Superchip XT27A & XT27B :: Tests with Autel KM100 and KeyTool Max

Рет қаралды 30,116

Күн бұрын

Пікірлер: 43

@john-locksmith Жыл бұрын

With Xhorse you can generate same super chip over and over. With Autel you can only generate or clone super chip xt27 chip once. After that you must reset chip in Xhorse then can reuse in Autel.

@dashakvit7968 10 ай бұрын

So Xhourse is considered better ?

@davidturczak7253 9 ай бұрын

@@dashakvit7968maybe both . Lol

@javierpnd3625 5 ай бұрын

Which one is better?

@GentKermit 8 ай бұрын

I have km100 and i think bought kd x2 or vidi mini key tool .Which one will be better in your opinion

@UnixCoDElectronics 8 ай бұрын

Mandatory xhorse device to can work with superchips, also kd’s devices are very good

@aliayad7570 Жыл бұрын

Hello, thank you for these great videos. I have a question that I hope you can answer. Can Autel km 100 program new smart key for Volvo V70, 2015, and add another key, knowing I only have one key and want to add another? Thank you

@UnixCoDElectronics Жыл бұрын

Hello, i have not programmed volvo with KM100, but in menu it is available Volvo V70 ( 2009-2016 ) with semi-smart key. It have both optiona add key or all key lost. Hope it helps

@НеопознанАккаунт Ай бұрын

Здравствуйте, скажите, какая вообще разница между чипами 27а и 27 б?

@Kikkoman5609 7 ай бұрын

Are you able to read a key with the Autel and then Clone it to the Xhorse Superchip XT27A?

@UnixCoDElectronics 7 ай бұрын

It will not work Autel cannot generate xt27a, just can pre-code blank chips

@davidturner6509 Жыл бұрын

The super chips are great but they don’t always work. I generated the Honda “G” chip on several different super chips but they would not program to the car. When you checked them with the key tool max it looked like everything was correct. I then ordered a “G” chip key and it programmed right in. So I cloned the chip key to a super chip just to try it but it still wouldn’t program to the car. The key tool max couldn’t tell the difference between the two, but the car sure could.

@AMGINEC 7 ай бұрын

i cant speak eng. pls tell me simple who is better AUTEL KM100 or Xhorse KeyToolMax - i want buy my first key programmer. im beginer

@fernandovillagra5502 3 ай бұрын

En programación es mejor km 100 (y sirve mucho para generar y programar mandos presencia), para clonar y generar mandos es mejor xhorse.

@bobhutchins557 Жыл бұрын

Where did you get the XT27B chip?

@UnixCoDElectronics Жыл бұрын

Hello, XT27B it is the chip sold by everyone as Xhorse MQB48 and its marked XT1M - But on KeyTool Max is shown as XT27B.

@bobhutchins557 Жыл бұрын

@@UnixCoDElectronics Thanks!

@kimnilsson7501 Жыл бұрын

Thanks (but quite confusing from the vendor)

@ELEVOPR 6 ай бұрын

So Autel can't program and then unprogrammed and reprogram a SuperChip? But the Xhorse Can? Is that correct? Thanks for sharing, good stuff.

@UnixCoDElectronics 6 ай бұрын

Yes it is corect, if you want to work with superchips its mandatory to have an xhorse device for superchips

@ELEVOPR 6 ай бұрын

@@UnixCoDElectronics Do you know if the Newer KM100E 2024 model writes and rewrites to the super chip? Also does it do TPMS like the Xhorse Max Pro Does?

@kimnilsson7501 Жыл бұрын

First I woundered what this video was about! Stupid to put a VVDI chip in a Autel. But as you state, a test/play on Autel. Instead I started to like it more an more. A really good video, thanks! This is really good knowledge. But what about the KD X2 (I just lovet it more and more) in compare? How do you feel about it? Just got a Max Pro two days ago, and still hasn't used it yet. Instead of KM100 we have the IM508, and love it too. But the yrl sub compared to KM100, I don't know if we to keep it updated. Again, thanks for a (first confusing) video, that trned out to be so good. Trying is to learn, bro.

@UnixCoDElectronics Жыл бұрын

Hello, I have also KD X2 but for some reason me personally i use xhorse keys as main keys and also to generate transponders, i keep KD only as backup. Also KD its great but i got used with Xhorse as main tool

@kimnilsson7501 Жыл бұрын

@@UnixCoDElectronics Me too now have a Xhorse (but not used it yet - small shop). Thanks for your reply and the info about MQB48 being a 27B

@javierpnd3625 5 ай бұрын

Cual es mejor ?

@UnixCoDElectronics 5 ай бұрын

In general i chose xhorse for transponders, remote generation, but as obd2 programming km100 its better then key tool max + xhorse mini obd. ( but i use other tools for obd2 programming ). The best tool is the one that fits among your other tools. Eg if you have autel508/608 then km100 is no need

@armandosegura8199 Жыл бұрын

Hi where can we buy this chip in USA? Thanks!!

@UnixCoDElectronics Жыл бұрын

Hello, the chips are available worldwide, just google it, i don’t know the US stores, only from europe.

@danytorke Жыл бұрын

Hola, XT27B donde busco NO hay en stock, solo XT27A

@KluczeWisla 11 ай бұрын

Bo xt27b możesz wygenerować. Mqb

@KluczeWisla 11 ай бұрын

Bo xt27b możesz wygenerować. Mqb

@KluczeWisla 11 ай бұрын

Bo xt27b możesz wygenerować. Mqb

@ugurvolkan7465 Жыл бұрын

Hello, I have a question: Autel or xhors? Which one should we choose?

@UnixCoDElectronics Жыл бұрын

Depend of what cars you are working and what is your needs, if you work on older cars then its xhorse you can make remotes with blade and precode xt27a ( just an example ). But you really need to check whats suits on your needs.

@toofy15 10 ай бұрын

I would say both of them