Wow. Michael, I can’t even begin to thank you enough for your superb, informative videos and meticulous testing. I’ve learned a ton from your vids. The fact that you created an enlarged model with PVC tubing and wooden pole to demonstrate gas block bleed off made me say to myself, “Now here’s a guy who really loves what he does.” THANK YOU THANK YOU, MICHAEL!
@MichaelBellmbell5563 жыл бұрын
Wow, thank you!
@scott22282 жыл бұрын
The enlarged model saved my sanity. I couldn’t figure out why I couldn’t get my rifle to cycle properly. I had it “wide open” which was causing too much bleed off. Which I assume caused insufficient pressure. Time to rebuild the rifle a 3rd time. It pays to understand the products ur using!!!
@MichaelBellmbell5562 жыл бұрын
Thanks for watching!
@Stopsign32v5 жыл бұрын
I could build a damn house from start to finish with you explaining it to me.
@MichaelBellmbell5565 жыл бұрын
Thanks.
@teddydavid28164 жыл бұрын
lol right he's a great explainer
@MichaelBellmbell5564 жыл бұрын
@@teddydavid2816 Thanks!
@deplorable-0ne4 жыл бұрын
The best part would be that your house would probably look like a gun when you are done. lol
@MichaelBellmbell5564 жыл бұрын
@@deplorable-0ne HaHa!
@w2rac4 жыл бұрын
I was always confused by the instructions SA includes with these. But your explanation makes perfect sense and now I understand how to use these. So back to the range I go to dial in my rifle!
@MichaelBellmbell5564 жыл бұрын
Thanks for watching. Please let SA know my video helped you.
@bgondee7 жыл бұрын
Good video I liked it. One issue that nobody mentioned either on the video or comments. The cyclic rate between the control and bleed off. This is huge. The bleed off SIGNIFICANTLY lowers the cyclic rate and that is critical for suppressed and full auto weapons. It also tells you that the bleed off is working far better than indicated in the video as the gas in the restricted flow is increasing the cyclic rate and pushing the gun harder...from what I can see at least 10 percent. With the bleed off there the cyclic rate for suppressed and unsuppressed would likely be similar. This is big just for that but also there is likely no need to change the gas setting when you plunk a can on there. I have been using a heavy-azzed MicroMoa gas block just for that reason. This is probably a better (lighter) solution...at least for me.
@yellowdog762jb4 жыл бұрын
I've watched a number of your videos, and they are all excellent. I have a brand new, adjustable gas block from another company sitting in my parts box. However, I watch this video everytime I get ready to do a build and decide that I just have to order another one of these or my build just won't be up to snuff. Superlative should ask to host your vids about this product. I'm not sure why they go to the trouble to make such a unique device and then completely fail to explain the advantages in using it. I've looked at numerous videos about this item, many don't even touch on the bleed off feature. Your production is by far the best on the subject. The pipe and dowel setup that you made is an excellent visual aid.
@MichaelBellmbell5564 жыл бұрын
Thanks! Please let Tony Russo at Superlative Arms know.
@davidcohn7235 Жыл бұрын
This information is gold. I was having all manner of function issues (ftf, fte) with a new rifle that has the SA adjustable gas block. Thanks to your videos, I now understand how the gas block works and … more importantly … a process to adjust the bleed off. It was horribly overgassed, putting way too much energy into the BCG. 30 minutes later, the rifle now runs like a sewing machine; just enough gas to function but not too much.
@MichaelBellmbell556 Жыл бұрын
Thanks for watching!
@alanmeyers3957 Жыл бұрын
👏🏿
@T_D_B_7 жыл бұрын
You should do these videos for mfrs or vendors. Very informative. Thank you Sir!
@MichaelBellmbell5567 жыл бұрын
Thanks
@daltonballenger7714 Жыл бұрын
I bought one and was kinda confused with the purpose of the bleeding of vs restriction. Now I'm very impressed, thank you.
@tantojutsuninpo6 жыл бұрын
Brilliant prop for explaining how it works. Thank you I'll be replacing my SLR that seized up and doesn't run right after getting the screw un-stuck
@MichaelBellmbell5566 жыл бұрын
Thanks for watching.
@MichaelBellmbell5566 жыл бұрын
Don't forget to check out the field test. Some interesting findings....kzbin.info/www/bejne/i6ircmymq9Caj6M
@chrisl7621 Жыл бұрын
Can’t thank you enough for this great explanation. I left the range a few days ago scratching my head over this gas block because i couldn’t get the gas dialed in. Shame on me because I didn’t read the instructions before setting off to adjust it. I just assumed it worked like every other AGB and the bleed off just happened in conjunction. Then when I couldn’t figure out why I couldn’t get the system adjusted and did read the instructions, I didn’t t really understand the bleed off concept. Now that I’ve watched your video everything I saw at the range all makes sense. Going to now watch your follow in video to see if you show how to adjust it. Thank you for a very informative video. I haven’t found a video this helpful in a looong time.
@markej48014 жыл бұрын
WOW! What a GREAT vid!!! Your detailed explanation of not only the install but actual function of the gas block has me totally sold and will be on my order for my 308 build. Your calm demeanor makes your videos easy to follow. As it happens, my first build has the older version of this gas block and was extremely satisfactory, so I've got total confidence now. THANKS!!!
@MichaelBellmbell5564 жыл бұрын
Thanks for watching and please fee free to spend some time exploring my channel if you get a chance. And thanks for the kind words.
@hatethevandals9 ай бұрын
Wow! Thanks for taking the time to build a mock-up to show how the system works. Unbelievably helpful
@erik30792 жыл бұрын
Great informational video. This definitely gave me the push I needed to buy this gas block. SA should be thanking you.
@MichaelBellmbell5562 жыл бұрын
Please let them know. Thanks for watching.
@Chris-ru9cq6 жыл бұрын
Always love your videos. I have purchased three of these gas blocks, so it's nice to understand how they work!
@MichaelBellmbell5566 жыл бұрын
Thanks. I do like the Superlative arms design and they are light weight.
@Johnblaze6784 жыл бұрын
Your explanation of this adjustable gas block was spot on. I particularly enjoyed your model of how the system works. Great job!
@MichaelBellmbell5564 жыл бұрын
Thank you very much!
@seanlan32606 жыл бұрын
Excellent video Michael! Your demonstration with the PVC pipe cleared up so many questions I had about this gas block. Keep it up
@MichaelBellmbell5566 жыл бұрын
Thanks.
@nungude740910 ай бұрын
Thanks for this man. My Superlative Arms AGB just came in the mail today, I installed it, but now I was really unsure how to adjust it. You cleared everything up very well. Thanks again, man.
@caliplinkersocal5776 Жыл бұрын
I'm a very visual person and while your camera work and lighting isn't the best, your explanations and mock up visual more than make up for it!!! I learned a lot from your video and greatly appreciate you sharing your knowledge and expertise!! Well done!!!!!
@MichaelBellmbell556 Жыл бұрын
Awesome, thank you!
@GreenSweeper4 жыл бұрын
Great video and demonstration of the SA gas block, they should be paying you for this video!
@MichaelBellmbell5564 жыл бұрын
I wish!
@Mojoman575 жыл бұрын
Great video - very informative. I have a .300 BLK 10.5" pistol that is way over-gassed. This is the perfect solution.
@MichaelBellmbell5565 жыл бұрын
Thanks for watching.
@kevinleben5792 ай бұрын
I use these gb on my 556 guns and soon to be my 308 build. Excellent illustration of the bleed off mode, I have to explain this to customers at the range fairly often.
@TheFacelessMan826 жыл бұрын
Great job explaining this system. You made it very easy to understand. Thanks.
@MichaelBellmbell5566 жыл бұрын
Thanks for watching.
@Dr_K5457 жыл бұрын
I really like your attention to detail, especially on the 2nd part to this SA gas block video. I have this exact gas block for a Aero 308 build. 18 inch barrel, rifle length gas system. I appreciate the time and effort you put in your videos. thank you. I am subscribed now, btw. Keep up the good work.
@MichaelBellmbell5567 жыл бұрын
Thanks.
@trashpanda23965 жыл бұрын
I did not know why the instructions said to continue turning ccw once at the max gas (4.5 turns out). Great video I know understand how the gas block works. I was restricting the gas and not actually letting it bleed off. Great explanation thank you!
@MichaelBellmbell5565 жыл бұрын
Thanks for watching!
@nathant38975 ай бұрын
Great model. I have two of these and they make a lot more sense now
@sirbondman0078 жыл бұрын
Excellent tutorial. You spoke slowly and used great visual aids. Thanks!
@MichaelBellmbell5568 жыл бұрын
Thanks! Please check out our channel if you get a chance.
@gogopossum4 жыл бұрын
Outstanding video! Very clear and well thought out commentary. I’ve dove into multiple videos of yours after this one. New subscriber!
@MichaelBellmbell5564 жыл бұрын
Thanks!
@mattbowen3940 Жыл бұрын
Excellent video! You answered all of my concerns on this gas block and it’s operation. Thank you👍👍
@MichaelBellmbell556 Жыл бұрын
Glad it helped
@Marc-tr5ny6 ай бұрын
Still the best video around explaining a ajustable gas block
@darrenschmitz27122 жыл бұрын
Your video helped me justify the extra cost of this product.
@MichaelBellmbell5562 жыл бұрын
Thanks for watching.
@cbrooks2767 Жыл бұрын
I love that model - told me everything I was wondering immediately when i saw it. Nice job!
@darinkleen68026 жыл бұрын
I enjoy the fact ur vids are always factual and I guess I would call it a scientific and objective approach to ur videos . Keep them coming!! Thanks Darin Kleen
@MichaelBellmbell5566 жыл бұрын
Thanks. Please peruse through my channel if you get a chance. I think I am up to 118 videos at this point.
@shramj3 жыл бұрын
Best explanation on adjustable gas blocks!
@MichaelBellmbell5563 жыл бұрын
Glad it was helpful!
@ccw22lr3 жыл бұрын
This video helped me decide whether this was the right purchase for me, THANKS!!!
@MichaelBellmbell5563 жыл бұрын
Glad I could help!
@Brian-ud6uj6 жыл бұрын
Great video! I can't see how you don't have more subscribers. Love the attention to detail and examples. You sold me on this for my Aero M5 build. Thanks for taking the time to do this!
@MichaelBellmbell5566 жыл бұрын
Thanks for watching.
@EarthAltar5 жыл бұрын
Brian, I'm doing an M5E1 build, and was wondering about this SA gas block. Did you use it, and after one year what's your impression?
@BafflingBS4 ай бұрын
Incredibly helpful and informative! Really, great job! Subscribed
@KACisWAC3 ай бұрын
Fantastic breakdown
@brianschaible39925 жыл бұрын
You touched on all the points good Sir. Most excellent.
@MichaelBellmbell5565 жыл бұрын
Thanks.
@Nite.StyleFD3 жыл бұрын
Very informative video, thank you
@MichaelBellmbell5563 жыл бұрын
Thanks for watching!
@16vt Жыл бұрын
The reviews the manufacturers *shoulda* done! Thanks!
@MichaelBellmbell556 Жыл бұрын
Let them know that
@yellowdog762jb4 жыл бұрын
Excellent video! I just bought one of these gas blocks and it came with zero instructions. I went to their website and there are no instructions there either. I'm baffled why they'd make such an awesome device and then not support it one bit. This was extremely helpful. Thank you! I too wondered about increased perceived sound with a can. I didn't think to wonder about bullet velocity, but I was wondering if there would be any flash from the vent.
@MichaelBellmbell5564 жыл бұрын
Thanks for watching. My review was objective but positive because it seams to work very well. I wish I could get them to support the videos with an affiliate link but no response from them on that issue.
@yellowdog762jb4 жыл бұрын
@@MichaelBellmbell556 Their loss.
@cjcollins98082 жыл бұрын
great video and explanation. the makeshift model was a great aid for me visually. good stuff!!!
@MichaelBellmbell5562 жыл бұрын
Thanks 👍
@heikoom4 жыл бұрын
I know this video was 3 years old but damn was it just what i was looking for! I wonder how well that gas block has held up over 3 years??
@MichaelBellmbell5564 жыл бұрын
No issues so far.
@MichaelBellmbell5564 жыл бұрын
Don't forget to check out my field test of this gas block, and if you get a chance please check out the rest of my channel content also.
@righteousone84542 жыл бұрын
Thank you for explanation, Michael
@MichaelBellmbell5562 жыл бұрын
My pleasure!
@milo5551005 жыл бұрын
Great review Dr Bell. Thank you!
@MichaelBellmbell5565 жыл бұрын
Thanks for watching!
@chadwickwicky675 жыл бұрын
Thank you so much for explaining how it works. The instructions while yes it tells you what to do but for someone new to a bleed off block, I so hate to admit it but it had me scratching my head. Iiterature is so contradicting, states “patented bleed off system, bleeds instead of restricts” in a nutshell. But yet states turn counter clockwise 4.5 turns to “fully open” maximum gas pressure... then at first I misread and thought you’d naturally turn clockwise to decrease gas and counter clockwise to increase. Which from here yes clockwise would decrease because it restricts gas, however counter from there also decreases .... now I understand this is where bleed off starts... so in essence it does act as a conventional restricting gas block up to 4.5 turns out and then bleeds off thereafter fully open.... Haha I feel like an idiot but seeing your video before my first time out with it really would’ve saved me a lot of headache! They should state that inside 4.5 turns is restriction and outside 4.5 turns is where bleed off starts. That alone would explain a lot. Either that or I am an idiot but bleed off gas blocks being brand new to me I had no idea how it worked.. Thank you again for clearing this up! 2 years later and still helping people understand!
@MichaelBellmbell5565 жыл бұрын
Thanks.
@codyjones67804 жыл бұрын
You're not the only one man, I have had to retune my can like 3x now and I finally understand how it works. It was worth it but their instructions are vague to say the least.
@Pstadelman751 Жыл бұрын
Great video! Excellent demonstration
@MichaelBellmbell556 Жыл бұрын
Thanks
@jasongaudreau20755 ай бұрын
Btw….Luth ar has an adjustable gas block for $17!!! From the reviews I’ve read, the “detent screw is in the back of block facing shooter, and is extremely hard to adjust with any fore rail. But, the price discrepancy makes me believe it’s complete crap! But, I have a “extra” 16” upper that I’m building for long range….i will be running it suppressed (ocl polonium) 99% of the time. I believe I’ll throw $18 to luth ar to see how it goes. Adjust it with rail off and keep it that way. Maybe find a sweet spot between canned and uncanned
@nexus6999 Жыл бұрын
Great insight into this product! Thank you!!!
@drewduggan464 Жыл бұрын
Michael, this is a fantastic video. Thank you for really good thorough information! I want to talk to you about every gun question I have! Lol Really great content sir!
@MichaelBellmbell556 Жыл бұрын
Thanks!!!
@jrossnjax7Ай бұрын
Great video but need close up as you explain and more light but other than great video! Very helpful. 👍
@MrStudzdog6 жыл бұрын
Thanks for the video. Very clear explanation appreciate the time you put into it.
@MichaelBellmbell5566 жыл бұрын
Thanks for watching.
@jaydeveas2930 Жыл бұрын
Great Vid!!!
@MichaelBellmbell556 Жыл бұрын
Thanks!
@anthonyshepard96065 жыл бұрын
Outstanding informative information. 🐢🇺🇸🐢🇺🇸🐢🇺🇸
@null24704 жыл бұрын
Thanks for this video, it came with no instructions at all.
@MichaelBellmbell5564 жыл бұрын
Thanks for watching.
@GasTank877 жыл бұрын
In the video you say you can run the block in restrictive mode if you choose to. While that is true, just FYI, I just talked with Superlative yesterday because I had some questions and they informed me that the block is designed to always be run in bleed off. The only reason the restrictive part is there is for the option to completely close off the gas if needed or wanted. Just thought I'd pass the info along.
@MichaelBellmbell5567 жыл бұрын
Understood. I was doing it for testing purposes. The whole design patent is based on offering bleed off, otherwise this is "very similar" to the SYRAC design.
@brandong897811 ай бұрын
This was very helpful. Thank you!
@johnsonjerrad4 жыл бұрын
That barrel looks awesome.
@MichaelBellmbell5564 жыл бұрын
Green Mountain fiinned.
@janwilliams1782 жыл бұрын
Superlative arms adjustable .625 gas block is working very well on my 16" ar.
@MichaelBellmbell5562 жыл бұрын
Very nice!
@saculreab27457 жыл бұрын
Great videos Mike! I just completed a 300 black out upper with the set screw version of this gas block. The installation instructions that came with this gas block say "Carefully slide the gas block towards the shoulder, allowing for a .025 gap (use feeler gauges) between the shoulder of the barrel and the back of the block. This will locate the gas hole in the barrel with the gas hole in the block." I noticed you pushed yours all the way up to the shoulder, and have had no problems. I also pushed mine to the shoulder, but haven't test fired it yet. Do you have any feedback on this? Thanks, keep up the good videos!
@MichaelBellmbell5567 жыл бұрын
I routinely leave .030" gap between the shoulder and gas block.
@WalterWhite-gw3vm5 жыл бұрын
That is one wicked looking barrel Mike
@MichaelBellmbell5565 жыл бұрын
Thanks, I like it too!
@sithyarael68078 жыл бұрын
Good info. I have been wondering about getting this gas block.
@charlesparker8385 жыл бұрын
Awesomeness. Great video. I know its a late comment but just found it. Keep up the gr8 work.
@MichaelBellmbell5565 жыл бұрын
Thanks for watching, please check out my channel if you get a chance.
@1bvanzalen4 жыл бұрын
Very well done sir. Thank you.
@MichaelBellmbell5564 жыл бұрын
Very welcome
@tomlee62635 жыл бұрын
Great explanation, thanks a million!
@MichaelBellmbell5565 жыл бұрын
Thanks for watching.
@brianmaney86874 жыл бұрын
Good to Finally hear someone in the gun world say the word ambidextrous correctly.
@SM-ii8pg3 жыл бұрын
Glad I'm not the only one confused as to where they picked up the extra letter
@mariohebert77424 жыл бұрын
Great explanation!! Very helpful
@MichaelBellmbell5564 жыл бұрын
Thanks for watching. Please check out my channel if you get a chance.
@anonymouscitizen27323 жыл бұрын
thank you, I learned quite a bit.
@MichaelBellmbell5563 жыл бұрын
Glad to hear it!
@nathanbrunner53955 жыл бұрын
Your like the Tom silva, norm Abram from this old house, except for guns. I like it.
@MichaelBellmbell5565 жыл бұрын
Thanks!
@jasongaudreau20755 ай бұрын
Thank you for all that you do! My question is….what’s the value of a “clamp on”? In my particular case…I want to add it on to a manufacturer built rifle (iwi Zion 15) and I’ve noticed my existing block is the set screw style, meaning it’s most likely pre dimpled for the block. In which cases would a person prefer the clamp on (besides a non dimpled barrel…wouldn’t you want to use the set screw and just mark and dimple your barrel? Seems like the best way to confirm gas hole alignment.
@shellfish50782 жыл бұрын
Wow. This is some of the best in depth research I’ve seen on KZbin. So with a 16 inch mid length un suppressed would you recommend to use the restrictive settings or the bleed off settings with this gas block on a DI 556 ar
@MichaelBellmbell5562 жыл бұрын
Restrictive to give you just a bit more velocity, but either will work well.
@jumpman23344 жыл бұрын
Thank you for this. Superlative arms is absolutely zero help when it comes to explaining the design.
@MichaelBellmbell5564 жыл бұрын
Thanks. Be sure to check out the field test video. Thanks for watching.
@garretthall3952 Жыл бұрын
Very informational Thankyou
@douglasbattjes3991 Жыл бұрын
Great review, also you used the wrench to tighten the barrel nut, I have the same handguard and the with on the 1 1/4" nut won't fit any wrench's I have, they run on a taper towards the inner part of the wrench, at the end of the wrench it's .457 and towards the inside it's .578, the width just a little ways up the jaws. Where did you get the one you used with your socket ratchet ? Looks like I can even make one on my mill from 3/8" flat stock. Well done video, 👍👍👍👍👍👍 Thanks so much Michael
@MichaelBellmbell556 Жыл бұрын
I believe it came with the handguard.
@noretreat20747 жыл бұрын
just subscribe to your network.....I do my field testing by brain logic, and now with your videos I can save myself from some heavyweight migraines. I am reviewing ALL your videos/ they are fantastic..... thank your for your time.. I am trying to accomplish the same results as a adj. block but with buffer weights and springs (giving gasses time to exit) using the dwell distance and muzzle exit distance from block ( using mid. and rifle gas ports) as the main factor... QUESTION: do you think I'm wasting my time.. ...all black rifles matter..
@MichaelBellmbell5567 жыл бұрын
I have a wide variety of buffers and springs to tune different systems as I go. Sometimes changing ammo causes issues. If you can asses whether there is too little or too much pressure you can change the buffer or spring and fix the issue on the spot. In this video ...kzbin.info/www/bejne/oZq1qpWfhK11bs0... I ran into an under gassed situation with the wolf .223 in full auto with a heavy spring and buffer. Tuned down both and ran smooth as silk.
@Real_Tech_Skills7 жыл бұрын
I really enjoy your in-depth video reviews. Add another person to your "subscribed" list! How would you compare the Superlative Arms Direct Impingement Bleed-off Adjustable Gas Block to the Superlative Arms Piston Conversion kit for anyone looking to build a highly reliable custom AR-15? Are either products something that you would trust to install on a rifle that you might need to bet your life upon (my particular usage is home/self defense)?
@MichaelBellmbell5567 жыл бұрын
I like the piston better. I think with the piston kit you maximize the benefits of the bleed-off design. I would trust my life with this system if the rifle did not have to be fired 10,000 rounds. I have not tested it enough to know what the longevity is. So far there appears to be no issues at about 1,500 rounds.
@Real_Tech_Skills7 жыл бұрын
Thank you, Your opinion is greatly appreciated. Personally I prefer a Piston over DI, but I would have built a DI rifle if it was more reliable.
@Real_Tech_Skills7 жыл бұрын
Yesterday, I spoke with Rob Mccue from Maligator Tactical. Rob has EXTENSIVE knowledge/experience with the Superelative Arms Piston kits. Some of his firearms have over 15,000 rounds through them using the Superelative Piston kits. Rob reports zero malfunctions with the system. Maligator Tactical (Rob's company) also builds/sells complete uppers using the Superelative Piston kit products for the general public, as well as many law enforcement personnel. Rob will openly state that he would bet his life on it and that he wouldn't sell it to anyone else if he thought that it might be an unreliable addition to a firearm. Between your reviews and knowledge sharing and talking with Rob (for over 2 hours on the phone), I am sold on the product.
@specialk50707 ай бұрын
i love mine and have beat the crap out of it 👊 still goin strong
@airheadbit19842 жыл бұрын
I purchased a block but couldn't figure out how to align it since it doesn't have the standard bottom two allen screws, then he talked the video to death blew pass the install!
@MichaelBellmbell5562 жыл бұрын
They have an allen screw model. If you center it it will be fine in regards to the gas port.
@jasongaudreau20755 ай бұрын
Also, another thing in verbiage that gets confusing is “clicks” vs “turns”. You say 4.5 turns gets to bleed off function. Meaning 4.5 times around “the clock”….how many “clicks” does 1 turn equal. (Just asking as I’m waiting for mine to ship from optics planet…yes, it was “in stock” lol) and am gathering as much info as possible for my install/operating of device.
@H538-w3q4 жыл бұрын
Recently I read a thing in TFB about a Socom profile barrel that the Army had patented that was finned very similar to the GM barrel you are using.
@MichaelBellmbell5564 жыл бұрын
Cool!........get it?!
@jr108 жыл бұрын
Another great one Michael.
@MichaelBellmbell5568 жыл бұрын
Thanks!
@jr108 жыл бұрын
I was wondering. Do you think these gas blocks running in a bleed-off setting would keep the BCG cleaner and cooler then a standard DI system?
@MichaelBellmbell5568 жыл бұрын
Yes. Any adjustable gas block will decrease the amount of hot gas that goes into the operating system. This will make things cleaner and cooler. The difference between bleed-off and restriction comes in when you are suppressed. The bleed-off gas block has an advantage over a standard restrictive gas block when there is a suppressor on the end of the barrel.
@jr108 жыл бұрын
Thanks Michael. I thought that might be the case. If you get a chance when you get ready to field test this block, could you try and show the difference (if any) on how the BCG differs with respect to soot and grime from restrictive or bleed off ?
@MichaelBellmbell5568 жыл бұрын
Yes, I was packed and headed out yesterday and a thunderstorm moved in while we were on the way to our property ("bullet creek" the name the kids came uo with). I thought I might take the go pro up close to the ejection port and do a mag dump with restriction vs bleed-off to see if you can see any difference in the amount of smoke and debris coming out of the ejection port during a 40 round full auto dump. I thought this might be a way to demonstrate a difference between the two techniques of adjustment. Plus it will be FUN. Going out in boat today but my truck is packed and ready to go out in the field Monday if weather is OK.
@jonmcelrone93897 жыл бұрын
regarding the slide lock charging handle. i had one on my .308 build and nearly every shot the handle would cycle back when firing and after maybe 35 rounds the charging handle broke. mega replaced it fast but I do not plan on ever using it again
@MichaelBellmbell5567 жыл бұрын
I was very disappointed. Mine sits in a spare charging handle box.
@dougbotha87682 жыл бұрын
That was very helpful
@MichaelBellmbell5562 жыл бұрын
Glad it helped
@sweet65mustang6 жыл бұрын
It's almost scary watching your vids. I'd swear you can hear me talking to you. You some how answer all my questions as i ask them.
@MichaelBellmbell5566 жыл бұрын
Thanks for watching.
@wadehove85844 жыл бұрын
You did a great job explaining this! Can you post a link to the continuation of this build? Thank you in advance!
@MichaelBellmbell5564 жыл бұрын
Here is the field test...kzbin.info/www/bejne/i6ircmymq9Caj6M If you get a chance please check out my channel I have about 140 review videos so far.
@Scooter_cash2 жыл бұрын
Seems like a good idea but I think that bleed off right under my hand is goin to eventually lead to extra heat on my hand and dirty up where I hold it
@MichaelBellmbell5562 жыл бұрын
piston guns do this
@DanielBoone3373 жыл бұрын
How does this clamp on do as far as being a secure attachment method to the barrel??? Meaning have you had any problems with it walking, rotating, or coming lose is some way? Im looking for a good adjustable gas block for a 6.5 Grendel Proof Research barrel that I'm building a rifle around and I've never used a clamp on before I always dimple my barrel for set screws... Great video just subbed...
@MichaelBellmbell5563 жыл бұрын
This is the set screw model. I use Rocksett. The gas blocks have stayed secure.
@jimadams98747 жыл бұрын
On the hearing test. Which test point did you use for test , front left of gun or at shooters ear? I know what industry standard is , military is said to have moved tk shooters ear.
@MichaelBellmbell5567 жыл бұрын
Ear.
@akrabimmurray25153 жыл бұрын
My instructions state differently per clicks: 0:closed, 1-17 (4 1/4 turns) restrictive, 18 (4 1/2 turns) fully open, 20-48: bleed off mode
@MichaelBellmbell5563 жыл бұрын
They may have changed the threads or port placement. Go with instructions that came with the kit you have, Same physics apply.
@DRTBIKE9 ай бұрын
Great video man! I have a ar10 243. So if I back mine out all the way I'll be at full bleed off right? I'm using a supressor. My thinking is to back it out all the way an start turning it in till I can eject 3 o'clock an lock back on one bullet. Basically the exact opposite of using the restricted part of the block.
@larrynorby99964 жыл бұрын
Very helpful....thank you
@MichaelBellmbell5564 жыл бұрын
Thanks for watching.
@jonnyd51064 ай бұрын
Hi, great videos, would you say it’s worth installing this on 11.5 inch sbr which will always be used with a suppressor. Brand is Daniel Defence ddm4- 7s.
@farmernat653 жыл бұрын
Awesome.
@MichaelBellmbell5563 жыл бұрын
Thanks!
@dukebeach16 жыл бұрын
I just stumbled upon your site, and I have to say, you have a real gift for clearly teaching and demonstrating. I'm new to the AR world, and I want to upgrade my Ruger AR-556 and an incoming S&W MP10. What is the bar that you placed the upper receiver in to do your build? The piece that is held by your vice? I'm sure that is a dumb question, but I'm shopping for tools for the AR platform, and I notice that there are multiple ways to secure the upper receiver for working on it. Seems like AR-15 and AR-10 tools and builds are really interchangeable?? Thanks in advance.
@MichaelBellmbell5566 жыл бұрын
Geissele Reaction Rod. Check out my "AR 15 Clinics" when you get a chance, and thanks for watching.
@dukebeach16 жыл бұрын
Thanks Mike. Will do.
@American03137 жыл бұрын
Can you make the necessary adjustments with a rail system / MLOK hand guard installed, or do you have to tune it, then install the hand guards?
@MichaelBellmbell5567 жыл бұрын
You make the adjustments with the hand guard on using a long allen wrench..
@American03137 жыл бұрын
got it. Thanks!
@whitedime2 жыл бұрын
Awesome video. I have this and a snach charging handle and still get domed with a decent amount of gas. My system also fails to completely cycle sometimes. Would allowing more gas allieviate both of these issues?
@MichaelBellmbell5562 жыл бұрын
What weight buffer? Barrel length?
@jasongaudreau20755 ай бұрын
Any malfunctions with that charging handle? Looks a lot like a raptor.
@djsity4 жыл бұрын
Great video, but i actually I have another question for you. Their website says "the gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw". Did they change the design because in this video the screw does restrict the gas flow for the first 4.5 turns. I emailed them but I'm not sure if they'll reply. Thanks!
@MichaelBellmbell5564 жыл бұрын
No they did not change the design. With bleed off it does not restrict. This is one statement they make that I do not agree with. The screw is still exposed to the exhaust gasses.
@davidf83224 жыл бұрын
Great informative video! I was curious if you could give me a little more info on the handguard? I just purchased this gas block and am having trouble finding a handguard that has enough clearance. All of the UTG Pro ones I've looked at dont seem to have enough room
@MichaelBellmbell5564 жыл бұрын
This build is a UTG PRO. Worked fine. The gas block is a set screw type not a clamp on.