Super easy how to remove harbor breeze ceiling fan dome piece

[@javyjavbaez]

I do sneaker reviews on my other channel Loganjbaez come subscribe link down below kzbin.info

[@lf5163]

Saw the same video you mentioned and tried his way without any success. A year later and abiding by the Coronavirus social distancing recommendation, I have a little time on my hand and was determined to fix it. Your video helped. Thank you so much.

[@ikammel]

You saved the day!!! I broke one before trying to get it done. Very helpful thank you!!

[@mfaulk1566]

1 year later - still helpful video. I have owned my place for over 3 years and every time the light blows it's a whole process. The last time it blew was a week ago. Couldn't get it to open on 3 different occasions - 3 different days until I was like fine - you tube it, again. I saw that same duct tape video - started the whole process was like this doesn't work. Your video came on right afterwards and you said the most important thing - Grasp The Concept - the cylinder piece simply cannot spin. It literally came off just as easily as in your video. Big help for certain.

[@Jattix315]

What kind of bulb does it take?

[@gody20002003]

You don’t even know how much this means to me! Been without light in the bedroom for months!!! Great video and great personality bro

[@thedapilar-pineda6239]

I just followed what you did, Javier and it worked! Thanks, now I can change the bulb on my ceiling fan!

[@ivanpaulino9974]

I think the man on the T rex video is an advertiser of his own product cause it’s all about T rex tape, not about changing or fixing nothing. Thanks a lot bro!

[@dalemichaelswade2956]

THANK YOU! We've been working on this for 25 minutes and getting angrier and angrier ... your video opened the *am* thing!

[@katrinajackson5306]

Omg…I too haven’t changed our bulb in our HB fan because I couldn’t figure out how to get the dome off. Followed the instructions and it came off in 2 seconds. It definitely requires 2 hands. Thanks so much!

[@bobstratton6362]

You are 99% correct. Mine was tight the pipe started to unscrew. needed two more hands to hold the upper assembly.

[@mrapma]

Mine too. I will try that.

[@bobstratton6362]

@@mrapma If the fan has been in place for any length of time, the little grooves get full of junk so it doesn’t operate like brand new. You will need four hands an two ladders.

[@mrapma]

@@bobstratton6362 Thanlks, Bob!

[@emmanueltenkorang3404]

Dude all of a sudden you the smartest guy in the world, you saved me from the trex video thanks so much to you both tho...jeez

[@isladedanica]

Thank you very much! So easy after you explained… and I wasn’t doing all that tape mess, saw that first and then found your video! Thx!

[@Viro69]

didnt work the whole base just keep on spinning how do u get it to lock in place

[@juliairving1094]

I gently placed my head on the middle.of the dome and applied slight pressure while I pushed up and twisted left. It kept spinning and I needed to stabilize it.

[@richardprune1]

Oh my god thank you ! I was going to have a meltdown trying to figure it out and I watched this and did it immediately!!! Thank you !!!

[@Wogu11]

Lol I saw the video you were talking about, and I was thinking there has to be an easier way. That's when I found your video. Appreciate it!

[@PiPiePai314]

Pushing up certainly did the trick. Thanks so much! I also didnt think i would even find a similar model to my ceiling fan with "how do i change the light in my ceiling fan"

[@janetmaldonado3539]

Thank you, I was struggling with it couldn’t figure it out and finally got it open thanks to your video. Now I just need to figure out how to get the light.

[@francoiselandriault8164]

Thank you, I was finally able to change the burnt lightbulbs in my ceiling fan thanks to you.

[@crystaldirk]

Thank you! We watched the other one first and I was like, “no, there’s an easier way”. Our light went out within the first month of moving into our brand new home. Called an electrician, and even when he was here we had to look it up on KZbin. So watching that other video I remembered it wasn’t that complicated, just couldn’t remember what we did, lol. I seriously just started a new playlist called “Home Help” and you’re the first video so that I never have to look for this crap again. Such a shit design though. We didn’t choose the fans, and if we ever replace them (which technically he ordered an exact replacement from the company instead of getting a new bulb), but if WE replace them, I’m definitely going for something else!!! Nothing that simple should be that complicated. I’m low key irritated bc every light in my house is LED flat on my ceiling and the electrician said he gets so many calls to change them out bc they’re so difficult. Same with the fan, my laundry room light went out in the first month too. They immediately lost their appeal to me at that point!

[@VishalRJoshi]

You are a life saver. Never knew it was that easy. Thanks so much!!!

[@dianeyounes80]

Oh my goodness!!! So simple!!! Thank you kindly🤗

[@javyjavbaez]

your welcome glad i could help ✊️🙏

[@tammytucker6712]

Thanks so much, I hope I would've found this before I broke my globe earlier today. But at least now I know what to do to change the bulb. I just got to buy another globe now.

[@texasbunny5471]

Didn't work with mine, but I found out that all I had to do was loosen the three screws in the base that was holding the dome in and voila! It came off easily and I replaced the bulb, but the dome back on and tightened the three screws to keep the dome in place!

[@lapdawg60]

We have the Harbor Breeze "Sail Stream" model (model #40048), which is a bit different, but similar. I've pushed as hard as I can without breaking it, and it WILL NOT COME OUT. Can't find ANYTHING on my particular model, and I need to change the bulb.

[@oldestyoungun13]

What do I do if it won’t lock and the glass globe still doesn’t come off?

[@sherryjohnson-o3f]

OMG I LOVE YOU ❤️ I've been trying to get that dam globe off for 2 days.And I did exactly what you said and it came right off. Thank you so much.

[@Sugarpixie68]

You are a lifesaver\ light saver i was ready to snatch my ceiling fan out of the socket, thanks so much

[@amerkhan2610]

Use a washing up glove to get grip on the dome while holding the actual fan . Came off easy.

[@Jasysshow]

Yes it worked! Think it all just depends on your fan, but this worked for me more than other methods

[@babyboss2012]

THANK YOU!!! Saved me a lifetime of confusion

[@westfield90]

How do you lock it in place so it doesn’t move

[@praveenravichandran4553]

I have the same question. The darn thing keeps moving. Any fix ?

[@vincentkoh3313]

Yup that little push really helped otherwise I will be turning it for hours and yet it will be stuck...

[@jerrylazaro6985]

Thank you for your suggestions! At first it didn't work so I tried banging it with a rubber base of the plier around the edge of the cover with one hand while pushing and turning with the other hand. I think the vibrations loosens it up a bit, so I was able to unscrew it. God bless!

[@millygornail7529]

I just finish watching that same video 😂and then yours came up which I’m very grateful Javier w/the NY Yankees🧢🥳✌🏽

[@angeliquegonzalez8958]

Thank you for your video. I had to push, push, push a few times and then I was able to twist :)

[@briighteyez]

Thanks! I watched the other video. So glad I found yours...super easy!

[@sarahs4922]

Bruh no-push up and turn left does not work, especially if the fan light has been sitting and unopened for years. I saw the same duct tape video and I’m going to have to try it bc this push up and left is NOT working

[@mrapma]

Same here

[@Zeke-bt1iy]

Thank you so much for this video. Iwas going nuts trying to remove the globe......

[@shandraarmstrong2220]

I had just watched they guy you are talking about video with the ducktape right before i watched yours, im having the same issue but as im trying to do it your way i discovered it had two screws thats tuck away which you have to feel around for on each side that holds the globe up(im 5'2)so i didn't have any help & i had to stand on my bar stool to try & reach it.they had the screws kind of tight to twist a lose but i finally got it. Thanks anyway

[@jefferyjones3624]

YO Bro.. You got down.. You helped me out BIG TIME.. I owe you ONE

[@rayrobertsjr]

My fixture has been in place for over 12 yrs. Your steps are correct. However, I am not getting the shade to twist. I am not sure if it settled there after all these yrs. I will keep trying. Any suggestions out there?

[@vinshe123]

Why are these fans so complicated and not easy to replace, at least if you are a first timer with these. I wanted to replace the light bulb inside the dome and had a really tough time loosening the dome and followed these same instructions which looked fairly straightforward to me. But it was not easy, and then i gave up and sat on the bed... Wow and to my surprise fell right on the hard wooden portion of my bed and broke. Just gave me the feeling of been Newton (in a dumb way :) ) ... Does anyone know where exactly i can get a replacement of that part. I tried Amazon, Lowes and Home Depot but this fan is so ancient and stubborn that i couldn't find one. The fan itself works fine so i dont think i need to replace the whole fan itself. Thanks, in adv.

[@BadmaashCo]

My fan and light don't work. Thanks to your idea I was able to get the lid off. The bulb fuse looks good. I wonder could the fan itself gone bad. My fan is more than 10 years old. Any ideas?

[@qstroud]

Hey Jav, how about how to remove the bulb?

[@johnbutler1980]

Tape method worked. Thank god. I turned the whole thing to its end and i am afraid i broke something attached to the rod. Any idea what happens if that rod is turned all the way clockwise?

[@billhathaway2814]

WOW.....Thanks....Best way I have seen so far.

[@ataylor7682]

Thanks but how did you lock the ring so it won’t move

[@tinhorn900]

Did you ever figure it out? Mine is completely loose and I can’t use the fan

[@douglovejoy7818]

Javy, hope mine works as easily. Great video except for the Yankee Hat!

[@lockdown10]

I accendetly pulled the whole dome part down. How you put it back on so I can use the strings

[@RobRobBob]

Thanks Javier, this is awesome!

[@lamar23bham]

😮🤯🤔 glad I watched your video before I went out to get tape

[@mikegranberryii]

what kind of bulb is that?

[@SergiOrtiz]

Whenever I try to spin it, the whole fan moves, anyway to counteract this?

[@antoniorestrepo5706]

That is the normal way to do it when is not stuck. I have done it this normal way about 3 time in 10 years, but then it got stuck and have not been able to do iunscrew it the normal way. So I’m now on tape idea

[@djsnipes364]

What model number is the fan you’re working with? I broke my dome. It fell and broke into a 100 pieces.

[@kellym.6616]

I keep pushing but its nit moving. Then the whole thing keeps spinning when i try to turn. Am i not pushing hard enough?

[@Chad17764]

I used sandpaper and sanded the channel it slides on before reinstall. Seems to slide smoothly now.

[@hsample925]

Good looking I pulled out my tool bag.great bro

[@randysmith7826]

Thank you so much for the video - help me out a lot.

[@dolldr]

Thank-you Thank-you Thank-you!!! Peace.

[@carvinlambert6899]

Thank you chief.

[@GregTVGaming]

This actually worked 💪🏾💪🏾💪🏾

[@gitayanamandra8512]

Thank you!!! Finally able to change my light :)

[@Annie122950]

best video I found on this took two minutes tops

[@Labearski44]

That is the pro tip of the week!!! T-Rex Tape for the win!!!

[@brianhill6593]

Just saved me thank you bro!!

[@uhlengihadebe3512]

Thank you so much, this helped 🤗

[@therlfleminggroup8243]

Maaaaaan lissssssen! Thank you!!

[@TheOneTheyCallRi]

But how do you lock it?.. I have went 3 years.. my patio fan… I get so frustrated every time I try… it horrible. It’s just me..

[@simplycb7494]

I spun mine until the hole thing came out of the ceiling. Wires and all

[@_ASYI]

So how do I lock it into place? Whoever installed it didn't do it right because mine moves

[@docmccoy95]

Thanks Javier.

[@javyjavbaez]

your welcome glad i could help

[@jimkrauza]

Briiliant and easy. Thanks.

[@traviscarpenter5634]

Thank you so much

[@littlecazador]

Thank you so much You made my day

[@vidworld5589]

It works as easy as it shown 👍

[@yayyay7076]

Saved the day bruh man !!

[@gloration972]

Thank you for sharing!

[@flemgooz]

Unfortunately Duc Tape man and myself and millions of others have domes that won't ungrip, no matter which way you push. So this is a video for a completely different topic. How to remove a ceiling fan dome. The other one is for a ceiling fan dome that won't release.

[@phugemawl]

I've watched this twice ... How the heck does he "lock" the fan from spinning ?

[@jamiegoodson950]

Nice thanks for the video got like from me.

[@keithsmith3534]

How do you take the slotted blades out please ?

[@gregmoutonmusicchannel6019]

What size bulb?

[@OGkingplex]

Yeah it’s not working for me I’m literally spinning the bulb getting nowhere and the gentle push up on it isn’t working at all

[@johnnyangel636]

Thanks 😊

[@empressvibes7]

Thanks so much 🙏🏽

[@commander16fexpress53]

You save my day

[@javyjavbaez]

glad i could help ✊🙏

[@nathalielarin8958]

I still can't open the thing :(

[@urielcrooks6431]

Just did it works thanks

[@vidalflores8705]

Thank you! 🙏

[@ScottSlooper]

This is exactly the same fan as we have, but our problem is we can't figure out how to make the fan spin more slowly. There's no pull cord. Does anyone know how we set this fan to a slower speed? It came with the house. I'm hoping this is not a remote control fan and we didn't get a remote for it. The wall switch only turns it off/on, and the speed is fine for summer, but too fast for winter when I reverse it. Thank you!

[@Jattix315]

It does use a remote

[@jeannemm8719]

Wow , thank you so much sir . ❤

[@javyjavbaez]

your welcome ✊️🙏

[@monikagajdosik1977]

Thank you! Simple!

[@timothyhosek3551]

Thanks bud.

[@rainbowrailroadcrossing7798]

What’s the model of it called I have one in my living room

[@jingjingcoming]

thanks

[@TheLisacorwin]

I don't see how he locked it. Mine does not lock and it doesn't push up. The whole fixture goes up.

[@loricochran4447]

Thank you

[@rat-ip4gr]

YOU DA MAN

[@anjie1027]

Thank you so much!