on a couple old GM’s from the forty’s. Made up new harnesses from scratch. Try to find a copy of wiring specs should be available from chilton or Hayes or even Ford. Solder gun, heat gun kit of schrink tubes, correct gage wire and large tabletop to tack harness to good luck
@RevStoration
@RevStoration 3 жыл бұрын
I have the wiring diagrams and I will get the light working soon.
@danswartwood4580
@danswartwood4580 3 жыл бұрын
Thank you for the appreciation David.
@RevStoration
@RevStoration 3 жыл бұрын
It is honest and I do.
@JoKeR-qu3ut
@JoKeR-qu3ut 3 жыл бұрын
There are two spade terminals on the back of the alternator marked 1 and 2 on the case. There is a small yellow w/black strip wire that goes to the armature terminal on the voltage regulator that you want to connect to terminal 1 on your new alternator, that'll get your dash light working. I did the exact same thing on my '62, as my generator was putting out 18 volts.
@RevStoration
@RevStoration 3 жыл бұрын
I will have to look closer.. I have my signal wire but the one wire alternator does not have any other places to wire..
@MrMeddle2243
@MrMeddle2243 3 жыл бұрын
@@RevStoration should be their, I did the same swap to my 64 Galaxie 500 everything works as it should and the gen light does go out, your going to see a big difference from the gen
@JoKeR-qu3ut
@JoKeR-qu3ut 3 жыл бұрын
@@RevStoration Is there a black rubber plug on the backside? Your terminals should be under it.
@mickeyj4228
@mickeyj4228 3 жыл бұрын
Great job! I'm also a Puddin Fab Shop fan!
@M_Phipps0520
@M_Phipps0520 3 жыл бұрын
I lol‘Ed when he said this isn’t Puddins fab shop!
@RevStoration
@RevStoration 3 жыл бұрын
Gotta love Puddin
@peterlaredo293
@peterlaredo293 3 жыл бұрын
Great stuff Rev I love what ya's do there been watching your videos for awhile now, I'm a car fella myself its a great feeling when you get and old car running that hasn't ran in years, My dad passed away in 2001 he wanted me to keep his pride and joy a 1968 ZB Fairlane I still have it today, between dad and I we have had it 37 years now, I also have a 1971 XY falcon I bought to restore, living there with all those cars ya's have there would would be spot on love it :-)
@RevStoration
@RevStoration 3 жыл бұрын
Peter, I am truly honored that you watching... God Bless
@kenworcester4387
@kenworcester4387 3 жыл бұрын
Hey Brother Dave and Nikki-T!
@RevStoration
@RevStoration 3 жыл бұрын
Hello Brother Ken... Hope all is well..> God Bless!
@nikkitwheeler162
@nikkitwheeler162 3 жыл бұрын
Hey Ken!
@kevinanderson705
@kevinanderson705 3 жыл бұрын
Love the Nutcase Rev!!! She's in my prayers Sir!
@RevStoration
@RevStoration 3 жыл бұрын
Thanks
@raymondsprengelmeyer1278
@raymondsprengelmeyer1278 3 жыл бұрын
Great job Rev!
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Raymond
@JJDFN
@JJDFN 3 жыл бұрын
Excellent job Rev !!! I had no idea you could weld !!! Nothing makes a man happier than beating metal into submission with a very large hammer ! I can't wait to see what's next for the Falcon.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks again for watching... God Bless.
@murvisstribling4035
@murvisstribling4035 3 жыл бұрын
Keep on trucking my brother you will get it BLESSING to you and your family
@RevStoration
@RevStoration 3 жыл бұрын
Thanks for watching... Ill keep working..
@TheJohndeere212
@TheJohndeere212 3 жыл бұрын
That Falcon is a very nice car
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Arthur
@supersportrsz28
@supersportrsz28 3 жыл бұрын
I really enjoy the content. Thanks for the family fun content plus educational information for these beautiful old classics. Thanks for sharing and keep up the great work. Oh and I can't wait to remind my wife that I always dance with the girl I came with/married. Love it.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks for watching..
@jeffsnyder2051
@jeffsnyder2051 3 жыл бұрын
Thanks Brother!!!!!!!!!!!!!!!!!!!!
@RevStoration
@RevStoration 3 жыл бұрын
Thank you.
@B1Springfield
@B1Springfield 3 жыл бұрын
The thing I like about the generator cars is how easy it is to do the 3G alternator swap. The 63 wagon was missing its generator and I converted it to get it started the first time. Love project nutcase!
@RevStoration
@RevStoration 3 жыл бұрын
Not a bad idea..
@scottbrady5127
@scottbrady5127 3 жыл бұрын
That car is such a good runner. I am happy you got a good one.
@RevStoration
@RevStoration 3 жыл бұрын
Me too Scott
@dirtfloormotors
@dirtfloormotors 3 жыл бұрын
So glad you didn't burn up the ignition, that is a good original looking car.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks... me too
@timhanson2080
@timhanson2080 3 жыл бұрын
Great job Rev. Always a pleasure to see your videos.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Tim.
@rolandogonzalezmolina9721
@rolandogonzalezmolina9721 3 жыл бұрын
God bless you Rev. Nutcase looking good 👍🏼.
@RevStoration
@RevStoration 3 жыл бұрын
Thank you kindly
@TcTeXaS1
@TcTeXaS1 3 жыл бұрын
Put a Napa 1 wire on my 70 f250 and I’m not ashamed of my decision, simplicity is everything on these old things 👍🏻
@RevStoration
@RevStoration 3 жыл бұрын
Amen..
@allenbeaulieu7077
@allenbeaulieu7077 3 жыл бұрын
Nice job Rev. You made a good bracket to mount the alternator. The Fabricator!! New title Rev! Hope you figure out the gen light. Hello to NikkiT, the Ole Man and JC. Great to see you all. Big Al.
@RevStoration
@RevStoration 3 жыл бұрын
BigAl, I had to purchase an exciter wire, but it will be working soon.
@dopeynightlifetv6859
@dopeynightlifetv6859 3 жыл бұрын
Great job on the welds Rev!!
@RevStoration
@RevStoration 3 жыл бұрын
Thanks
@67Stang
@67Stang 3 жыл бұрын
I did that switch on my 67 Mustang. It was great. So much more power is available than the old three wire system.
@RevStoration
@RevStoration 3 жыл бұрын
Does you alt dummy light work?
@67Stang
@67Stang 3 жыл бұрын
@@RevStoration I actually had an amp gauge. I replaced it with a modified one from Rocketman's Classic Cougar Innovation - www.rccinnovations.com/index.php?show=menu-volt-all. He has them for mustangs and cougars.
@hillbillyspeedshopandgarag4564
@hillbillyspeedshopandgarag4564 3 жыл бұрын
2 weeks is too long to wait for a rev video. I didn’t know what to do with myself waiting that long
@RevStoration
@RevStoration 3 жыл бұрын
I understand... God Bless..
@MrMattDat
@MrMattDat 3 жыл бұрын
Love it. Great job. Now, about that door.....
@RevStoration
@RevStoration 3 жыл бұрын
It is a little floppy...
@robertforget6369
@robertforget6369 3 жыл бұрын
good job brother God bless
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Robert
@nathankerry3256
@nathankerry3256 3 жыл бұрын
Can't wait
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Nathan
@jmcahron368
@jmcahron368 3 жыл бұрын
Instead of making a new bracket, did you consider just using the old bracket, and a length of tube between the alternator mounting and the back of the old bracket, then hold it with a long bolt?
@RevStoration
@RevStoration 3 жыл бұрын
I was going to use the old one and had already purchased the spacer but the front of the bracket was too far back and the pulls wouldn't line up. It was fun making a new one.
@jmcahron368
@jmcahron368 3 жыл бұрын
@@RevStoration You gotta have fun! Looking forward to the next project.
@brianhayes7618
@brianhayes7618 3 жыл бұрын
That was a fun video thanks for sharing. I always enjoy both your channels. God bless.
@RevStoration
@RevStoration 3 жыл бұрын
I enjoyed making the content.
@marygarner5249
@marygarner5249 3 жыл бұрын
This is going to be good l can just feel it love you all God BLESS 💟💟💟💟
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Mary
@royaltexnable
@royaltexnable 3 жыл бұрын
Good to see your son on the video. Maybe next time he will assist!!
@RevStoration
@RevStoration 3 жыл бұрын
He gets his hands dirty every now and then...
@howardkoster4026
@howardkoster4026 3 жыл бұрын
I never mastered welding. You have it mastered very well Rev!!! Way to go!!!! Sometimes I feel, it's better to upgrade these classic cars... My opinion though. One out of many folks. As long as it "looks" close to stock....then I'm good to go.
@RevStoration
@RevStoration 3 жыл бұрын
I still have more to go with the welding..
@commiehook6323
@commiehook6323 3 жыл бұрын
Love the 1-wire alts. I have one in my '66 F100, and when the gen in my '63 Fairlane gives me an iota of trouble then it will be getting one as well.
@RevStoration
@RevStoration 3 жыл бұрын
They work nicely.
@alfredamantijr3908
@alfredamantijr3908 3 жыл бұрын
I think you did a good job I think you should have merchandise say hello to nick t and the family in that nut case run good
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Alfred... I need to get on the Merchandise train.. Coming Soon!
@davidlilly2383
@davidlilly2383 2 жыл бұрын
Good luck and God bless you all.
@RevStoration
@RevStoration 2 жыл бұрын
Thanks David
@robertwilliams8010
@robertwilliams8010 3 жыл бұрын
Good job Rev👍. Glad I found your channel 👍🙏
@RevStoration
@RevStoration 3 жыл бұрын
Thanks for coming
@chriscurry236
@chriscurry236 3 жыл бұрын
Rev, yes I am the head of the house, but as you said like my grandmother and grandfather used to say she IS the neck that turn's the head, yeah I have moments of genius too!! Been there done that 👍
@RevStoration
@RevStoration 3 жыл бұрын
Amen
@davidcantrell6237
@davidcantrell6237 3 жыл бұрын
Rev is the head of the household , but NikkiT is the boss !!!!
@RevStoration
@RevStoration 3 жыл бұрын
NO doubt.
@pappapsmotzer554
@pappapsmotzer554 2 жыл бұрын
I'm a old car guy from the 60's. And love those galaxies.
@RevStoration
@RevStoration 2 жыл бұрын
Thanks Pappap
@pappapsmotzer554
@pappapsmotzer554 2 жыл бұрын
You go rev. Doing a fine job
@RevStoration
@RevStoration 2 жыл бұрын
Thanks
@afrayedknott1701
@afrayedknott1701 3 жыл бұрын
It's not the cough that carries you off, its the coffin they carry you off in.
@RevStoration
@RevStoration 3 жыл бұрын
Haha... So true
@TheIronDuke502
@TheIronDuke502 3 жыл бұрын
Hey Rev. I wanted to mention something regarding any welding on your vehicles. At the facility where I retired from, I had surge protectors that had positive & negative clamps that clamped onto the battery terminals to protect the vehicle circuits from stray energy that would seek the point of least resistance - This was especially true with the new computerized vehicles and equipment that I routinely worked on. I used to fabricate and modify brackets much like you did in your video and I those slotted adjuster brackets can be opened up with a set of carbide burr-bits pretty quickly. But they sure do throw a lot of metal shards - So wear your safety glasses and gloves. During the livestream, I was removing the rear wheels from off of a 30 inch Snapper RER with the white handlebars while watching.
@RevStoration
@RevStoration 3 жыл бұрын
I appreciate the heads up... Thanks..
@davideuton5361
@davideuton5361 3 жыл бұрын
light not receiving notice from alternator. Remember thosewires you didn't use?
@RevStoration
@RevStoration 3 жыл бұрын
Yeah.. the one wire has no where to plug them in... I have a solution..
@pappapsmotzer554
@pappapsmotzer554 2 жыл бұрын
Looking good rev.
@RevStoration
@RevStoration 2 жыл бұрын
Thanks 👍
@AndrewHCann
@AndrewHCann 3 жыл бұрын
Excellent video Rev :) also one thing one light or Gauge for one wire get that plug in Regulartor put Regulartor pin Number one to back post threads plus bolt with ignition connector plus washer separated them like hamburger also nut back too and pin number of Regulartor to key ignition ground side plus light on your car ! Then be best check battery volt not engine start then when starting up see difference if lose voltage on low or high idle you have backwards and if get more volt on low or high idles got recharge right! I done lots Generator to Alternator swap plus Regulartor also positive and negative ground setups some are pain others fun ! Also Rev Dave I had do Generator BOSH brand to GM Alternators setup for my late dad Combine and Farm Tractors to plus make home brackets to not easy to in one day take few! Especially supplies got use and make up to fit the also not all vechiles wires setup area same too from factory or used too! Take in steps don't rush yourself too even on because stupid weather too change in matter in few hour's!
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Andrew..
@AndrewHCann
@AndrewHCann 3 жыл бұрын
@@RevStoration welcome
@redlegs3835
@redlegs3835 3 жыл бұрын
The two wires that plug on the top of the alt 1 is your F and 2 is your I the f wire goes to your i port on the starter solonoid and the i on the top is your alt light on the dash hope this helps the reson why you put the f wire on the i port of starter solnoid is when you listen to the radio thats your acc power.
@RevStoration
@RevStoration 3 жыл бұрын
I could only find the one wire... I purchased an exciter wire to make it work.. 24.99
@redlegs3835
@redlegs3835 3 жыл бұрын
You can take the F wire jump it to the battery port on the back of the alt.
@redlegs3835
@redlegs3835 3 жыл бұрын
Cheap way to turn it into a one wire done it.
@redlegs3835
@redlegs3835 3 жыл бұрын
You will not need the exciter..
@donnie2533
@donnie2533 3 жыл бұрын
Great video glad you posted keep them coming thanks
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Donald
@torquewisdomgarage
@torquewisdomgarage 3 жыл бұрын
Fabrication in one way or the other is automotive work. I got to my 1964 Ford F250. Got me a new carburetor for the 292. Holley 2300 500 cfm. I got the ignition system all done last night. My goodness this old truck won't know what to do now. So many issues. Nuts not tightened,almost whole driver side spark plug wires came off little to no resistance,6 AC Delco and 2 Champion spark plugs. I have no idea how it was even running. But has all new 8 Autolite Platinum plugs,New Napa Spark Plug wires and nice and tight. Has a new powerful ignition coil and all connected. In about a week I hope I can get the carburetor on and get it running again. My fabrication was getting a vacuum line to carburetor and fabricate a new fuel line. Somehow these lines disappeared. But got it all ready to go.
@RevStoration
@RevStoration 3 жыл бұрын
Awesome. Glad you are making progress!
@gpgoldb
@gpgoldb 3 жыл бұрын
You always tell the kind of jokes I get to tell my mother. She laughs and always says very very cute.
@RevStoration
@RevStoration 3 жыл бұрын
Honored that she likes them... God Bless
@ronwig7665
@ronwig7665 3 жыл бұрын
Great job rev ,
@RevStoration
@RevStoration 3 жыл бұрын
Thanks
@emmetthorath4542
@emmetthorath4542 3 жыл бұрын
Great video. Trial and error. Thats what working on a project is all about. Dosent it always seem that when u think u buy something that says universal and it never fits. Lol. I say as long as its yours and it works its a win. Might not look pretty but it works. God bless and keep up the good work.
@RevStoration
@RevStoration 3 жыл бұрын
I always get it to work and work well first, then we worry about the looks. Thanks for watching!
@tonymartin5104
@tonymartin5104 3 жыл бұрын
Brother I enjoy watching this channel can't wait to see what you have in store for the falcon
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Tony.
@tonymartin5104
@tonymartin5104 3 жыл бұрын
@@RevStoration your very welcome God bless you and your family 🙏
@gocaveman
@gocaveman 3 жыл бұрын
Hi, I also put an alternator on my 64 falcon but did turn it around. It work perfect
@gocaveman
@gocaveman 3 жыл бұрын
Can't wait for your next video. I also can't get the gen light off.
@RevStoration
@RevStoration 3 жыл бұрын
It works but I was afraid it would snap off the housing.. Hopefully, yours stays together!
@sgttombailes3380
@sgttombailes3380 3 жыл бұрын
OUTSTANDING Stuff Bro.. Love It !! And Keep it coming !! I as well as many other new viewers will be also.. I wish You GOD Speed with your new endeavor !! HooAh !!! GOD BLESS !!
@RevStoration
@RevStoration 3 жыл бұрын
Thanks
@TheWidgetz
@TheWidgetz 3 жыл бұрын
Great video as always
@RevStoration
@RevStoration 3 жыл бұрын
Thanks
@kenswitzer4133
@kenswitzer4133 3 жыл бұрын
Hi Dave, to keep my 67 camaro looking original I opened the external regulator and added a soldered in permenant jumper and was able to keep the wiring looking original. If I had a wiring diagram of your regulator I could help you out some. Love you and your family. May God keep blessing y'all .👍✌️🙏🏻👌😁
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Ken... I will figure it out.. it is a part of the journey that I love..
@emilmaki3001
@emilmaki3001 3 жыл бұрын
Rev the boys love the jokes! Keep'em coming! Love the old Fords too!
@landrover109ukpwilkin7
@landrover109ukpwilkin7 3 жыл бұрын
so half a sleep see the rev drawing Carl Fredricksen the old man from the up movie them he turns in to storm trooper and im thinking hes turned to the dark side then i see NUTCASE and i know its going to be a lovely day
@RevStoration
@RevStoration 3 жыл бұрын
Awesome brother.. Sounds like an amazing trip.
@daviddamico4288
@daviddamico4288 3 жыл бұрын
Those welds are good because they look like my welds and they hold nice job rev
@RevStoration
@RevStoration 3 жыл бұрын
They work and that is all that matters.
@daviddamico4288
@daviddamico4288 3 жыл бұрын
@@RevStoration that’s what I say about mine too
@kbobdonahue1966
@kbobdonahue1966 3 жыл бұрын
Love those bad jokes and those old Fords, but I'll bet your Sunday sermons are pretty awesome and buy the way, today is Sunday. God bless you and your family. 🙏🚗✝️ P.S Love the reference to Puddin
@RevStoration
@RevStoration 3 жыл бұрын
Hopefully, you have found the church page... God Bless..
@richardperkins6132
@richardperkins6132 3 жыл бұрын
Rev that's the way to go with that old falcon, with the one wire alternator. I have the same one on my 63.5 falcon futura as well. An it works great. Love the videos. These old Ford's are the best. I was going to send you a link to a video where a guys drug a 63.5 falcon out of an old field It was a little rough but was all there. No motor or tranny but the body was pretty good. Red on red. The only reason I didn't was because I didn't really know your location. An this one was in Kansas. Great video rev. If you don't have the part then make it. It always works out better. 😁👍👍
@RevStoration
@RevStoration 3 жыл бұрын
Richard, it works great and I am grateful that it will work for ever..
@howardkoster4026
@howardkoster4026 3 жыл бұрын
I'm still not used to this engine bay. It's a bit opposite of the '61....Spent a lot of years in that engine bay... Ugly welds??? Does it do the job??? Then it's beautiful! Thing of beauty, lasts forever...
@RevStoration
@RevStoration 3 жыл бұрын
I think they moved the battery to the opposite side because of the A/C compressor.. Ive owned other 60's Falcons and it does seem wrong..
@howardkoster4026
@howardkoster4026 3 жыл бұрын
@@RevStoration that must be the reason Rev....Still, these are cool little cars.....
@howardkoster4026
@howardkoster4026 3 жыл бұрын
yes, they had smooth, clean lines about them.
@stephenspilker9334
@stephenspilker9334 3 жыл бұрын
were fortunate in mpls we have an antique ford part's store called little dearborn.
@RevStoration
@RevStoration 3 жыл бұрын
Awesome to have one so close..
@jamiedeatherage3757
@jamiedeatherage3757 3 жыл бұрын
Love the chanel and the projects, so I thought about it for awhile and got ya a quote "THERES NO NEED 2 FEAR 4 RevStoration IS HERE." I think this fits yall 2 a T. Also 2 make it sound better it could be 2 a NIKKI T. Great work and fabulous automobiles.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Jamie
@robertbusin9983
@robertbusin9983 2 жыл бұрын
Great stuff rev hello from Australia your dad has collected a few cars over the years 😆
@RevStoration
@RevStoration 2 жыл бұрын
Thanks Robert
@dirtykingsgaming
@dirtykingsgaming 3 жыл бұрын
It’s REV TIME LETS HERE THOSE JOKES HAHA
@RevStoration
@RevStoration 3 жыл бұрын
Yes Sir!
@pappapsmotzer554
@pappapsmotzer554 2 жыл бұрын
Nice falcon
@RevStoration
@RevStoration 2 жыл бұрын
Sure is
@unclebo0001
@unclebo0001 3 жыл бұрын
@Rev.Storation I'm not getting notifications and on the bell is set to all ..... anyway brother awesome video thank you for sharing with us
@RevStoration
@RevStoration 3 жыл бұрын
We understand that it happens with channels on KZbin..
@calvindeechacey1247
@calvindeechacey1247 2 жыл бұрын
Car and good job.
@jerryhunley3072
@jerryhunley3072 3 жыл бұрын
Enjoyed another one of your videos Rev! And I too always get the last words, yes dear!!😂🙏👌
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Jerry... this is a fun one..
@davideuton5361
@davideuton5361 3 жыл бұрын
Rev, I thought that body style came out with 170c.i.d. And the 200 came in '74
@RevStoration
@RevStoration 3 жыл бұрын
It did have the 170 but the engine was replaced sometime in its life..
@stanbogdanovecz1300
@stanbogdanovecz1300 3 жыл бұрын
Could you use your original bracket and make a pipe type spacer? Just a thought
@RevStoration
@RevStoration 3 жыл бұрын
The front of the original bracket would put the pulley too far out of line.. I could have altered it to make it work or just make one!
@jut9296
@jut9296 3 жыл бұрын
"it's ugly as sin, but works as good as Jesus 😂😂 Amen. I Like It. Good on ya Rev.
@RevStoration
@RevStoration 3 жыл бұрын
It was true.. it works though.. Thanks for watching..
@jut9296
@jut9296 3 жыл бұрын
@@RevStoration I have no doubt Brother. God Bless. Always a pleasure to watch.
@joebrock9784
@joebrock9784 3 жыл бұрын
Try to call the old man he's a master of fabricator
@RevStoration
@RevStoration 3 жыл бұрын
He would have told me how to do it without a doubt.. I think he approved of my work..
@joebrock9784
@joebrock9784 3 жыл бұрын
At some point if you're going to rewire that and usually one of those universal kids from jags or stomach they're wired for the one where all later from the box and they're labeled every 2 in where all the wires go so it's like a probably two or three day job putting the wiring harness in if you can stay with it through the whole day for someone that works it may take a couple weeks but they're pretty nice kit and they're guaranteed forever
@RevStoration
@RevStoration 3 жыл бұрын
The original harness is still in good shape.. I want to clean it up eventually but hopefully not a full harness.
@chrisdonnacannon4762
@chrisdonnacannon4762 3 жыл бұрын
I am a big fan of the channel keep up the good content
@RevStoration
@RevStoration 3 жыл бұрын
Thanks Donna
@sgttombailes3380
@sgttombailes3380 3 жыл бұрын
My best friend had a 1982 Ford Falcon and we replaced the header exhaust gasket about every 6 months~~. but, we went everywhere in it. Loud or not~~!
@RevStoration
@RevStoration 3 жыл бұрын
Wow... SOunds sorta better
@Tumbleweed_Tx
@Tumbleweed_Tx 3 жыл бұрын
the ignition switch is probably why the car was parked all those years ago, you just got lucky and had it work a few times.
@RevStoration
@RevStoration 3 жыл бұрын
It didn't work because I cut the power wire.. My fault.. new ignition switch installed a month ago..
@RampageReseller
@RampageReseller 3 жыл бұрын
You really got me! I was waiting for the supercharger to get slapped on! What are the overall end plans for the Falcon?
@RevStoration
@RevStoration 3 жыл бұрын
Super Charging.... Thanks for watching..
@Atomshamradio
@Atomshamradio 3 жыл бұрын
Great job rev. I knew you got this dont tell nicki t.
@RevStoration
@RevStoration 3 жыл бұрын
Thanks
@robertjean659
@robertjean659 3 жыл бұрын
I used the original generator bracket and run a long bolt thru the front of the bracket, then alternator, cut a round spacer and pushed the bolt thru it all the way to the back hole, done. Then I just lengthened the top adjusting bracket.
@RevStoration
@RevStoration 3 жыл бұрын
I tried that, but the alternator the belt wouldn't line up.. If I was going to have to alter the bracket, I just made the new one.. It was fun.. well sorta fun.
@oldskool1979
@oldskool1979 3 жыл бұрын
Never seen a mountain dew hat ! cool tee shirt too ! Good Lorrrd ! lol
@RevStoration
@RevStoration 3 жыл бұрын
A gift from Eugene in NY
@LarryDeSilva64
@LarryDeSilva64 3 жыл бұрын
Yes exactly right it is only a piece of cake if you have everything all fabricated and ready to go but of course every application is different. Just like the ignition went out on my "89 F150 I came up with a work around used a relay and a momentary contact switch to mimic the ignition and it is also an anti theft device now because even if you turned the ignition on with the key you can't find the hidden switch to start it. So sometimes we do things that do end up being upgrades. You did great as a fabricator Rev and thanks for sharing. Ugly as sin but Works as good as Jesus was a great line lol
@RevStoration
@RevStoration 3 жыл бұрын
Fabrication is always more work than anticipated.
@michaelkirkwood3316
@michaelkirkwood3316 3 жыл бұрын
How do u bypass the voltage regulator
@RevStoration
@RevStoration 3 жыл бұрын
The alternator has an internal regulator..
@michaelkirkwood3316
@michaelkirkwood3316 3 жыл бұрын
But shouldn't you have to bypass the original that might be why the gen light is on
@paytopray1468
@paytopray1468 Жыл бұрын
Planning on putting one of these in my 60 mercury comet. Any reason you couldn’t use the factory bracket and a long bolt?
@mikeabner0511
@mikeabner0511 3 жыл бұрын
Could you have used the original bracket with a length of all thread rod and 4 nuts to hold it.
@RevStoration
@RevStoration 3 жыл бұрын
It would work but I would have had to turn the alternator on backwards..
@Wooley689
@Wooley689 3 жыл бұрын
Well that is nifty spiffy all right. What welder are you using, I'm looking for one myself for small jobs?
@RevStoration
@RevStoration 3 жыл бұрын
It is a the Harbor Freight Mig Welder.. It works for me.
@Wooley689
@Wooley689 3 жыл бұрын
@@RevStoration Thanks for the info.
@eddiepatterson5025
@eddiepatterson5025 3 жыл бұрын
I noticed the air conditioner bracket is still on do you plan on installing aftermarket Air Conditioning if not why don’t you remove the bracket to clean up the engine bay and have better access to the new alternator. Nice job on the alternator bracket.
@RevStoration
@RevStoration 3 жыл бұрын
I have the original Compressor, I will at least put it back on..
@NathansMoparGarage
@NathansMoparGarage 3 жыл бұрын
Your ugly bracket looks great since it's hidden under the other one. Did you install a fusable link on the power wire from the alternator?
@RevStoration
@RevStoration 3 жыл бұрын
It works good and doesnt have to look good.
@christopherbrown1183
@christopherbrown1183 3 жыл бұрын
Great day bro
@RevStoration
@RevStoration 3 жыл бұрын
Thanks
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Temu Knock Off Holley Double Pumper Review - This One is BAD
32:44
Muscle Car Solutions
Рет қаралды 19 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН