I just did similar swap with f20c from s2000. I kept 4wd transfer case and s2000 gauge cluster. My samurai is a whole new beast.
@logantate36293 жыл бұрын
I’m inexperienced with engine swaps, but looking to swap the engine on my Geo Tracker. Is it possible to swap & still keep 4wd?
@beqachorgoliani3 жыл бұрын
you stil 4wd after swap
@AnglingwithAyden3 жыл бұрын
Yes I still kept transfer case. Had to move back and relocate transfer case mounts and custom make driveshafts. It is amazing
@user-go1qs4nr4w2 жыл бұрын
Yhhu
@chillchinchilla28242 жыл бұрын
Why are you lying little benny
@ienjoyegg56942 жыл бұрын
I love how clean the build is that how you know there was effort there video does not do it justice 💪💪
@ThePlatypusReturns2 жыл бұрын
the black wrinkle paint job on the valve cover and intake manifold look great !
@amaghema982 жыл бұрын
Looking to do a similar swap, can i ask where you got the adapter plate?
@lmalesci2 жыл бұрын
Greetings from Florence, Italy I own a 2001 Suzuki Jimny 4x4 with m13a 1.3L petrol engine. All original that I use on dirt country roads. I also use it on farm and mountain tracks and on country roads when they are completely covered in snow! For me, the Suzuki Jimny is a good off-road vehicle which, due to its small off-road dimensions, is superior to the nissan patrol 4x4s which are limited mastodons in off-road compared to the Suzuki Jimny 4x4 which due to its small and compact size moves better off-road than any larger off-road vehicle such as the Land Rover Defender 4x4!
@muhammadpinongkosoeredjo Жыл бұрын
Setuju mas.. Satu selera
@riccardoguerra70662 жыл бұрын
Anche se non ne capisco l’utilità, da ex possessore di un Samurai, davvero complimenti. Avete fatto vermente un bel lavoro!💪🏻💪🏻💪🏻✊🏻✊🏻
@evangantley62763 жыл бұрын
Love it, is there still a transfer case and 4 wheel drive system? Also what braking system is in it now?
@kellyanderson7115 Жыл бұрын
I'm doing a G16B turbo engine for my Samurai. I've got forged rods. I'm having some CP forged pistons made with an 8.8:1 compression ratio. I have a source for a forged crank. It gets expensive real quick when you start swapping in forged pieces. My max HP target is 200. I'm going to start with a fairly modest 10 PSI limit. I really want to build a durable motor that holds up for a long time.
@kellyanderson7115 Жыл бұрын
Forgot to mention I'm going to be using a Haltech 1500 so I can do sequential fuel injection and a coil per cylinder. The Haltech will give my all of the flexibility I need to do the turbo tuning properly.
@manavsomal7834 Жыл бұрын
Hi,btw which transmission are you gonna be using,I'm planning on the same swap but my Sammy has a 4 speed manual and I ant to change it to Honda transmission but I want the 4wd to work along with that.
@FOXeye95 Жыл бұрын
@@manavsomal7834use the samurai 5speed
@Oddman1980 Жыл бұрын
Just so we're clear: * Solid axles * Leaf Springs front and rear * Aerodynamics of a box kite * Front steering stolen directly from a 1947 Ford 8N * *220 horsepower* I love this so much. I have a Samurai with 30's and a 4" lift, and believe me when I say the modified G13 engine that clatters away under my hood can start to make it feel sketchy. And it doesn't have half the power that K20 does. Amazing. I bet with that stock ride height, that yellow sami is a hoot to drive.
@Average12125 ай бұрын
its the perfect way to make you feel like you are going super fast without the real danger of 200mph
@Oddman19805 ай бұрын
@@Average1212 Hauling ass, fewer speeding tickets!
@adhdgypsy2 жыл бұрын
I Bought a 2002 SJ413 LWB as a project car, followed by another cause it had better body for parts and I daily drive a 12 year old Civic 4 Door Sedan (Auto, yes it's my Mon-Fri Car)... now the divergent thoughts won't stop... certainly helps validate the theory; all because of the efforts you put in towards making this video... I guess the project can start in couple of years... in the meantime will try to get the SJ413 (off)road-worthy
@zvarkfitzell45272 жыл бұрын
We put a 4age 1.8 out of a ae86 added a borgwarner 65mm turbo and put it in a 2 door flatbed hilux and kept the 4wd transfer case and built a 4 link suspension for the rear goes hard
@BYKTINOS293 жыл бұрын
Πρώτον βιντεαρα από πλάνα και μουσική και δεύτερον Σωτήρη είσαι μεγάλος μάστορας!!
@lifesentencemusic69977 ай бұрын
What transmission u guys put on adapted to it ?
@corrado2ful3 жыл бұрын
Μπράβο Σωτο και Μάνο, με την τρέλα σας κάνετε θαύματα!!!
@Turborev4 ай бұрын
Nice project,but next time put rubber matts on the fenders for protection on the paint.😮😢😮😢
@dresdenk2 жыл бұрын
Cool video! Thank you for producing this!
@VagcomDordrecht3 жыл бұрын
Nice swap! Maybe a rotex supercharger would be sick 🔥
@manher43352 жыл бұрын
Yes! That'd be the icing on the k20 cake ( ;
@malluturbo3 жыл бұрын
Really great works guys..awesome to see Suzuki gyspy with kswap!! Next time supercharge it..
@bennyadisuryo81512 жыл бұрын
Incredible. Exellent job. The best samuray ever
@buildingusa96042 жыл бұрын
That is sick an amazing build 🙌 👏
@Edwin777-z9x3 ай бұрын
This is addictive !😮
@سلطانالنشمي-ل1ه3 жыл бұрын
How I wish I could own a Suzuki Samurai with a Honda engine. It's really fun ✌️😍
@DjTeddyGram12 жыл бұрын
GOT SERIOUS WOOD FROM THAT KNOTTED EXHAUST MANIFOLD.... JEEEEEEEZ-LOU-EASE
@randydenney34028 ай бұрын
Where can I get full info on doing this swap
@jaythree19765 ай бұрын
I need that also.
@ThisReckless2 жыл бұрын
2:33 Damn chemtrails. Hey is this the same as the Jimmy? And were you able to AWD?
@rodolfovelez79153 жыл бұрын
Dónde puedo conseguir ese kit para adaptar el motor
@nickgibson11918 ай бұрын
This is my end game for my Sammy
@RobertSmith-gp6gu2 ай бұрын
Where did you get that instrument I anel? I'd like to buy one. Thank you. Also very nice ride.
@DerelictDan698 ай бұрын
I have a 4 door sport sidekick (wish I could afford a decent samurai) thing takes all afternoon to get up to highway speeds. K swap would be nuts.
@Mohalii2 жыл бұрын
love it. wait next update about this suzuki samurai
@androanto59535 ай бұрын
How do you change the drivetrain from a k24 to rwd? Im planning to make a k24 swapped Jimny too love from indonesia ❤
@rafaelsotelo59623 жыл бұрын
Excelente...pero no creen que hubieran agregado una suspencion neumatica para controlar la altura y asi "bajarlo" cuando circulas en carretera a alta velocidad, mejorarian el centro de gravedad, estetica y seguridad .
@saulespiritucruzbermudez77892 жыл бұрын
Tiene que bajarlo .
@abdielayala910 ай бұрын
do you install de transfer? can u use de 4x4 ?
@k24civic2 жыл бұрын
Are these like the sidekick bays? Would it be about the same?
@PressurenFlames2 жыл бұрын
K series does its magic once again.
@ThisisThailand Жыл бұрын
what is the price of set up like this one ? engine, gear ?
@irocjared Жыл бұрын
Did those graphics come on the car or did you put them on?
@christophermunoz2052 ай бұрын
I need this where you get the gauges from
@manavsomal7834 Жыл бұрын
Hi,I was just wondering does the 4wd still work with the s2000 tranny? Is there some way that 4wd works with the Honda tranny?
@osvaldoperez72057 ай бұрын
Is there anyway you guys can help me out in trying to find mounts and how to adapt the s2000 transmission
@jerryross8215 Жыл бұрын
92 geo where did u get that engine can I keep my 4x4?
@markmartin73842 жыл бұрын
the header looks beautiful, is it just RWD then?
@quinncheeseman Жыл бұрын
Hey is that still the suzuki gearbox ur using? If so how did you do that and where did you get a conversion kit? And do you still have low range etc?
@hydradiesel3 жыл бұрын
i am way to tempted to do this now
@CarlosJimenez-el8iw Жыл бұрын
What type of transmission you guys use
@jacksonchew95089 ай бұрын
May I know you match with what gearbox ??
@PWR_HOUSE Жыл бұрын
Any info on the trans set up?
@andyosorio8517 Жыл бұрын
What kind of gauge is that? Looks really nice!!!
@Theoriginalbubbafett2 жыл бұрын
I’ll be watching for it on COPART.
@edgarmartinez19893 жыл бұрын
Do you still have 4x4 with the new transmission or did you have to remove the transfer case ?
@stroked-up3 жыл бұрын
We removed it
@tompage84383 жыл бұрын
What drive-train upgrades have you done? Besides the s2000 trans. I own a Jimny and nobody does cool swaps because the driveline is apparently weak but the Sierras are different??
@Rey-vm9it11 ай бұрын
are u still riding on stock suspension?
@rifleman7313 Жыл бұрын
What transmission options are there for a Honda K20 (or any K-Series Engines)? What about automatic transmissions (as that would be what I would prefer? Thanks for any advice, opinions, or answers.
@twoeightythreez Жыл бұрын
Probably adapt the K series auto bell to an aisin or jatco automatic
@mpelspyros16353 жыл бұрын
Γαμιας!!!!!!! Σωτήρης ο καλύτερος με διάφορα 🔝🔝🔝🔝🔝
@luisrivera774813 күн бұрын
Looking to do the same thing does anybody sell the swap mounts?
@sammyboswelldirtybrc75802 ай бұрын
Would love to have this to rip some trails 🔥😎👍
@davidlaymance5036 Жыл бұрын
bruh the fuel economy must be heinous lol, sexy build
@autobodyrepairclearcoot41463 жыл бұрын
What Type TrNsimssion You Use Is Only Rwd Right Im Thinking Doing Same Swap
@alhashemi83512 жыл бұрын
That looks great, but how much this transformation cost?
@twoeightythreez Жыл бұрын
More than it's worth but thats not why people do stuff like this :)
@Loki-wn2bj2 жыл бұрын
So,is it still can be 4x4 drive?
@k-samurai50582 жыл бұрын
Do you have the motor mount template by chance?
@christiangreen612 Жыл бұрын
sickI i k20 swapped my feroza, only one in the world!
@blakewharemate1295 Жыл бұрын
Is this a custom exhaust manifold or off the shelf?
@stroked-up Жыл бұрын
----> 1:39 : )
@ziltus2 жыл бұрын
What is the shifter location like? Compared to the original
@stroked-up2 жыл бұрын
Its on the original location of the 4x4 shifter and a little bit higher
@allengonzalez32532 жыл бұрын
Can this be done on a 93 ja11 jimny?
@madro23152 жыл бұрын
What is that dash it looks amazing.
@stroked-up2 жыл бұрын
honda s2000 ap1
@UncannySense2 жыл бұрын
can it still crawl up the side of a mountain?
@MrHaydenJr2 жыл бұрын
what adpter did you run and how was the fitment for the shifter in the oem location?
@stroked-up2 жыл бұрын
the adapter is from jsp and the tunnel was custom , the transmission couldnt fit
@jaberaljalahmah20613 жыл бұрын
Nice video 👍 i have suzuki sj410 1983 its nice car ✌
@_PJ26412 жыл бұрын
That header tho’ 😍
@Gypsy_Boy2 жыл бұрын
Hi sir, what is the metal plate used Between engine and gearbox. ??
@СергейАсекретов-т2ч2 жыл бұрын
переходная плита
@sweet65mustang2 жыл бұрын
Im not sure where he got it but it is an adapter plate. The are companies that specialize in designing them for various combinations of auto manufacturers. I am just about ready to purchase one to put a vw tdi engine in my geo tracker.
@DIYWilly3 жыл бұрын
Decently faster than my vw tubo diesel samurai.. Cool video
@SotirisTPS3 жыл бұрын
Amazing! Θέλει μια γκαρετουλα να δούμε εργακι καλό
@pjoc16302 жыл бұрын
How much did this build cost?
@metalortu60233 жыл бұрын
Sick build, guys! Which model of mishimoto radiator is it?
@stroked-up3 жыл бұрын
From honda civic eg , painted black
@metalortu60233 жыл бұрын
Thank you very much! I’m also building a K20 samurai long body in my channel OrtuWorks (is in Spanish though)
@hectorfernandez8670 Жыл бұрын
How I can buy the swap parts?
@luisvargas50652 жыл бұрын
What’s tramo you mount
@georgegao31152 жыл бұрын
what a bad ass samurai
@HanifEFIMechanical3 жыл бұрын
Good work
@faizsayed53542 жыл бұрын
I have 1zzfe Toyota engine… I am facing some challenges Can you guide ?
@stroked-up2 жыл бұрын
Send us an email with your problem and we'll see if we can help in any way
@jeffreygarro17883 жыл бұрын
What trans are you using?
@stroked-up3 жыл бұрын
Honda s2000 ap1
@thanosmichos88343 жыл бұрын
Μπράβο παίδες!
@jesusisreal32093 жыл бұрын
just wondering why not the k24?
@matthewstorm51882 жыл бұрын
Possibly fitment? The K24 is somewhat taller than the K20.
@jesusisreal32092 жыл бұрын
@@matthewstorm5188 you may be right, what would be even better, mercury 470 with a 6049-scj head. = all aluminum 3.7L , slant it at a angle maybe
@apdeandja7682 жыл бұрын
Joss Mas Brow!!!
@steveortega534 Жыл бұрын
Hard AF!!
@ernestoalonsoi.g81152 жыл бұрын
original differentials?
@stroked-up2 жыл бұрын
Yes !
@abinchannel50653 жыл бұрын
Swap enggine good, i like offroad
@smalltown64242 жыл бұрын
Where do you get adapter plate?
@stroked-up2 жыл бұрын
Jsp fab !
@madro23152 жыл бұрын
Ese susukito debe andar durisimo llave.
@angelb7930 Жыл бұрын
Any more info on this built ..
@stroked-up Жыл бұрын
Please read the description under the video , thank you for watching!!
@21314002 жыл бұрын
So what engine u use to replace it Name model suzuki engine Isuzu engine Chevrolet engine. Can u be more specific if u want to help. When you're saying I replaced it with S 2000 that tells me nothing
@stroked-up2 жыл бұрын
We cant be specific with the k20 engine , honda used it in many car models , and if you dont understand the details in the description then its not the right video for you to watch
@kristalinos2 жыл бұрын
Ενα τιμονακι θέλει και ενα roll bar χειροποιητο, για να παιξει και μικρο soundbar αλλα wrangler.
@bombero57952 жыл бұрын
How much is a car like that worth?
@orestisPlayzBMG3 жыл бұрын
Noice Video go on like this
@Rey-nl9ne Жыл бұрын
Transmisi?
@ls4306 Жыл бұрын
Do you do undated
@stroked-up Жыл бұрын
hello , what do you mean by ?
@adriangreen25543 жыл бұрын
Cheap Jeep as we called them in the 80s. Different 🤣🤣💯
@thedietdecoder2 жыл бұрын
Stuck between doing a Toyota twincam conversion and this.. The choices...
@NOTYOURPROJECT5552 жыл бұрын
Great video mate! I love the samurai from Suzuki! You got my subscription definitely! Keep up good work and please more Suzuki Samurai videos! I also have a Samurai and building it! Just got spring over lift, winch and doing more soon! If interested please check my samurai as well!
@NOTYOURPROJECT5552 жыл бұрын
@anwar seid Hi mate if interested of samurai check my channel, ita got my history with suzuki samurai and the history is still ungoing!