Supercharger + BONE STOCK Junkyard Small Block?!? What's the worst thing that could happen?!?

[@tammytaylor2472]

you made a 2 hour video about putting a blower on a motor thats all it sucks

[@MortskeRepair]

it actually blows!

[@toddsmith4015]

Lol...see what he did there....

[@toddsmith4015]

It was about as entertaining as most action films these days... it had drama... explosions... fire... and overcoming all obstacles... what more do you want....I guess you could have watched the intriguing eclipse

[@stevedeacon1213]

What a delightful person, you must be so proud of such a well crafted and thoughtful comment, if you don't enjoy the content there are plenty of other things to watch on KZbin, I found the video entertaining, and informative and I was having a terriblely shit Monday, luckily for me, Mortske lifted my sour mood, I wonder if you have ever done anything to improve a random persons day?

[@bmxspert]

The video was great period

[@garybrady9531]

Mortske Repair,the only freaking reason Monday's don't suck and Duff sleeping like a dawg what a deal

[@stevedeacon1213]

Mondays would truly suck A2$ if it wasn't for Mortske

[@JeffKopis]

Oh, Mondays still suck, but Mort makes em suck LESS.

[@peniscaughtinzipper]

What content are you putting out? You should get your money back.

[@glennnickerson8325]

Earthquakes, Solar Eclipses and Blower Motors--It has to be a Mortske Monday!😎

[@MortskeRepair]

Trifecta

[@buckeyejim2989]

🗿💨 Woo Hoo✌️👍

[@mintercms]

😂😂😂😂😂

[@Awsom47Merc]

Great Comment ! 👊😎👍

[@robertvance1873]

Duff Ran when he seen the Flames He was like Ah Shit he's gonna do it again 😅

[@alanwbelcher]

He was heading for the fire extinguisher! Safety third.

[@robertvance1873]

@@alanwbelcher Lol 🤣

[@oldguysdoingstuff6216]

Never scare the ⭐

[@1980bwc]

He was lookin back, keepin his eyes on the noise, when he took off, and nearly won a game of Chicken against that wagon bumper. 😂

[@kidd1072]

You and Puddin make my week so enjoyable!!

[@robertvance1873]

The Mortske Minute is so Awesome I think you could do another channel talking about Automobile History you can hear the passion in your voice.

[@MortskeRepair]

Glad you enjoy them!

[@stevedeacon1213]

Agreed totally

[@smokmup6098]

I remember my buddy telling me that whenever his dad would go buy an engine for his jet boat or whatever, if the engine didn't have a starter, he would bring a starter and a battery to do a compression test. Doesn't sound so crazy anymore.

[@MortskeRepair]

Absolutely not

[@SpinandThrowDiscGolf]

I live in Tulsa Oklahoma and I grew up here. This town used to be rich. It was Rich, and industrial, and Christian. Then they crushed the domestic oil market and told everybody that we ran out of oil which is a total load of crap. And now Tulsa is a shot-out hull of its former city, and its main industries are casinos and weed dispensaries. Getty oil was a big employer. As were literally dozens of oklahoma-based oil companies.

[@MortskeRepair]

Man that sucks

[@7chrisjeep]

Can confirm. Although still alot of energy production and support services.

[@ratsrodsgarage461]

Hang in there for nine more months...

[@steveneckard3649]

How very sad. As a young teen ager I lived there in the early 70's. And yes it was a very cool place to be and party and enjoy young person thing's. It was a very nice city. Too bad that happend to it. And then we had a great president that was not able to get re-elected,, a men who wants to bring all of that back to America.

[@cliffordplasd8239]

Thank you for clearing up for me how my piston got a hole in it. It was an STD and not a dropped valve.

[@MortskeRepair]

Glad I could help

[@johncrichton4341]

Hmm.... next time use a rubber?

[@cliffordplasd8239]

@@johncrichton4341 lmao 😂

[@mrromantimothy]

A bad vacuum leak would guarantee a hole

[@cliffordplasd8239]

Truth be told dropped a valve popped the piston n heads I just put my comment up to give everyone a laugh

[@johnnymack8442]

Oh. The whine when you rev it up is awesome!!

[@MortskeRepair]

LoW power steering fluid pump?

[@irvulture8662]

Love sitting here after work on a Friday night, with a glass of whisky and a cola chaser watching Mortske repair. Keep up the entertaining shenanigans... Also love the Mortske minutes.

[@MortskeRepair]

Enjoy!

[@phillipcortel6330]

Mortske! Under the squirters there is check valve that gets stuck. Take the squirter off, with a pick move the valve around till they free up. Put the squirters back on! Away you go! Nice build!

[@MortskeRepair]

Thanks for the tip!

[@johnwolicki7131]

The look in your eyes and face when that thing roared to life was priceless like a Lil kid in a candy store

[@MortskeRepair]

Absolutely

[@keithrushforth4019]

The way Tiffany hears people shouting at their screens is amazing. 😀

[@atrueredneck]

Always something to look forward to on Mondays

[@richardthomas1743]

HEY! Good morning and thumbs UP to you and Duff! I will be back to watch this later. The Eclipse is total in my area so I am going out to get ready for that! Have a great day everybody!

[@user-KrackerJack]

Best KZbin channel, always look forward to Mondays

[@MortskeRepair]

Thank you

[@72chevelle156]

Your "blower surge" is called a "lean hunt" condition. usually associated with injectors because blower injectors are big and need to be dialed back at idle. carbs can be adjusted to eliminate this condition . but some people tune it in cause they think it sounds cool. That's how I understand it.

[@MortskeRepair]

Interesting

[@BreakFixRepeat]

Superchargers dont always make boost at idle so seeing vacuum at idle isnt unheard of, especially on a stock engine/cam. Ive seen a few people comment that the bottom end wont last long on boost, but uts all in the tuning and how often you rev the guts out of it. I ran a stock bottom end(cast piston TBI engine) small block for a couple of years on 10psi of boost with no issue. Daily driven, but not daily beaten.

[@MortskeRepair]

Thanks for the info!

[@alanmoore78]

1:02:10 most awesome shot ever, looking RIGHT IN the exhaust ports, flame breathing SBC things

[@stuartfletcher2378]

That is a good pick to go in any chassis that you decide to put it in , with the proper gears it will do a good turn at the strip . You should be able to do a twelve to fifteen on a good day ?? . Thanks for having us along , take care , Give Duff Dog the shop dog of the month award , God Bless you and yours , Stuart in Ontario ..

[@nick540g]

I know nothing about blowers (other than the concept), but I doubt anything will fail until you start cramming gobs of air and fuel at high rpm -- and I wouldn't want to be standing nearby when it lets go! Mortske Minute is the highlight of each video - history is a lot cooler now than it was 50 years ago in school!

[@grabasandwich]

Total eclipse of the Mort!

[@MortskeRepair]

Bearded blackout

[@nicktriplett1976]

​@@MortskeRepairor bearded and blacked out 😂

[@stevedeacon1213]

@@nicktriplett1976 no Blacked out Mortske since they stopped making the Hamm's Special Light

[@kr8219]

This channel always reminds me of the stuff we'd do with the parts we could find. Fun.

[@Awsom47Merc]

Mortske !!! You Rock Buddy !!! BLOWER BABY !!! Blowers, Earthguakes, Eclipses, Volcanoes Rock The World Mortske ! Duff is worried though ! Cheers 🍺👊😎👍

[@franklinmaurer8383]

I'm completely clueless on installing a supercharger but..... That's AWESOME!!!! So cool. Nicely done.

[@davidanderson2393]

Great Monday morning, you really know your carbs are working well when the flames are rolling out of the valve cover openings. It probably needed that fuel to break down some of the sludge in the crank case any way, bonus!!!!!

[@MortskeRepair]

Thanks 👍

[@davidanderson2393]

@@MortskeRepair That stock long block will probably last long enough to drink some large amounts of fuel and have fun making noise and cruising around. If you decide to really rip on her it will probably be like pulling the pin on a grenade, should be interesting to see what lets go first, only time will tell, have fun with it !!!!!!

[@jamessaddoris8693]

I have been working the gas station service industry in Illinois for 17 years now. Petroleum jelly is most common manufacturer recommended gasket lubricant that I have seen other than marine grease for wet/submerged areas. And the All seal Gasket Maker that I have seen you use before is something that I carry myself for those "hard to seal jobs". You absolutely need the mating surfaces to stay dry and out of fuel/oil for 24 hours dry time for a solid job, its a fantastic product if give the proper cleaning and set time. I love the channel, keep on pumping out the awesome to watch content.

[@MortskeRepair]

Will do

[@garysprandel1817]

That was the Tylenol poisonings in 1982 happening right here in the Chicago area. Seven people died from cyanide laced Tylenol capsules. Nobody was charged but someone was convicted of extortion after sending a letter to Johnson & Johnson and a lot of people figured that person was responsible but due to the random nature of the crime there was insufficient evidence to connect the extortionist to the murders. It did lead to all the tamper resistant packaging

[@HansFormerlyTraffer]

Dr Mortskestine. "It's ALIVE" ....I think that would fit right in my Honda Civic. I'll swing by for the swap.

[@thomastreffrey255]

That was a great mortske minute !!!! And wow they own all those now

[@frankm8533]

Watching this in pieces during work but ill get it done

[@intentsmodz]

When I put a 350 in my s-10 blazer there wasn't enough room for the fan behind the rad, I put them in front and pushed air through. The only time it had issues was in the middle of summer in Georgia & I was in line at a drive-thru. Maybe one time in Atlanta rush hour traffic but I try to stay out of Atlanta. lol

[@nickspicks9579]

Thanks for the video's Mortske. I have this playing in my ear while in the office keeping the garage lights on.

[@MortskeRepair]

Enjoy!

[@keithwendl8328]

90’s Ford pump

[@jobertvangool9961]

Completely blown away this Monday with Mortske! 😂😂 another fine start of the week! 👍🏼👍🏼

[@MortskeRepair]

Glad you enjoyed it!

[@kenwolf1056]

“All these people believe everything I say, just like the government” hahaha😂

[@someoneoranother7517]

still have a nice 38 coupe thats ready for that engine! =) good work...

[@MortskeRepair]

Don’t tempt me with a good time!

[@rickeyhecht1919]

Mortske videos are the next best thing to a pocket on a shirt

[@Oldobsfordsusa94]

34° at 3000 rpm my camaro 400 small block wit my blower was perfect. No overheating and starting.

[@jeffmiller6100]

Quote of the day... Cost a lot money to look this cool. !👌

[@harrywalker968]

@@MortskeRepair heres how to 2nd key way a junk engine pully, lincoln lok it..

[@gregjohnson8188]

Always enjoy the Mortske minute! You have a knack for communicating history in a pithy fashion. Thank you for another fine episode

[@MortskeRepair]

Glad you enjoyed it!

[@andrewschwarz7210]

You've got so many cool rides to put that in! Definitely a fun summer project to play with!

[@underbird]

I love Duff’s concerned look.

[@stucook8622]

Thanks to everyone involved for another great Mortske Monday!🐾🍺

[@MortskeRepair]

Our pleasure Stu!

[@richardsmith-qy6vl]

I love duff he's such a good dog

[@FreedomRock44]

That Y Block was Like the Kiss Alive tour in the 70's!!!!!

[@stevehilligoss4982]

That's funny after I mentioned removing the scoop that's what you did LOL

[@lubblegarage]

Devil comet, 4.8 earthquake in NY , Eclipse on 4/8- traveling through (7 ) cities named Nineveh-- now Electric fan and flexi hoses ? truly troubling times lol

[@patrickmidiri1543]

My favorite day of the week, Mort and Duff Monday. I really enjoyed the tech tip of the day about Holly. No I didn’t know They built cars either very interesting. Enjoyed the blower being put on the 350 sounded really good. Learned a lot today. Watching you setting that up, I’ve never messed around with a blower in my life so great video. Have a great week.

[@MortskeRepair]

Glad you enjoyed it!

[@TheInfamousHotRodFarm]

Hell yeah my brother 🔥 Good start to this Monday

[@MortskeRepair]

Glad to hear it

[@waynekinnunen1297]

AS a rule of thumb, Holleys don't like much more than 6.5 psi. If and when the fuel pressure is higher than that, there's a tendency for fuel to blow past the needle and seat. I've found that if you adjust the fuel pressure regulator so the carb(s) see 6 - 6.5 all is better. Hope this helps

[@MortskeRepair]

Thanks for the tip

[@grantmelcher1830]

Monday Mortske!!!!

[@frankcunningham7115]

A long time ago, we used to weld a tube into the exhaust collector and into the valve covers then run hose to create negative crankcase pressure and get rid of some of the blow by contaminates.

[@MortskeRepair]

Brilliant

[@toddsmith4015]

That motor stand is scary... thought Duff was about to exit stage left......😮

[@godofthunder6137]

To the right even!

[@richardphelan8414]

I have to tell you watching you work on the carbs brought tears to my eyes and yes I was yelling at ya ,I do like the blower whistle , Blower surge is cool , Ok lets put it into something Cool ,The more you Know .

[@MortskeRepair]

Noted

[@bobfortner919]

Still love them flexy hoses. 😂😂😂

[@MortskeRepair]

yuck

[@davidarnette327]

My prediction,I would normally say the top of the piston would break first, but with such low compression and blow by it might run just fine,....a serious smoke show for sure. It will be fun to watch.

[@kimberlywilliams9757]

I always look forward to Mondays for one reason, A new Mortske Repair video! 😁👍

[@brucevos9630]

I'm thinking you may want to change your oil again after running your pumps for so long with your needle and seats stuck open. It was pretty evident that your crankcase was fuel diluted when you had flames coming out of the valve cover. Second thought, blowing the pan off of that thing might be entertaining. Duff and Mojo on a dead run for the door!

[@bennyhelgeson401]

Church key magnet on dash great tip. Fun fact is My Dad always owned early 50s Fords when I was growing up. His reason was where steering column met dash the the U-bolt was channeled and he could drive down road use this channel to take caps off of bottles. Grain Belt beer was bottled in St. Paul and New Ulm is home of Schells.

[@MortskeRepair]

thanks for sharing!

[@offensive164]

Monday morning some Mortske on the you tube, while i change the clutch hub on a Harley-Davidson. Thanks for making the day tolerable Sir Mortske and the Duff dog

[@MortskeRepair]

Glad to help

[@AaronBrevik]

Ah, yes! Mortske Monday..

[@shawn9015]

Seems like your gap in the fan shroud to radiator is reducing your flow tons and makes your push or pull test not work.

[@larryd.214]

Good Monday Mornin' Mr. Mortske!

[@richardnelson657]

Cool stuff. 😁👍

[@Beez4Jesus]

I agree with you on the ‘61 bubble. No other choice really. That would look so cool!❤

[@leftlanedrivers]

Love it! Send it 😂

[@philpatrick4519]

Can’t Like Video Fast Enough…… Thank you Mr mortske

[@pennz69]

Put an 871 on your like button

[@MortskeRepair]

Our pleasure

[@sdnkjohnson]

That blower sound is outstanding. Dream setup, old gasser vide.Bobble top, straight axel, headers, and retro graphics. Keep fire extinguisher handy, want to keep the shop. Great video as usual.

[@THROTTLEPOWER]

☕Another GREAT Mortske vid!!!!!!!! 👍🙂🤜🤛

[@VorlonFrog]

@01:26:30 GREAT SUCCESS, Mortske!!

[@rogercochran7468]

Got to LOVE the couch mechanics that have never worked on a motor . ( and want to call them engines) Story time- I was 18 years old had a 69 Ford Fairlane in 1980 with a 302. My fuel pump goes out in the middle of nowhere late at night before cell phones. I unhooked the lineto the fuel pump ran it to my windshield washer pump then ran a rubber hose to the carb. I'd push the button fill up the carb. Then drive till it sputterd the fill it up again. I made it home then to the parts store the next day. Thanks uncle John for telling me what to do when my fuel pump goes out how many couch mechanics can say they did that

[@MortskeRepair]

thanks for sharing!

[@tonyaxeman4381]

Just makes Me sick thinking You stuck that intake on a basic engine . Not checking the timing chain and gears no h/p cam and not even a double roller chain on the crank and cam. In the end You have bomb waiting to blow up.

[@MortskeRepair]

Guess we will find out!

[@paulriggers1558]

no sense of adventure some folk...

[@tmveronee]

Sounds cool!

[@66mike]

The pin of shame

[@renewed7809]

Honestly that's the point. See how far she lasts.

[@mikepoint4717]

Mortske minute , The Duff cam and your killer content is gold . Cheers 🇨🇦

[@RustBeatersDerelicts]

A long time ago my brother picked up a weekend toy, '66 Corvair monza spyder that was mid engine (401 Buick, manual reverse pattern Torqueflite) that had a 6/71 and twin Carter AFB's. I believe it was set up with a slight underdrive pulley set and it was very streetable using pump premium gas. The weak link in the driveline was the Corvair ring & pinion in the gutted manual transaxle once he figured out a way to put fat sticky tires on the back.

[@MortskeRepair]

Bet that was wild!

[@RustBeatersDerelicts]

@@MortskeRepair Yeah it was spicy, of course a paper thin layer of aluminum being the only thing separating us from the blower drive kept you aware of belt tracking & maintenance, heheh...

[@jimrobin98]

Whose doing this show? It's yours! Do it the way you want! Those of us that watch --enjoy the way you do it! It is informative and entertainment! If they don't like it--don't watch it! Keep doing what you are doing!

[@MortskeRepair]

Thanks, will do!

[@Rski1234]

NASA approved drill depth gauge, We all do it Mortske. Monday and I finally finished My move across town.....Cold ones and some interesting and informative fun. Thank you Sir!

[@MortskeRepair]

Good stuff

[@larrygcrews7971]

That motor would definitely be fun in whatever you decide to drop it in. Cant wait for that video!! Another great video Kevin

[@W1se0ldg33zer]

Find out what size of jets are in the carbs - you don't need bigger ones with two on a blower. If you want to get half-way decent fuel mileage stick smaller jets in it. There is a way to have it run on one carb and get the other to kick in when you put your foot in it. I remember that article in a car magazine long ago. That's the good thing about Holley's - they're easy to play around with to fine tune things to your liking. It's a good idea to always have an extra set of float parts.

[@Greasy_caveman]

Mortske- the small block whisper. Good work man! 🍻

[@MortskeRepair]

Thanks! 👍

[@CarlGransee-sk5gg]

Change gear oil to full synthetic 75/90. It will run cooler adding more hps.

[@LarryBunch-q7j]

When I helped on the Pit Crew of a Limited Super Stock Race Car in the 70s we ran Holey Carbs. Our Engine guy said they were simple and easy to work on and it is a good thing because you were always working on them. I also worked in parts at an IH Dealership and those Pickups and Trucks also ran Hollys. Power Valves could be problematic on some of them also.

[@mattparoz4246]

40:01 Correct Sir Mortikis. Skotch Key is the “technical” term. I remember doing a few of these in my apprenticeship with Queensland Rail (1990-93)🇦🇺🤙🏼

[@parman3232]

Yes I love the blower surge and grew up with it around my dad’s trucking business…the old 2 stroker Detroit’s!

[@kennethsonier1766]

Good morning from Cape Cod ⚓ WOW, this is pretty damn awesome! You need to put that engine in the tri-5 to compete with dimwitted Dan 😂 that's what he goes by these days. I think you're going to blow the bottom end out of that engine. then again it might run great. Hey keep up the great work and the awesome content Mortske 👍✌️🇺🇲

[@nicolasstanley1392]

Another Cape Cod boy here myself

[@egodeathplease]

My best guess on blower surge would be power valves. You've got essentially 2 engines to tune there. The actual engine and what's taking place on top of the screws. I bet a pair of quadrajets would work great for what you have. Small primaries and progressive secondary. You'd have to redo your linkage though.

[@codyjackson3342]

Best part of Monday morning 🎉🎉🎉🎉 I’m excited to see this setup working

[@gabebothers9937]

Love the Mortske minutes, keep up up the great videos

[@MortskeRepair]

Thanks, will do!

[@darrenhawken9766]

Great vid , educational....and too see your happy little face when it fired up 😊 you were glowing.......thanks for sharing 👍💨💨

[@eagleattucson]

Recently bought a cyclops light based on your recommendation. VERY IMPRESSIVE!!! Thank you!

[@MortskeRepair]

Hope you enjoy it!

[@egodeathplease]

It won't make boost until you get a load on it. You might see a pound or 2 on a hard Rev tune? Don't run the blower belt to tight. That can break the crank to. That wide clogged belt can run pretty loose. Little floppy while running should be OK.

[@andrewschwarz7210]

It sounds good so far! Definitely a fun toy!

[@ShaneLewis-n2o]

Great job sir ! Thanks for sharing!

[@MortskeRepair]

Our pleasure

[@100PercentYourNeighbor]

I’m really liking Mortske minute segments. Really cool info.

[@MortskeRepair]

Glad you enjoy them

[@steveneckard3649]

Thank you for a well spent time of enjoyed entertainment! The flame and sound coming out of that engine was very cool! I am sure that you have several good choices for a vehical to put that engine into. I would of taken the time and money in going through the old engine first. Overhaul and related prep work... But that is just me... You should dyno the horsepower once installed in a vehicle.

[@MortskeRepair]

Thanks again!

[@johnd21]

Probably the coolest thing I’ve seen here. Can’t wait to see what you put it in.

[@shilonorman9096]

One key component of Holleys is the power valve. Holleys site has info on what to use on blown motors. Check manifold referenced power valve article. You also need to check the jet sizes.

[@MortskeRepair]

I’ll check it out

[@mikesarracco7939]

Had good time .enjoyed the content I learn something every Monday. Have a great week

[@Bill-xc8le]

Excellent job Mortske!! That thing sounds excellent!! Probably your best video yet!!!

[@MortskeRepair]

Wow, thanks!

[@JHcustoms937]

It's called entertainment for a reason some things people like some people don't I personally like the video It was long but worth watching. Thanks again and keep it up.

[@smokeygasser4037]

I have a couple sbc with 671 Jimmy's on them one of them is a 1975 bone stock original with a lot of blower miles on it 1/3 of them miles are stand on it miles without any issues. Also offset pulley sizes will give the blower surge effects

[@SuperMAZ007]

That was another cool Mortske minute, love these cause where else do you hear about the older automotive history? Bubbletop with the blower would be one option cause it's not going to be a bolt and screw kind of restorable car anyway. Personally I would like to see the bubbletop with a carbureted engine, however it's your call what do to with it. The only thing that could go would be the head gaskets or one of the rods would decide to hit the orbit.

[@RacerRoss]

You helped me with my timing light I haven’t used yet ! I’ve got the dial version, same brand. Thanks 👍🏻🇺🇸

[@MortskeRepair]

Glad I could help

[@terrencebuller7676]

Hello Mort, really enjoy today's program. Look forward to seeing what you do with the blower engine. Take care and stay safe 👍