Suspension of a Formula SAE car 🤯

[@MulletMadness69]

This is sweet to see, thank you!

[@frederickmarshall8544]

Ah Rod-Ends in Bending! Don’t tell Claude

[@adithyarajeev7566]

I am a fresher in meche , really interested to be part of the college student formula team. I had some doubts about your setup. 1) Why did you go for a direct acting setup at the front , could have used rocker arm pushrod and mounted the rocker arm body on the front hoop ..(a good defence would be it messing up the airflow , but the driver is right after that , so it doesnt matter right ) ..i mean with rocker arm pushrod at the front , tuning motion rations would be easier right? 2) in the rear , why not going with longtitudinally mounted dampers ? i see you have space up front , so instead of mounting your damper body on the differential mounts , why not try mounting it to the engine mounts , (longtitudinal setup would decrease the MOI and I think facilitates running a u type ARB as in for lateral dampers would be more suited with z type ARB (Again the forces will be acting in different planes for a z type ) again idk the practicality of all these , but curious after i saw this setup.. anyways Good job guys , looking forward for more videos

[@Rodri_RIDER]

How does the transmission work, do you have bearings connected to a differential? work with different pinions and crowns?

[@EAGLINWRX]

Generally fsae cars have a motorcycle engine IE, they will use the built in transmission, then a chain will lead to a drexler diff in the back and take the power to the wheels.

[@Racing_Fox]

@@EAGLINWRXto be honest though who even runs ICE in their Formula student cars these days. EV is the way 💪

[@EAGLINWRX]

@@Racing_Fox there’s more cars at the fsae IC event then fsae EV event. EV has a much more expensive barrier to entry then IC. Also from a team that is running both cars this year. The challenges of each car are vastly different.

[@LaggerSVK]

@@EAGLINWRX not true in Europe. Because FSG chose the driverless category and it is far easier to get sponsors for EV these days form automotive so even the best ICE teams switched to EV now. The ICE category is pretty much dead.

[@EAGLINWRX]

@@LaggerSVK FSG and FSAE are two different competitions. FSAE is in the americas generally. FSG is a part of Formula Student. They run under different premises and more importantly rules.

[@ajikandavid7373]

Nice explanation. Please whats the spec of the coilovers?

[@Racing_Fox]

What year is the car? I assume it’s an older one given the space frame and combustion engine (and the want to not get too public with your current car) They’re such cool little things though, park one up next to an F1 car and they look like toys

[@aperson-b5t]

how come both control arms are mounted to the car on the same horizontal level as each other?

[@MotownModels]

Kinematic points. If your control arms weren't on the same plane, they'd essentially be fighting each other when moving vertically

[@michaelmilberger9013]

They're not actually on the same plane. They both point at an "imaginary" axis called the roll center, where both sets of arms could be considered as rotating around. The imaginary roll center axis can be far out to the side of either the right or left of the cars vehicle centerline. Look up double wishbone roll center on Google images for a better explanation

[@marcelo_urban]

How much does this car weigh?

[@RamanKasabrukhau]

Wait, can't the rear suspension also have the dampeners directly on, or is the force of the rear too big?

[@Zireael1706]

Generally due to space constraints as the rear part has the drive shaft also. Also much more freedom to adjust parameters like motion ratio and all.

[@RamanKasabrukhau]

Okay, thanks, that makes sense

[@Zireael1706]

@@RamanKasabrukhau And also for aero. For side pods to have a clear exit in some car designs.

[@Racing_Fox]

@@RamanKasabrukhauso the motion ratio can be adjusted by the rocker, you can change how much the damper moves for how much the wheel moves. It also takes a massive component out of the airflow and replaces it with a much aerodynamically cleaner pushrod

[@joanvegadagnino3373]

Is that a pull rod right????

[@agenteyowel2088]

Push rod

[@youtubearise26]

Breakdown of transmission i am also in a student formula team we want make some changes in transmission cannyou help

[@a2z67]

Hey bro Iam also a student In the formula Team we need some suggestions. So can you share your contact . Thank you .