Surpass Hobby Esc Programming Card How Too

Surpass Hobby Esc Programming Card How Too
in this video we look at how to use a surpass hobby Programming Card for a esc on a rc car these are really easy to use if you know how to use them so i thought i would take the time to show how to do it as i had no idea myself
Wltoys 124019 www.banggood.c...
Skyrc Gps Bluetooth www.banggood.c...
Wltoys 144001 www.banggood.c...
Dumborc X6 www.banggood.c...
Imax B6 Charger www.banggood.c...
Surpass Hobby Motor esc www.banggood.c...
Hobbywing Max10sct www.banggood.c...
Makerfire shop.makerfire...?aff=275
WPL www.wpl-rc.com....
...​

[@CalebZaharris]

Thanks. Excellent timing. I can confirm that your process works on a racestar 60a esc, using the racestar card (which appears to be identical to the surpass card)

[@bigbeardrc4145]

Thanks buddy for confirming that really appreciate it

[@Nickbaron27]

Thanks for the clear and simple video very helpful 👍

[@edgartorres6602]

Thank you, you made it look easy

[@makrcmodels6076]

great video mate, hopefully this help a few people out

[@bigbeardrc4145]

Yeah it's easy to do but some people have struggled with incompatibility

[@makrcmodels6076]

@@bigbeardrc4145 gotta check the comparability

[@danyfpv4776]

Nice video👍 do you have a link where to buy this card ? I have a surpass hobby esc too

[@sy55legrc]

I was looking at getting one of these when I changed the esc on the Mav may invest in one now

[@bigbeardrc4145]

Good bit of kit to have dude and cheap aswell

[@foxhoundra6444]

Hey dude what is a good metal steering cup for the a959? Nice vid super helpful

[@tedsimington7654]

Thanks for sharing Sir👍

[@mangosouljah]

hey, is 60a or 80a esc enough for 3s? cheers

[@steviefpv]

I wish they started the lipo cut of from 3.1 up to 3.6

[@maxwaddel8291]

i just got a new brushless motor and esc system from surpass rc and the programming card came with the kit. my work state light only flashes. i’ve tried flipping the wires. plugging it into the motor unplugging the motor nothing seems to be working could you help me out

[@moonshineRC]

Can you use a brushless program card on a brush system?

[@BradypatRC]

Nice tutorial, very helpful 👍

[@bigbeardrc4145]

Cheers.hope it helps someone

[@BradypatRC]

@@bigbeardrc4145 it will bro 👍

[@riley5032]

My brake is set to forward for some reason so when I go in reverse the brake activates when I go forward I need help

[@bigbeardrc4145]

You have 3 stages fwd brake and reverse so if you are going forward and move to brake it brakes the same works with reverse

[@479wrecks2]

Did you make a video for recalibrating the ESC if you did not how do I recalibrate it thanks I have a red soils light on my surpass hobby esc I have steering but no throttle I messed with my th trim and it's still not doing nothing

[@dejcalibuso5407]

Can use this program card on surpasshobby brushed esc?

[@Jayzkayaydancasper]

Please help me with my rc I have a deerc 300E brushless rc car with a 25a 2-3s lipo esc I want to get a program card as my card chogs and I have to pull trigger fully to get it moving

[@thomasvaughan294]

Great video. Do not have a program card yet. Anyway of programming or reserting the Surplus ESC without one? Having problems with mine. Also does your esc red led light up when you throttle or reverse? Thanks.

[@bigbeardrc4145]

Yes my light activates on throttle and reverse on the esc.unfortunately I don't think there is a way of resetting without the card sorry buddy

[@thomasvaughan294]

@@bigbeardrc4145 Thank you for responding.

[@bigbeardrc4145]

@@thomasvaughan294 I always aim to respond to every comment buddy

[@thomasvaughan294]

@@bigbeardrc4145 first time I've had a response. 😄

[@bigbeardrc4145]

@@thomasvaughan294 from me ?? Sorry buddy ill try not to miss it again

[@cdnaz01able]

sir ,,the program card is connect to receiver cable from esc aite? im a newbies ..

[@bigbeardrc4145]

Yes buddy you unplug the esc from receiver and connect

[@cdnaz01able]

@@bigbeardrc4145 tq my bro

[@dustinplee5067]

If my surpass hobby queen esc 80a is not wanting to make my motor to start moving it’s just making my motor kind of kicking for a little bit and after a few minutes it finally goes and when I let go of the throttle it starts doing the same thing

[@bigbeardrc4145]

It's called cogging,either bad connections or the esc isn't working right sometimes happens with cheaper escs

[@zailykoh8506]

Hello... Can this esc change mode? F/B/R F/R F/B?

[@bigbeardrc4145]

No mate it cant

[@beejsonw]

My work state light just keeps flashing won't go out. 120amp surpass esc 3s?

[@bigbeardrc4145]

Have you flipped the wire round if you have it maybe the wrong card

[@beejsonw]

@@bigbeardrc4145 could be the wrong card. It's a racestar card but a surpass esc. It says it'll work with 120amp but if the racestar one isn't compatible that would be the issue. Looks exactly like yours tho.

[@bigbeardrc4145]

@@beejsonw they are different bro even though there basically the same esc and card

[@TheMandeep125]

anyway to calibrated the esc for throttle range on the controller?

[@bigbeardrc4145]

Not on the surpass but some controllers like the dumborc have a built-in function for doing it

[@TheMandeep125]

@@bigbeardrc4145 gotcha, thanks for the reply! Great videos.

[@gennarobottino6303]

hello friend congratulations nice video, a question I have a battery esc 120a 2s 7.4v on the board where but put? 3.1, 2.9, 2.7 ,? please explain to me friend what these values ​​mean 3.1 2.9 2.7 what are they for? heartfelt thanks friend

[@bigbeardrc4145]

Lipo cut off.how low the battery goes before it stops

[@gennarobottino6303]

@@bigbeardrc4145 so does it mean that on 3.1 when the battery is getting low and reaches 3.1v per cell it goes out?

[@bigbeardrc4145]

@@gennarobottino6303 yeah exactly that it goes into low voltage mode

[@gennarobottino6303]

@@bigbeardrc4145 thank you very professional friend. I have a battery from 7.4 2s so on 3.1 I turn a little and stop? if I put at 0 lap more but I drain the whole battery? 

[@bigbeardrc4145]

@@gennarobottino6303 3 1v per cell so 2s is 2x 3.1v so 6.2 v

[@anpo9277]

Hi man , do you know if i can try this programming card for a WLTOYS ESC 120A A979?

[@bigbeardrc4145]

Hey buddy.only if its a surpass hobby esc.i wouldn't recommend it otherwise

[@anpo9277]

@@bigbeardrc4145 ok thanks.... because i dont find a programming card for this esc online....... bye!

[@jacobevans7079]

Will this help with throttle delay? When I pull the throttle and it takes about 1 to 2 seconds before the car starts to move

[@bigbeardrc4145]

It may help a little but setting your end points will help more

[@jacobevans7079]

How do I set end points? Sorry I’m new to the rc family.

[@bigbeardrc4145]

@@jacobevans7079 i have a video on setting end points pyt each esc manufacturers are different if using a dumborc with the surpass you,can use the manual for the dumbo

[@jacobevans7079]

I have a goolrc 3500kv motor and ese combo

[@bigbeardrc4145]

@@jacobevans7079 ive never used the goolrc stuff before buddy

[@lyftjennings1890]

Super late lagg on my first run. Ordered the surpass card since none of the other program cards work with surpass hobbies esc lol

[@bigbeardrc4145]

Hey buddy thanks for watching.its a strange one these cards there are lots that are identical but wont work on other esc.mine was a bit slow to react aswell,for the price I think these cards are a good investment

[@dustinplee5067]

My Surpass hobby program card is not letting me move left or right or down what do I do I have a 120a esc

[@bigbeardrc4145]

Is it definitely a surpass esc ?

[@dustinplee5067]

@@bigbeardrc4145 No it’s not I don’t think so I don’t know though

[@bigbeardrc4145]

@@dustinplee5067 send me an email with a pic

[@dustinplee5067]

@@bigbeardrc4145 120A Brushless ESC Electric Speed Controller for 1/10 1/8 RC Car Accessories it’s one of these it on eBay

[@bigbeardrc4145]

@@dustinplee5067 if it ain't a surpass esc it won't work

[@stevelampard]

Shame you can't lower the neutral range lower than 9% for a faster trigger response.

[@jakobkrafteltzholtz4990]

second option is 6%... ;) (they go "9% --> 6% --> 12%")

[@jonathanmackey3282]

What's workable mean

[@bigbeardrc4145]

Means useable

[@jonathanmackey3282]

Thank you

[@grrfy]

I think my card must be broken, darn it ! just came here to make sure I was doing it correctly and state light just keeps flashing

[@bigbeardrc4145]

Email me your address and I'll post you 1 I have a spare 🙂

[@nickwilliams6869]

Mine is doing the same thing

[@Thomas_64]

for me the work state light just blink all time

[@bigbeardrc4145]

Either a dodgy card or it's not the correct 1 some a copies and don't work

[@Thomas_64]

@@bigbeardrc4145 I did some research and it is my esc that cannot be programmed 🤣 Thank you for your answer

[@bigbeardrc4145]

@@Thomas_64 oh bugger well at least you worked it out take care buddy

[@Thomas_64]

@@bigbeardrc4145 merci toi aussis 😄