great video...but. On all hardware, the lock washer goes on first, then the flat washer. the flat washer should always go against the surface. The lock washer works a a spring force between the flat washer and bolt head or nut.
@brianbourdages966 Жыл бұрын
Terrific video! Followed your step by step instructions for a Black Ops 4500 winch on a 2019 XP 4 1000 Turbo. Installing the bolts on the mounting plate and winch took some patients, but I knew what to anticipate as you described during your installation comments. I ordered the mounting plate for my model and everything worked perfect including the rocker switch in the factory slot.
@SuperATVMedia Жыл бұрын
Glad we could help! Thanks for the feedback!
@06apex252 жыл бұрын
Great Video, helped a lot. Installed mine on a 2019 XP 1000 Dynamix, was basically the same install, just had to go around a lot more wiring with my Command Ride. Also did not mess with the front diff line or brake line, easily worked around it.
@dderossett3 жыл бұрын
This would be great it you would show how to change the atv switch to a sxs momentary 7pin switch.......
@TheStp773 жыл бұрын
Loved the video, helped a lot. Only thing is i don’t know about that ground wire hooked up to that little ground post, since tgeres ample wire wouldn’t it be better to run it directly to the battery?
@davidh13145 ай бұрын
Very well done video. Thank you
@SuperATVMedia5 ай бұрын
Thanks so much for the feedback!
@MrTyroneweaver3 жыл бұрын
Will the ultimate 50" trail accept a warn winch from another machine?
@vikkleo3 жыл бұрын
Was wonder why is there no fuse on the red wire close to buss bar
@Cajuncountrybuggies11 ай бұрын
I have a 900s and my solenoid in my kit looks like that. Biggest pain in the a** I've ever seen. 1 of the battery lugs make it impossible to get a screwdriver on the screw head if youre using machine screws and nuts! And to put a screw or bolt in from the underside it better be the right length or you can't get the nut on ! If i hadn't cut my battery cables to length already i would return my kit.
@eddermartinez7806 Жыл бұрын
Excellent video
@SuperATVMedia Жыл бұрын
Thank you for the feedback! Glad we could help!
@CrumbScum Жыл бұрын
How did you install the switch? Won’t fit my factory cutout?
@SuperATVMedia Жыл бұрын
It depends on your exact machine and which style switch you have. Give us a call or send us an email for assistance with install: 855.743.3427 or sales@superatv.com
@CrumbScum Жыл бұрын
@@SuperATVMedia 2023 rzr xp 1000
@bottomryders50024 жыл бұрын
What gauge is the red, black, yellow and blue wire?
@lighthousemediaservices90023 жыл бұрын
why does the plate I got in my 4500 box not look anything like that plate?
@TheStp773 жыл бұрын
You need the vehicle specific mounting kit.
@nyatvtrailhogs69272 жыл бұрын
Good video thanks
@sotchris98887 ай бұрын
I was able to do the install without dropping the tires and shock.
@SuperATVMedia7 ай бұрын
Thanks for watching our Black Ops winch install! Each machine is different and may require you to remove more or less of what is shown in the video. This video is a general install for the winch itself.
@patkennedy73332 жыл бұрын
HEADS UP: ROCKER SWITCH PROVIDED WITH THE KIT DOES NOT FIT OEM ROCKER SWITCH SLOTS FOR RZR XP TURBO MODEL SHOWN IN VIDEO
@jrbasscatcher198 Жыл бұрын
How is this remedied?
@CrumbScum Жыл бұрын
Just ran into this problem kinda a bummer
@patkennedy7333 Жыл бұрын
@@CrumbScum ya man dumb
@patkennedy7333 Жыл бұрын
@@CrumbScum lol here we are the down votes section
@CrumbScum Жыл бұрын
@@patkennedy7333 what do you do to run the switch?
@MufasaRizz3 жыл бұрын
Very good video t.y
@tnmonty5013 жыл бұрын
One extra terminal lug would've been nice for dummies like me