Suzuki 800 Volusia C50 Bobber Kit Walkaround

[@Toddzilla72]

I love that you're giving these boring bikes a facelift and a totally new look. I'll be ordering my kit in the spring. Thanks for doing what you do. I looking for a way to do my volusia and I ran across your site and let's just say I'm extremely pleased that you make it so easy!

[@b_aleman]

I bought a 2005 SUZUKI VL800 yesterday after watching this video. I’ll be contacting you guys soon to place an order!

[@BlueCollarBobbers]

Congrats on our new VL800. You will love it as a bobber! Thanks so much, Lance and Cheryl

[@NhemF]

How did it turn out?

[@trainerpool8919]

Just ordered my kit

[@fromthe4gotten]

This bike is gorgeous, I'm a sycker for blue 😍 you guys definitely picked a great platform to make cheap builds on. Great job!!!!

[@Montuckymadness406]

I know this is years later but I have an ‘08 C50T and I fully intend to put at least the rear fender and seat on mine after having already put on 10” mini apes 🤘

[@BlueCollarBobbers]

thanks, we love making bobber kits and really appreciate all the nice people we have met. Lance and Cheryl

[@sll-tt6bj]

Do you offer bars other than drag bars?

[@Cosme422]

It's gorgeous! My c50 would love it but my wife would fight for her back seat :0 by the way, the music in the background was 100% not needed! So annoying. Great video quality!

[@BlueCollarBobbers]

Hi from down under, yes we ship to Australia all the time and it's fast and cheap. We make kits for the 750 aero's . We have a video on our website that covers the bike. It came out super clean! Check out the kits on our website! Hope this helps and thank so much, Lance at BCB

[@scottarmstrong4170]

Hi can those side covers be purchased on their own? Ive lost one of my stock ones. Id love to swap both out for those plate ones

[@BlueCollarBobbers]

Hi, yes our kits allow you to have a stock height. The bikes look much lower when you sit on them and the rear fender looks much lower than the stock one did. We always retain the stock front and rear suspensions. Thanks so much, Lance at BCB

[@BlueCollarBobbers]

Hi, We made kits for the Sportsters, but they were not popular. We dicontinued them. Since then the kits have become very desireable. Go figure?? I guess we should look into bringing them back! Thanks so much, Lance at BCB

[@BlueCollarBobbers]

Hi, we pay around $140-$180 for the pair. You will have to remove the bearings. The dealers can do that for you. You must also have the brake rotor and bearing diameters masked. Hope this helps. Thanks again, Lance and Cheryl at BCB

[@BlueCollarBobbers]

Thanks so much for the nice compliment. We love the kits and you will look awesome riding your new toy. Winter is a great time to bob your favorite bike. Thanks, Lance at blue collar bobbers

[@BlueCollarBobbers]

Hi from BCB, yes we send tons of stuff down under. The guys down there have been terrific.! We want to see your country some day. Thanks so much, Lance and Cheryl. Oh DHL is saying 2-3 day delivery and cheap shipping prices. Let us know when you are ready to order?

[@thatbeardednavyguy723]

that bobber looks great!

[@punisher6001]

Great Kit! I have a C-50 and I am hitching to do that!

[@BlueCollarBobbers]

Great to hear! We look forward to helping you transform your C-50 into an awesome bobber! Have a great day!!!

[@BlueCollarBobbers]

Hi, We will be adding kits this winter. Stay tuned?? Thanks so much, Lance at BCB

[@BlueCollarBobbers]

Thanks so much, We love the Volusia. It is not only an awesome looking bobber, but it is also a very comfortable and fun ride. You will love it!!!! Thanks so much, Lance and Cheryl at BCB

[@popebryanii7224]

I would like to make one of these into a sort of neo retro style harley style bike, with the thick tires and the single saddle. But with the big old fenders.

[@rickhill6475]

i,m speechless so great looking big Suzuki bike, LOVE IT!!!!

[@BlueCollarBobbers]

+boy hill Thanks so much!

[@577buttfan]

Thats a small bike the m109 is the big one.

[@JimmyBackbeat]

wow, that is pretty. I just about walked out of the store with a Volusia today. though I wonder if the small engine will hurt the experience in the long-run

[@BlueCollarBobbers]

You will absolutely love your new Volusia. If you turn it into a bobber, you won't want to go too fast. Everyone needs to see your new creation!! Thanks Lance

[@neilnorton8200]

Hey Lance, Mines lowered 3" and I love the ride, will the rear fender kit work with a lowered bike?

[@amarindersharma4798]

I really wish they made bobber kit for Suzuki Marauders as well :(

[@dougblankenship8639]

Great bike! Nice work. And you sound like a really nice dude. :)

[@jecarsepulveda8237]

This is sickk wow awesome job 👍🏼 i just got mines and i am looking to do some work to it wow

[@BlueCollarBobbers]

Hi Jecar, yes you will love to tinker with your 800. They are such nice bikes and deserve to be customized. Have fun!! Thanks so much, Lance and Cheryl at BCB

[@malguest320]

great looking bobber, I know you will get burnt off the exhaust, but is there any way you can make the exhaust without having to wrap. If you could use a chromed or stainless steel material to give it a really clean finish. still a great bike tho.

[@BlueCollarBobbers]

mal guest Unless you were to add extra heat shields the pipes will continue to burn. The wrap is the best way to insulate yourself from those hot pipes. Thanks! Lance @ BCB

[@BlueCollarBobbers]

Thanks, Our Volusia is an awesome bobber and extremely comfortable to ride. It feels "just right'! Lance at BCB

[@sll-tt6bj]

Lance do you offer other bars like pullback bars or beach bars other than the drag bars

[@kylebodenham4911]

Does anyone have any advice/recommendations for converting from floorboards to footpegs? Forward controls?

[@CheezeWhizzz]

Random question on an old video, but do you all sell that air box cover? I don't like the stock chrome look and I can't paint to save my life.

[@RomVlad]

Many of my parts on my Suzuki c50 came from Blue Collar Bobbers, very high quality, and I think an amazing transformation. Check out my quick, albeit not so well-done, video.

[@cherylwise3764]

Hi from BCB. We would love to see your video. Can you send a link? Thanks so much, Lance at BCB

[@kriselliott5866]

How much are your kits and what does it include also do you have a soft tail bobber version?

[@sll-tt6bj]

The only thing I don't like is the drag bars would rather pullbacks for more leverage

[@bubanner]

hi do you have a kit for a 83 suzuki gs 1100e..im gona bob it out but it would be easier if there was a kit.

[@shadez-_4k229]

can’t find anything for my 2007 c50 like they where scrubbed from the internet

[@josevargas3405]

Any online website? Trying to get the battery cover

[@Scorpiuszeroone]

Gorgeous!!!

[@jimmy5629]

do yous make a kit for the intruder didnt see on the web if ya dont are you gonna someday

[@whatsup9260]

are Suzuki C-50 VL800 Boulevard 2016 capable to take these mods from Blue Collar Bobbers ? also how confortable versus the original ?

[@MrKarpati]

Hi! Can I use volusia kit on vz800 marauder?

[@drewcheek7182]

Looking for a bobber kit for my 800 Suzuki maraudar any thoughts?

[@GunGuy258]

I love it!

[@stangy89]

BlueCollarBobbers does the Volusia C50 compare to the M50 in size?

[@7Scarecrows]

Anything for the Suzuki S50?

[@BlueCollarBobbers]

Hi Sorry, but we don't have kits for your 1100. Thanks so much, Lance at BCB

[@1_andonly_1]

BlueCollarBobbers are the fender and fender brackets strong enough to place a pillion pad on the rear for a passenger. Also with your kit can you retain the rear pegs

[@traynice9633]

Do you have a kit for a M50?..

[@martinsmith8167]

nice bike

[@FatManChubz]

Is the c50T the same thing as a c50?

[@unite4peaceonearth]

When you install this bobber kit they are both the same in the end.

[@marcosdesouza5529]

i love bobbers

[@mushroomcloud1]

Do the bars use the stock control cables?

[@TheMunem01]

One of the greatest classic bobber kits in the market, I wonder how its looks like if the C50 was equipped with fat rear tire kit like 280 along with the blue collar bobber kit. do you guys have any fat tire kits for the Suzuki C50 ??

[@BlueCollarBobbers]

Hi, We don't have fat tire kits. I'm not sure there would be enough room in the swing arm to go with a big tire. It may take a ton of modifications to make it work. Thanks so much, Lance at BCB

[@KevinModz65]

Nothing for the C90?

[@jeremeeelting241]

How much did it cost to do this

[@lakecrab]

do 1100 shadow spirit please.

[@GunGuy258]

I only wish you had fired it up so I could hear the pipes.

[@Ramon.Santiago]

I'm no new rider, but I found a deal I could not pads up. You think a 5ft 6 rider that's 170lbs could handle this fairly easily?

[@BlueCollarBobbers]

Hi Ramon, yes you could definitely handle this bike. It's super easy to ride and is so much fun! It would be a great fit!

[@nickm5466]

Ramon Santiago I'm 5'10 150 and I love this bike, one thing to know is the fatty front forks weigh a lot so don't let them steer you or drop during corners. great bike though overall

[@Ramon.Santiago]

SoKo it ended up getting snagged up by someone else. I'm checking out a yamaha virago 750 soon though

[@nickm5466]

another great bike, good luck on the buy and ride safe man

[@cherylwise3764]

No Problem. The 800 Suzuki's are easy to ride and super fun. Thanks so much, Lance at BCB

[@Willie.B76]

I need to export a Volusia kit to the UK are you able to expedite directly or do I need to arrange shipping?

[@BlueCollarBobbers]

Where are you located in the UK? We may have a distributor that could help you out.

[@Willie.B76]

Blue Collar Bobbers Hey guys, it's Will, you replied to an email I sent last week and put me in touch with your European distributor Hans in the Netherlands. I have since corresponded with him and will be ordering in the next 2 months. Many thanks for your help with this matter.

[@aramisaviation]

Volusia is the county, in Florida, where Daytona Beach is located. You pronounce it 'Voloosha' not 'Voluseeya'. Thanks.

[@BlueCollarBobbers]

Thanks for the info!

[@ozasia]

you guys deliver to sydney? please PM me.

[@zacharymenard602]

Where did you guys find the pegs to get rid of the floor boards?

[@cherylwise3764]

Our bike is the earlier Volusia model. It came from Suzuki with the pegs. I wonder if the Volusia pegs would fit the later C50's?? Thanks so much, Lance at BCB

[@zacharymenard602]

Cheryl Rauzon thank you I’m going to look into it

[@cherylwise3764]

Hi again. Our bike is the earlier Volusia model. They came from the factory with foot pegs. Thanks so much , Lance at BCB

[@TheCarablanco]

Start it up. . . let us hear it. Lose the soundtrack as well. Nice looking, no doubt.

[@dennisschell5543]

So this stuff won't work on a 96 Suzuki VS800 Intruder?

[@BlueCollarBobbers]

Unfortunately it won't fit on the VS800, but will fit on the VL800...Bummer!

[@godschosenephraim8922]

hi. can i just order the rear fender set up only? thats all i need!

[@BlueCollarBobbers]

+Ferrari Fresh If you are looking for the rear fender by itself, you can to this link...bluecollarbobbers.com/catalog/other-products Hope this helps! Feel free to call or email us at anytime! 801-676-7889 or [e-mail]

[@godschosenephraim8922]

ya i seen it , it says $269 and seems like it brings front and back , i juat wanted back no front. ty

[@BlueCollarBobbers]

We have a 5 5/8" wide fender or a 7 3/8" wide fender. They are $125 each.

[@BlueCollarBobbers]

The complete rear fender kit is $289 and comes with struts and everything you will need. These are the two options. Feel free to call or email us with further questions. 801-676-7889 or [e-mail]

[@godschosenephraim8922]

i need the 5 5\8 fender. does that comes with the brackets also

[@carlossaldana6]

Where I can get the kit for my 06 c50 boulevard?

[@BlueCollarBobbers]

At bluecollarbobbers.com bluecollarbobbers.com/suzuki-volusia-c50-800/