Super easy Multi boot. Setup a Raspberry Pi with almost any device. Pinn Website.

[@ijabbott63]

5:26 SDXC cards (e.g. 64 GB cards) are pre-formatted as exFAT, so _would_ need to be reformatted as FAT32.

[@leepspvideo]

Good tip thanks. 👍🏻

[@lee99bay]

Depends on manufacturers. I bought patriot pendrive 256gb formatted with fat32. So not always a case.

[@ijabbott63]

@@lee99bay Those aren't SD cards. :-)

[@infotruther]

@@ijabbott63 your right

[@infotruther]

@@ijabbott63 what a joke this guy can't tell the difference. Lol

[@christopherlongo3459]

Really cool tried it with almost no issues at all. This saves me alot of time with setup thanks

[@tafkawac]

Another quality upload. Thank you. I'm sure you realise the reason your Pi crashes with two USB3.0 devices is a power issue, most likely because of an overclock.

[@leepspvideo]

I almost always Overclock to 2147 or above. The usb sockets on a Pi 4 have a power limitation.

[@MiniRockerz4ever]

Yeah it is power, so USB hub with it's own power supply is the way to connect more hungry things. Does this mean we don't need to keep SD card in at all? If I remember PINN was always on SD card, or was it Berryboot...

[@leepspvideo]

@@MiniRockerz4ever Pinn doesn’t need an sd card How to setup Pinn OS on Raspberry Pi 400. SSD Installation. kzbin.info/www/bejne/r5bMXoNjqc2Zbas Berryboot does BerryBoot Raspberry Pi 400. Multi OS launcher. kzbin.info/www/bejne/eJzPZ2p6n7OchM0

[@videogamer3999]

I've learned a lot from your video, thanks for another upload.

[@daytrader66]

How does one hide the partitions for the other operating systems from showing?

[@PhG1961]

Excellent video, very well explained!

[@maximo9480]

You can install pinn-lite on an empty SSD or NVMe using the Raspberry PI imager. Choose the pinn-lite ZIP file (Choose OS) and write to the SSD or NVMe drive. When complete boot the PI from the SSD or NVMe.

[@none941]

Thank you! I've been looking for an alternative to Berry Boot.

[@RBIBIANO]

If I don't have a keyboard connected. Is it possible to configure a gpio pin shift button to access the boot?

[@leepspvideo]

I have never tried

[@nandakishor287]

Love from India

[@mamalujo2003]

@leepspvideo The install error for Arch may be because it is intended for RPi3. That's what the file description says.

[@leepspvideo]

Yes, I saw that while editing. 👍🏻

[@jobearesto9746]

Thanks for the video. I bought myself a pi 400 for xmass not sure what I am going to do with it. planning on using it just for phython and ligth retro gaming i think. I think i may try that,

[@obvious_giraffe8386]

I just uploaded a video about my pi 400 setup with scrcpy and an android phone. Please dont copyright strike me , leepspvideo :D

[@Tc84-i]

PiMiga all the way! The 400 is perfect for that

[@jobearesto9746]

@@Tc84-i sounds like a plan. Worth trying out on a spare SD card

[@Colin_Ames]

Thanks for a very clear explanation. I really must treat myself to a Pi4!

[@leepspvideo]

If you do get one this video will come in handy. New to Raspberry Pi, Hints and tips for a better experience. kzbin.info/www/bejne/Y4XUdWesnpylq5Y

[@Colin_Ames]

@@leepspvideo I watched this twice, and found it to be very educational. I am torn between a Pi400, which is affordable but lacks the headphone jack and other connections, and a regular Pi4 which is way more expensive (if you can find one), but has the full complement of ports available. I am leaning towards the 400.

[@leepspvideo]

@@Colin_Ames This may help Pi News 46. Pi 400 headphone jack, Pi’s in SPACE! kzbin.info/www/bejne/kGHdYopmjc6ij7s

[@LizzyTheLizard]

now that is epic

[@kekkokan9273]

Really cool, needed something like that, very usefull and tricky, thanks a lot

[@lee99bay]

Hi. Maybe this is simply if you like to have clean installation. How to create pinn drive simple as you can if you have few microsd cards and want to copy all to one?. Maybe where is solution for this too?

[@gordonshumway8252]

It could be nice if It allows you yo add other systems like pop os or your own IMG files like a customized retropie or even a customized twister OS. This app is limited to do that? or maybe berryboot allows you yo do this.

[@leepspvideo]

You can with Berryboot Backing up an OS Image and convert to Berryboot. Ubuntu Mate download Links. Raspberry Pi 4. kzbin.info/www/bejne/q4TKiqKod9GnopI

[@JayVBear45]

I'm assuming you could have one of the distros be RetroPi.

[@leepspvideo]

Yes, amongst others see 2:27 It’s also easy to download roms on one system, then transfer them to the Retropie partition

[@Mister-Gee-9999]

Lee I'd still like to multiboot a few Android(Lineage) versions sayd 11,12, RaspiOS 32 and 64, , Windows11, Twsiter and a few other OS. Maybe you could look at that.

[@leepspvideo]

Windows hasn’t been added to Pinn or Berryboot. It’s the only one that’s uefi boot. Most of the rest you mentioned are already on Pinn.

[@namangupta86]

Can we install a custom retropie image(from arcadepunks) with twister Os in dual boot from this website?

[@leepspvideo]

An image needs to be converted for Pinn. I have never managed it. Berryboot would work BerryConverter. Convert images for Berryboot. Raspberry Pi 4. Multi OS Launcher. kzbin.info/www/bejne/pJ7VgIyGhp1-pas Although I tend to keep custom Retropie images on their own storage

[@Daviletemas]

Great video. I got it. Only I've a question. How could I rise up resolution? Maximum I've get in full HD 1920x1080 . Thanks

[@leepspvideo]

I wouldn’t run an os beyond 1080 on a Pi. performance is very poor at higher resolutions.Each operating system will have its own resolution settings.

[@Lp-ze1tg]

Just wondering if you have ever tried testing a raspberry pi pair with a 7.5 inch (or over) epaper/e-ink display?

[@leepspvideo]

I haven’t

[@sospyro]

can i transfer an already installed O.S. from a microsd/USB device to another where i installed pinn? or at least install the O.S.es and then cloning the original partitions over pinn's?

[@leepspvideo]

I haven’t managed to create a Pinn compatible image. I have with Berryboot BerryConverter. Convert images for Berryboot. Raspberry Pi 4. Multi OS Launcher. kzbin.info/www/bejne/pJ7VgIyGhp1-pas

[@adampattison1064]

Thermal paste vs thermal pad!

[@leepspvideo]

Yes, coming soon. I made the wrong video public. 😳

[@adampattison1064]

@@leepspvideo look forward to it.

[@tony6261]

Is it possible to dual boot Windows 10 and Twister on an SSD ? Similar to Boot Camp for a Mac, you would need 2 partitions formatted differently.

[@leepspvideo]

I don’t think anyone has managed it because of the uefi boot Windows on Pi uses

[@tony6261]

@@leepspvideo Thank you!

[@thelastengineer8633]

saldy no home assistant is there other ways to do that? because i would like to use the pi with homeassistant and if i want use the pi for other things

[@leepspvideo]

The simplest way is to just get another sd card

[@thelastengineer8633]

ok thx@@leepspvideo

[@xris2394]

Your video is very interesting, i would like to know if it is possible to make the same thing with recalbox 8.1.1 and lineage android 20 because they are not in the list, thank you ? My apologize for my english, i'am french.

[@leepspvideo]

I have tried in the past to create Pinn images and failed.

[@garyporter8323]

I keep getting error message about partitions not able to satisfy. Only installed 4 items on a 500GB SSD.

[@leepspvideo]

I haven’t had that, could be the drive or usb sata cable

[@spuds7677]

I tried to get this setup with RaspOS, TwisterOS and RetroPi and I get all errors as soon as I hit install. It gets a download error. It's not my network, I can browse the internet and such with in the Pinn install OS. Not sure what is up. I will try again in a day or two.

[@leepspvideo]

Try the original method How to setup Pinn OS on Raspberry Pi 400. SSD Installation. kzbin.info/www/bejne/r5bMXoNjqc2Zbas Pinn OS Gets Android 10. USB Multiboot Lineage OS Raspberry Pi 4. kzbin.info/www/bejne/an7InH-tisiIbdE

[@terrydaktyllus1320]

I was going to try using Pinn to dual boot Linux and Windows on a Pi. But in the end I just installed Linux and whenever I had a mind to boot Windows on it, I just smashed myself in the face with a mallet three times to exactly the same effect.

[@leepspvideo]

I’m glad to hear you are coming around to the idea of running Windows. I always thought you would. 🤣

[@praveenagarwal8159]

After clicking the exit button in recovery menu, my Pinn does not show me the other OS options screen at all and starts booting default OS automatically. Please help.

[@leepspvideo]

This is the other method of setting up Pinn How to setup Pinn OS on Raspberry Pi 400. SSD Installation. kzbin.info/www/bejne/r5bMXoNjqc2Zbas

[@michaelgkellygreen]

Great video. i wonder could i install android on my pi 4 and then install Citra? For educational purposes only ;)

[@leepspvideo]

I haven’t tried Citra.

[@obvious_giraffe8386]

@@leepspvideo hi! Please take a look at my setup with scrcpy. Just uploaded it.Hope to see your take on it soon

[@KingJesusTheFirst]

Is and SDcard needed for berryboot towork or does it just work off any usb device?

[@leepspvideo]

Berryboot still needs an sd card for the initial boot menu

[@KingJesusTheFirst]

@leepspvideo apparently not. Mine works just with a usb to sata 3 ssd O.o Also mine didn't install kali when I made room for the partition thiugh it did in fact install everything else 😅 it doesn't seem to have a download repository for the img it needs for kali??

[@vincentnunna510]

I got two bootable USB Key with already two OS installed (TwisterOS / LineageOS Android). But i don't want to format my two keys... Can Pinn manage those two USB Drives? It looks like you must flash/install new OS from Pinn

[@leepspvideo]

You need to start fresh with Pinn, it can’t be added to an existing os as far as I’m aware

[@vincentnunna510]

@@leepspvideo unfortunally 😔

[@tonywalsh9406]

Thank you for all the videos, I enjoy your presentation. After using Pinn OS and installing Raspberry PI4 64 bit OS and Twister, I have the problem of no audio output in either system. I ran across this using BerryBoot and corrected the issue by adding hdmi_drive=2 to the config.txt in BerryBoot. However, this does not appear to work for Pinn OS. For me it seems to be a common theme, every time I try something new on the PI ,audio disappears. I am running a PI 4 8gb and greatly appreciate any help provided.

[@leepspvideo]

I remembered this fix mentioned in the comments of my 64bit Retropie video. Might be worth a try. Eugene Wyatt 2 months ago (edited) the 'easy fix' for HDMI audio: in /boot/config.txt replace: dtoverlay=vc4-kms-v3d with: dtoverlay=vc4-fkms-v3d Show less 2 REPLY Hide reply Liam Lawlliet Liam Lawlliet 1 month ago For anyone curious about how to do this use these commands in terminal: sudo nano /boot/config.txt This opens a text editor, now look for dtoverlay=vc4-kms-v3d and add the f before the kms) hit ctrl+x hit y hit enter sudo reboot

[@tonywalsh9406]

Thanks very much, I will certainly try your suggestions. For future reference, I was able to get audio going by editing the config.txt file in the boot menu (added hdmi_drive=2) similar to how you corrected the boot issue in your video. Now I need to figure out the RPI OS audio issue. On a different note, quite looking forward to more of your 3D printing videos.

[@Thomasz-Tech-Innovations]

Will WOR ever be a supported multiboot?

[@leepspvideo]

Possibly

[@GrandPlatClips]

The only Ubuntu option available is already outdated it would of been better to put Ubuntu 20.04 LTS

[@ikif81]

How I run multiboot without monitor , only through SSH ?

[@leepspvideo]

I have never tried

[@kalebmiles3606]

We have almost the exact pi set up lol

[@cutflow2]

Can you make a video on installing Linux or pi on iPad

[@leepspvideo]

It’s not possible without a jailbreak as Apple don’t allow it. UTM is impressive on iPad. I have used it on my MacBook. Ubuntu 21.10 Running great on M1 Macbook. UTM Virtual Machine. kzbin.info/www/bejne/p53GiISKo72GgZI These are good alternatives For usb c iPads Linux on iPad without a network. Raspberry Pi Zero 2W or Pi4. VNC Direct. kzbin.info/www/bejne/nl7HmWWCaL1lmNU For lightning iPads PiPad Pro, Raspberry Pi 4 Remote Desktop with iPad kzbin.info/www/bejne/oIPManWgq6meoac

[@johnr8676]

Is Multi boot a viable option to get both RetroPie and RasPlex running on my Pi?

[@leepspvideo]

Yes

[@johnr8676]

@@leepspvideo is it swings and roundabouts when considering PINN or Berry Boot?

[@leepspvideo]

Yes, both are great.

[@madskristensen3508]

Can I add a OS to PINN-OS, without wipe the other OS’es?

[@leepspvideo]

I couldn’t find a way. Berryboot can.

[@madskristensen3508]

@@leepspvideo ok thanks

[@kge420]

Can I install an OS that's not listed?

[@leepspvideo]

I haven’t with Pinn. It’s easy with Berryboot kzbin.info/www/bejne/pJ7VgIyGhp1-pas

[@atouraya7779]

what if I have a 200GB sd card? Do I put 200000MB in the field?

[@leepspvideo]

I”m not sure, you could always use the standard method PINN Easy OS installer. Raspberry Pi 4. Enhanced version of Noobs. 64bit Gentoo Linux. kzbin.info/www/bejne/eWS8g6eeatp3pKs

[@garyporter8323]

Tried doing this and my pie4 just goes into net booting to install pi imager.

[@leepspvideo]

Try the standard way. Have you enabled network boot in Raspi-config? www.raspberrypi.com/documentation/computers/configuration.html

[@kittyflin40]

Why won't it automatically boot the top operating system, always have to select boot😢

[@leepspvideo]

I haven’t tried it for a long time. I may have tried in this video PINN Easy OS installer. Raspberry Pi 4. Enhanced version of Noobs. 64bit Gentoo Linux. kzbin.info/www/bejne/eWS8g6eeatp3pKs

[@johnsargeant4797]

waiting for pi 5

[@MiniRockerz4ever]

Watching again, because forgot to bookmark

[@johnu730]

BerryBoot is superior because you can add new OS' after initial install.

[@qzore9768]

First?

[@KayKay-sr7fs]

Your options does not worked. Take more than 24 hours for download 3 OS and got error log just like in the video and does not boot at all.. wasted my hours !!!!

[@leepspvideo]

It was working a year ago when I made the video. Try the traditional method How to setup Pinn OS on Raspberry Pi 400. SSD Installation. kzbin.info/www/bejne/r5bMXoNjqc2Zbas Or Berryboot BerryBoot Raspberry Pi 400. Multi OS launcher. kzbin.info/www/bejne/eJzPZ2p6n7OchM0 You can convert your own operating systems with Berryboot BerryConverter. Convert images for Berryboot. Raspberry Pi 4. Multi OS Launcher. kzbin.info/www/bejne/pJ7VgIyGhp1-pas