Super Speed Saturday - Arrma Vendetta 4s Speed Test!

Super Speed Saturday - Arrma Vendetta 4s Speed Test!
Super Speed Saturday - Arrma Vendetta! The world's FASTEST and BEST RC deal right now!
YES! These RC Sale PRICES are real!
Order from Horizon
Car
4s ESC
bit.ly/3lIS61Y
Order from Amain
Car
4s ESC
bit.ly/3rFFP0X
Help Support my Channel and Work
Donate to JayTee RC KZbin Channel
www.paypal.me/...
👕 Link to buy t-shirts
teespring.com/...
📚 Link to buy my books
www.amazon.com/...
🎶🎶 Music Provided by NoCopyRightSounds
Watch "Syn Cole - Feel Good [NCS Release]" on KZbin
• Syn Cole - Feel Good |...

[@jeffdavis6715]

I put a 29t pinion and i get 86 mph on 3s. Could be faster but i need a longer test site.

[@georgetek]

This motor is stout. Add a couple turbo fans. I swapped out the esc fan too. 30mm on the motor x2 and 25mm in the esc. Tip: the front end dips hard while braking. You can hear the body scraping and the tires will rub the inside. Need to stiffen the springs up but also lower the ride height about 6mm to keep it from catching air.

[@bkfracing8025]

Hey check the mega infraction I put 6s and only ran it on 6s out the box I chad everything and the center driveshaft is metal carbon fiber front splitter side skirts and rear dams thanks guys great video jay tee

[@rastayouth12]

This is an awesome machine I have one prior to this sale and made my own advancements to it. 100 mph is very attainable and the performance of this vehicle is unmatched in my opinion, true Arrma must have a new release or something this year.

[@MK12DUDE]

Did you use 120a esc or 150a esc?

[@1521joe]

well, did you use 130a or 150a ?? after all you made your own "Advancements"

[@1521joe]

@@MK12DUDE he didnt do sh$t, he aint got no rc

[@MK12DUDE]

@@1521joe ?

[@flyingant2557]

I’m not sure if my eyes are fooling me, but the video makes it look like the road is at a slight up angle coming back at you. If it is then the speed is hampered a bit by that incline. Probably faster than the 83 mph on a straight and level?

[@Willrccars]

Crazy thing is I have a similar setup but I used the esc out of the Losi Grave Digger because it’s 4s and 130amp and jennyrc sells them for $87.

[@chuckbareika5478]

I pulled a 130a out of a Losi baja rey and still haven't broken 70 mph on 3s 50c 5000

[@1521joe]

​@@chuckbareika5478 run it 4s, you'll crack 70mph easy, and the motor will be just fine. No heat issues

[@travallen5481]

It should be faster. You are running uphill. I have one. I'm also going to get a Losi Dragster truck. They are long out of stock, but I'll get my order in before the 31st!

[@rudymartin3558]

He's running stock gearing bro...and he needs more room to get more top speed 83mph is about right

[@georgetek]

He’s running the 20T pinion still. I hit 88mph with the 26T.

[@Rcprescription]

Just picked one of these up at my local hobby store for 199.99….now that I’m out of the running on the AK-917 I may focus a little on this guy!…. Glad I found your channel!… I’ll see if I can keep up…😂😂

[@shoshoneedwards1349]

I was right 80! No doubt, what I win😏💪🏾💯🤣🤣🤣. I ran my big rock on 4s for over a yr w/ no problems... Go so bored I put this same stock 3s motor on 6s & put it in my mega infraction/vendetta build😏😎. That motor is incredible 💯💪🏾... Do ask my about 8s... 🤫🤦🏾🤷🏾‍♂️

[@morganyates6598]

84 without speed pinion and stock 3900kv spectrum

[@wasa7]

Horizon doesn’t discount in the Uk so I have one on back order from Amain.

[@MitchellBolognaniRC]

Fun times for sure, I'll be using mine for street racing more then speed runs any recommendations

[@randyprater5773]

Just got a vendetta and threw a new 6s Infraction V2 esc and the high speed pinion and I am topped out at 75 mph on 6s 100c battery 😑 full throttle all day

[@bwilRC]

Wow that thing is movint....feel like you let up a bit early but damn 82 stock! Cant beat it h I run everything on 4s, but smart about it as you putting it.

[@willyjameson]

Good run. I have actually gotten off rounded grubs but it's easier to just pull them off with a pinion gear puller.

[@seanwilliams3390]

Maybe u can help me bro. I put a 6s in mine I did a few passes. Some reason it's not connecting to my controller

[@gillian9178]

Arrma must be due some new releases pretty soon hopefully, what with selling cars like the Vendetta off at rock bottom prices.

[@ninthislandrc]

I also took advantage of the deal. Like many, I'm certain they're about to release an updated version, with Spektrum SMART electronics...and, in all honesty, I could care less, as I don't really like anything 'Spektrum'. First, the servo will be replaced (probably with AFGRC, PowerHD, or ProTek)...then, a few months down the line, out goes the Spektrum ESC & motor, and in goes Castle. As for my "plans", I'm thinking of setting mine up as a speedrun/basher dual-purpose vehicle. Don't yet know if the idea running through my head is actually a realistic possibility...but, the 'idea' is to have two separate spools - one with a lower-tooth spur for speedruns, the other with a higher-tooth spur for bashing - and swap them (plus adjust the spur/pinion mesh) as needed. 🤙🏼

[@MK12DUDE]

Do you think spool will work with bashing? I thought slipper supposed to protect the drivetrain?

[@ninthislandrc]

@@MK12DUDE That's what I meant. Sometimes, when speaking/typing, I use the two interchangeably, even though I know they're different. But, yes, "spool" for speedrun, and "slipper" for bashing. But, I probably won't even start working on it until late August, at the earliest. Right now, I'm busy working on a couple of Rlaarlo AK-917s.

[@MK12DUDE]

@@ninthislandrc nice that is a cool build. Do you know if running spool on bashing will be bad for motor? I want to get steel gears for my vendetta but I’m not sure if I should go spool or keep the slipper

[@ninthislandrc]

@@MK12DUDE I already corrected what I meant the first time you commented. For bashing, I meant "slipper".

[@MK12DUDE]

@@ninthislandrc oh ok, so I’ve been bashing vendetta stock. Should I keep the slipper with metal gear then? I should not make it spool. Just trying to make it reliable

[@techntricks1194]

Nice video, I also ordered mine but it is still in processing, how much days does it took for you to reach the order

[@bucksrcs1583]

Nice video man that's fast

[@jacobsparks4419]

Nice that is impressive, I’ve got mine ordered from amain on back order after horizon failed to get me the one I ordered from them

[@r5x904]

20t or 26t ??? and what do you think the tires??

[@alankowalski8781]

JayTee, does that thing drift at all?

[@nevrxhale9660]

Ordered mine from Amain last week. Back ordered...still hasn't shipped😢

[@JayTeeRC]

dang...

[@peteyfpv2217]

I ordered a vendetta on the 12th from tower hobby and still says processing and can't get anyone from tower hobby to respond to my emails anyone else have this issue?

[@ninthislandrc]

Call Horizon Hobby. You probably won't reach a "live person"...but, the system will give you the option for a callback. The system says a callback will come within 48 hours...mine came in less than 3 hours.

[@Tinkersrc]

I’m bashing on 6s with a twenty tooth pinion and the stock 3900 kv motor no heat issues imo your good all day on 4s

[@MK12DUDE]

Did you keep slipper clutch or went spool?

[@donniewiggs8749]

Can i run it on 4s without it

[@jeffdavis6715]

Without what?

[@jeffdavis6715]

Stock ESC is only up to 3s

[@RON4RC]

Can't wait bro ❤

[@robertredzich7292]

I like your intro.

[@rcmikeman_5858]

I said 83 lol

[@TeeTahhTee]

Great content.

[@electricnitrorc]

Like a rocket 🚀 wonder if there would be anything left if it crashes with these speeds 🤔 probably just have to buy a new one or spend double on repairing 😂

[@Roodah1015]

What ESC you drop in? Thanks

[@JayTeeRC]

see description

[@MK12DUDE]

@@JayTeeRC why didn’t you go with 150a spektrum one? Only 120a? I saw earl used 150a for 100mph+. Which one would you recommend for 4s?

[@1521joe]

JTEE SAID IT!!! DANG MY MOTOR IS TOAST!!

[@JayTeeRC]

Oh man you kept running it on it?

[@1521joe]

@@JayTeeRC I couldn't help it, was having to much fun, .....but.....I got the tp 4040, and the mmx8s going in it. Salute brutha. Oh, nearly forgot, I just got another vendetta today, in green...