Surron QS165 modified motor and controller more powerful (2)

[@electroendurodiary]

Looking forward to test results:) is this fardiver 72530? Then it should be even more torque then bac4000.

[@eloi3576]

Hello, I have a qs 165 encoder version. I have an issue with it. It shows "Motor hall error" I suspect the encoder board to be faulty, there are 3 wires coming out for encoder signal (green, blue and yellow), the green and yellow are outputing 0 to 3v depending on the motor position, but the blue wire signal never changes, it's always at 0V. How could I test the sensor board to see if it is the problem? Thank you very much for your help

[@jayjay6782]

You can buy mine if you like , overheats worse than the standard motor and Fardriver support is like Santa , it doesn’t exist .

[@kalihiwai420]

I am interested in purchasing this from Aliexpress, its in my cart now but I would like more data on the battery consumption with the stock battery for SurRon X, thank you

[@bllgull]

Can you share your settings? Torque is smaller than expected

[@kalihiwai420]

What controller are you using?

[@fuzecap]

how did you increase the noise?

[@yodi5257]

I have this setup 72270 + QS165 encoder but it doesn't work ! No much power more than 8KW (my sabvoton was really much powerfull with stock motor)... And when I activate weakening, it behaves completely erratically with very violent sudden engine braking when I release the throttle! It returns -60A in my battery ! It's very dangerous, I get so much reverse current as soon as I release the throttle that locks up my rear wheel skids at 70 km/h ! Even while follow is disabled ! And when i desactivate all is about weakening, it works fine, but i have less power than an a stock surron... 72270 + qs165 encoder, it doesn't work, it's bad and moreover super dangerous! I don't recommend it to anyone for now 😬 I hope there will be a decent update to unlock the full potential of this hardware and resolve weakenin problems... Wait and see

[@shimbofpv6224]

Its plug and play for a surron? I have the road legal version can i still.use the lights,.turn signals,horn...? Thx for the video!

[@Peter-Zhu]

Of course, you can use all the functions of the original.

[@mayruaxehiroma3803]

How is maxspeed when use this motor + controller with original Surron Battery?

[@Peter-Zhu]

85KM/H

[@mayruaxehiroma3803]

@@Peter-Zhu ​ @Wood Niu so it's not more powerful than the original Motor + Controller?

[@Peter-Zhu]

@@mayruaxehiroma3803 Correct it, it should be around 90-100KM/H, we didn't dare to ride that fast, it's too dangerous

[@mayruaxehiroma3803]

@@Peter-Zhu Do you find it much stronger than the original? I am also ordering it. Looking forward to hearing from you

[@Peter-Zhu]

@@mayruaxehiroma3803 I will upload the data later

[@angelodicicco9146]

Where did you buy both of them?

[@azhz760]

Hello. I am very iterested to see how much more power you get? did you buy 72530 controller with motor? for using with stock 60v battery? I am thinking about upgrading so i get more speeg and torque but not sure if i will du like you or buy bac 4000 or some else upgrade. I think if your upgrade with new engine and controller seem more intresting to me and keep stock battery. Let me know how it runs when you try it:)

[@Peter-Zhu]

I will test later.

[@azhz760]

@@Peter-Zhu Hello again sorry for asking again but have had a chance to try it yet?

[@azhz760]

can you send me a link to where you bought this engine and controller please:)

[@Peter-Zhu]

@@azhz760 www.aliexpress.com/item/1005004028123870.html?spm=a2g0o.productlist.0.0.ead274e1xzHNMc&algo_pvid=79fc236a-8403-4f7e-bec9-3a7473006d96&algo_exp_id=79fc236a-8403-4f7e-bec9-3a7473006d96-4&pdp_ext_f=%7B%22sku_id%22%3A%2212000027792559618%22%7D&pdp_pi=-1%3B699.0%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch

[@Peter-Zhu]

@@azhz760 Are you Andreas?

[@surronzak8154]

Hi, where can I get the QS controller aluminum cover for sur ron please ?

[@Peter-Zhu]

What is the aluminum cover you are talking about, do you have a picture?

[@surronzak8154]

@@Peter-Zhu I mean the one in your vidéo, but I found one

[@Peter-Zhu]

@@surronzak8154 We have so many

[@atomp153]

Did this work successfully? I want to do this with my x160

[@topelite666]

Can this motor work on stock surron X controller?

[@Peter-Zhu]

Sorry, it can't.

[@FullyChargedebikesdublin]

Hello did your controller was plug and play I mean socket wise ? Thank you

[@Peter-Zhu]

Yes, Plug and Play

[@FullyChargedebikesdublin]

@@Peter-Zhu I’ve got mine but I don’t think it’s plug and play

[@Peter-Zhu]

@@FullyChargedebikesdublin We redesigned the plug and defined

[@FullyChargedebikesdublin]

@@Peter-Zhu I was thinking that socket need to be re wired I can’t find any info about existing surron loom where to connect new controller

[@phillipdebono1946]

Did you ever get it to work? So it’s not plug and play?

[@ColoradoAdventureClub]

I noticed your blur on the battery it went from 100 to 0 when you peg the throttle... that cant be good....

[@Peter-Zhu]

Please don't mind, that's just a 48V test battery